Southwestern Bell Telephone FT365 User Manual

2 - Line Telephone  
With Speakerphone  
STOP – DON’T TAKE ME BACK TO THE STORE.  
LOOK – FOR THE TOLL – FREE “ HELP ” TELEPHONE NUMBER.  
LISTEN– AS THE EXPERTS TALK YOU THROUGH THE PROBLEM.  
For immediate answers to your questions regarding operation,  
missing parts or installation, call the  
Southwestern Bell Freedom Phone ®  
Retail Sales Help Line at:  
1-800-366-0937  
Monday - Friday 8:30 a.m. - 9:00 p.m. EST  
Saturday 8:30 a.m. - 12:30 p.m. EST  
TOLL FREE HELP LINE  
1-800-366-0937  
SOUTHWESTERN BELL FREEDOM PHONE®  
7475 N. Glen Harbor Blvd., Glendale, AZ 85307  
FT 365  
IB – 3631  
Printed in China  
FT365 OWNER’S MANUAL  
 
Congratulations!  
Table of Contents  
You have purchased a 2 - LINE SPEAKERPHONE TELEPHONE which has been  
manufactured to the highest standards set by SOUTHWESTERN BELL  
FREEDOM PHONE ®. Please read this OWNER’S MANUAL thoroughly to  
become acquainted with the telephone’s many features.  
Important Safety Instructions................................................................................... 1  
Safety Instructions for Batteries ............................................................................ 2  
Unpacking, Telephone Installation.......................................................................... 4  
Location of Controls................................................................................................. 5  
Installation.................................................................................................................... 6  
Line Cord Connection............................................................................................... 6  
Power Adaptor............................................................................................................ 7  
Batteries ....................................................................................................................... 7  
Basic Operation.......................................................................................................... 8  
Pulse/Tone Switch.................................................................................................... 8  
Ringer Volume Controls .......................................................................................... 8  
Handset / Speakerphone......................................................................................... 8  
Speaker Volume Control.......................................................................................... 8  
Handset ( Receiver ) Volume Control ................................................................... 8  
Place A Call................................................................................................................ 9  
Answer A Call............................................................................................................. 9  
Obtain A Dial Tone Immediately After a Call Is Ended ................................. 9  
Feature Operation...................................................................................................... 10  
Memory Dialing........................................................................................................... 10  
Mute ............................................................................................................................. 11  
Lighted keypad........................................................................................................... 12  
Call Waiting/Flash..................................................................................................... 12  
Hold............................................................................................................................... 12  
ReturnToACallOnHold .......................................................................................... 12  
Conference ..................................................................................................................13  
Establish A Call  
UNPACKING  
Check the contents of the carton to be sure that you have:  
Telephone Base  
Handset, Coil Cord and Telephone Line Cord  
3.5mm to 2.5mm Headset Adaptor  
If anything is missing or damaged, contact the place of purchase. Keep the  
packaging to transport the telephone.  
Telephone Installation  
CAUTION  
1. Never install telephone wiring during a lightning storm.  
2. Never install telephone jacks in wet locations unless the jack is specifically  
designed for wet locations.  
3. Never touch uninsulated telephone wires or terminals unless the incoming  
telephone line has been disconnected at the network interface.  
4. Use caution when installing or modifying telephone lines.  
5. Always disconnect all telephone lines from the wall outlets before servicing or  
disassembling this equipment or replacing batteries. Read operating  
manual before using.  
While In Conference  
At The End Of A Conference Call  
Headset Jack ........................................................................................................... 14  
Line Status Operation.............................................................................................. 14  
Trouble Shooting...................................................................................................... 15  
Repair Service.......................................................................................................... 16  
FCC Wants You To Know...................................................................................... 17  
Cleaning...................................................................................................................... 17  
Limited Warranty ..................................................................................................... 18  
3
4
 
Location of Controls  
Installation  
Base  
Modular Wall Jack  
A modular wall jack is required to install your FT365.  
or  
Installation of this telephone in locations with 4-prong jacks  
or with hardwired outlets requires additional converters  
(not included). Contact your local telephone company or  
retailer concerning the proper converter.  
CoilCordConnection  
Insert the coil cord into the jack located on the bottom  
of the base. Connect the other end into the jack  
located on the handset.  
LineCordConnection  
To use both lines of a two-line telephone, two telephone numbers must be  
provided by your local telephone company. If you have only one telephone  
number, another line can be installed by your telephone company.  
For One Two-Line Jack  
Insert one plug of the 4-wire modular line cord (included) into the wall jack,  
making sure it snaps firmly in place. Insert the other plug of the 4-wire line cord  
into the telephone jack marked “LINE 1 + 2” (on back of base).  
For Two Single Line Jacks  
For two single line jacks, two separate line cords are needed for the connection.  
Insert one plug of the 4–wire line cord (included) into the first telephone wall  
jack. Insert the other plug of the 4–wire line cord into the telephone jack (back of  
unit) marked “LINE1+2”. Insert one plug of the second line cord (not included)  
into the second telephone wall jack. Insert the other plug of the second line cord  
into the telephone jack marked “LINE 2”  
6
5
 
