Sennheiser Network Router LSP 500 PRO User Manual

Application Note  
LSP 500 PRO  
AN IS-1004 v1.0  
WLAN Router Reference  
To control the LSP 500 PRO via an iPad, a wireless network (WLAN) is required. In order to setup a WLAN for wirelessly controlling the  
LSP 500 PRO, you need a router which meets certain requirements. That is why we advise using only tested and recommended routers.  
A stable and reliable wireless control of the LSP 500 PRO is not possible with routers which are not compatible.  
For more information, please refer to the following sections of the LSP 500 PRO manual “Operating the LSP 500 PRO via a tablet” and  
“The operating menu / WLAN”.  
Router Specifications  
802.11 b/g compatible 2.4GHz WLAN Router, DHCP functionality, UDP multicast support, open or WPA2 protected WLAN  
Recommended routers  
These two models have been tested thorougly by us and have achieved the best performance regarding range, stability and reliability.  
We expressly recommend using one of these two models. Furthermore, it is important to perform the initial configuration recommended  
by the manufacturer. For further information refer to the instruction manual of the router or the website of the manufacturer.  
Initial configuration  
Brand  
Apple  
Model  
Tested Firmware  
with an iPad possible?  
Comments  
Airport Extreme  
A1521  
yes, first time OK then  
Airport config App  
required  
Buffalo  
WHR-HP-G300N  
DD-WRT v24SP2  
yes  
DD-WRTas standard firmware!  
Compatible routers  
Initial configuration  
Brand  
Allnet  
Model  
Tested Firmware  
1.0 Release 04  
with an iPad possible?  
Comments  
ALL02761  
yes  
slow recognition of LSPs  
Apple  
Airport Express  
A1264  
yes, first time OK then  
Airport config App  
required  
old plug model  
new desk model  
Apple  
Airport Express  
A1392  
yes, first time OK then  
Airport config App  
required  
Asus  
RT-N13U  
DIR-826L  
2.0.2.0  
1.01  
Popup on iPad - connection on WAN-  
Port needed  
D-Link  
no  
Multicasting must be enabled  
over menu (Network->Advanced-  
>Advanced Network->Enable IPv4  
Multicasting)  
Linksys  
Netgear  
E1200  
2.0.04  
yes (manual configuration)  
yes  
WNDR3700v4  
1.0.1.32  
iPad shows hotspot screen on first  
connect but then works  
Sennheiser electronic GmbH & Co. KG  
Am Labor 1, 30900 Wedemark, Germany  
AN IS-1004 v1.0 | 1/1  
 

Sharp Cash Register UP 700 User Manual
Sigma Water Heater Force Flow Heaters User Manual
Snapper Snow Blower 1 4299 User Manual
Sony Camera Accessories BRS 200 User Manual
Sony Cassette Player XR C450W User Manual
Sony Photo Printer DPP FP85 User Manual
Sony Portable Speaker SS CR190 User Manual
SOYO Computer Hardware SY 6ZB User Manual
Spirit Fitness Equipment XE395 User Manual
Sylvania Digital Photo Frame SDPF1089 User Manual