Basic Operation  
PULSE/TONE SWITCH  
SET THIS SWITCH (on the side of base) TO THE SERVICE (PULSE or TONE)  
SUPPLIED TO YOUR PHONE. If you are not certain of which service you have,  
set the switch to TONE. Lift the HANDSET and press any number on the DIAL  
KEYPAD. If the dial tone persists, reset to PULSE.  
Power Adaptor  
RINGER VOLUME CONTROLS  
You can connect an optional Class 2 Power Adaptor (not included), which is  
listed to UL1310, for increased speakerphone performance. Connect the power  
adaptor into the DC Adaptor Jack (9VDC 100mA) on the back of the base and  
into the wall power outlet, You can purchase a Power Adaptor through our help  
line at 1-800-366-0937, our secure website at  
The RINGER VOLUME CONTROLS for both Line 1 and Line 2 (on the right side  
of the base) adjust the ringing volume of each individual line. Set the switch to  
HIGH, LOW, or OFF.  
HANDSET / SPEAKERPHONE  
http://www.swbfreedomphone.com or your local retailer.  
You can use either the HANDSET or SPEAKERPHONE mode during a  
conversation. During a call, one or the other can be used, and they can be  
interchanged at any time other than during dialing. The HANDSET is activated  
when the HANDSET is lifted off its cradle.  
Wall Mounting on a Wall Plate  
Your FT365 telephone is also designed to be mounted on a wall, which uses the  
“One Jack” option. Insert one plug of the short line cord into the wall jack, and  
insert the other plug into the telephone jack marked “LINE1+2”, making sure the  
plugs snap firmly in place, You can weave the cord through the notches on the  
bottom of the base. Position the wall mount slots on the bottom of the base over  
the two studs on the wall plate. Push down to lock in place.  
The SPEAKERPHONE is activated when you press the SPEAKERPHONE  
BUTTON, and the SPEAKERPHONE BUTTON will then light.  
At the end of the call, press the SPEAKERPHONE BUTTON again, and the  
SPEAKERPHONE BUTTON will turn off. To switch from the SPEAKERPHONE to  
the HANDSET, lift the HANDSET. To switch from the HANDSET to the  
SPEAKERPHONE (without losing the call), press the SPEAKERPHONE  
BUTTON first before you place the HANDSET in the cradle, and the  
SPEAKERPHONE BUTTON will light.  
Wall Mounting on Two Screws  
If you do not have a wall phone plate and want to install your FT365 onto the  
wall, fasten two screws (not included) into the wall, using anchors for secure  
assembly. Locate the screws 3 1/4 apart vertically. They should extend 3/16 from  
the wall. Insert one plug of long 4-wire line cord into the wall jack, and insert the  
other plug into the telephone jack marked “LINE1+2”, making sure the plugs  
snap firmly in place. You can weave the cord through the notches on the bottom  
of the base, Position the wall mount slots on the bottom of the base over the two  
screws on the wall. Push down to lock in plage.  
SPEAKER VOLUME CONTROL  
When using the Speakerphone, adjust the speakerphone loudness by moving  
the SPEAKER VOLUME CONTROL (on the side of the base) from LOW to HIGH.  
HANDSET (RECEIVER) VOLUME CONTROL  
When speaking through the handset, adjust the receiver loudness of the  
handset by moving the RECEIVER VOLUME CONTROL ( on the side of the  
handset ) to NORM or HIGH.  
BATTERIES  
Four 1.5 - volt AAA alkaline batteries (not included) are required to work the  
telephone functions properly.  
In normal use, the batteries will last approximately six months.  
Install the batteries into the compartment on the bottom of the telephone:  
1. OpentheBATTERYCOMPARTMENTCOVER.  
2. Insert the batteries, matching the plus and minus signs  
in the COMPARTMENT.  
3. Replace the COVER.  
8
7
 
Basic Operation  
Feature Operation  
PLACE A CALL  
MEMORY DIALING  
Your FT365 is equipped with 16 memories (six priority speed dial, ten keypad )  
for programming your most frequently dialed telephone numbers. You can store  
up to 32 digits in each of the speed dial keys (1-6) near the top of the phone, or  
in each of the translucent dialing keys (0-9).  
Numbers must be stored with the HANDSET lifted. They will be stored as dialed,  
in the PULSE or TONE mode.  
1. Lift the HANDSET (or press the SPEAKERPHONE BUTTON).  
You will hear a dial tone, and the activated LINE 1 / LINE 2 ( or the  
SPEAKERPHONE) button will light.  
2. Press LINE 1 or LINE 2 BUTTON to switch to the other line. The newly  
activated LINE 1 / LINE 2 BUTTON will light.  
3. When you hear a dial tone, dial the number.  
To enter numbers on the MEMORY INDEX CARD, pry out the plastic cover, take  
out the card, make your entries, then reinsert the CARD and COVER.  
Mixed Dialing: If you have Pulse Service, you can temporarily switch to Tone  
dialing if required for various custom services. Press the “ * ” BUTTON and all  
further dialing functions will be in the TONE mode, until you end the call.  
To Program A Number Into Memory  
1. Lift the HANDSET. You will hear a dial tone.  
2. Press the STORE BUTTON.  
3. Using the KEYPAD, enter the telephone number  
you wish to store (32 digit maximum).  
4. Press the STORE BUTTON again.  
5. Press one of the SPEED DIAL KEYS ( 1-6) near  
the top of the phone or the translucent dialing keys (0-9). The telephone  
number will be stored in this location.  
4. At the end of the call, return the HANDSET to the CRADLE or, if you used the  
SPEAKERPHONE, press the SPEAKERPHONE BUTTON again.  
The lit buttons and keypad will go off.  
6. To continue programming a telephone number into another memory location,  
repeat steps 2-5. To end programming numbers, return the HANDSET to the  
CRADLE.  
ANSWER A CALL  
7. The telephone number can be dialed on either LINE 1 or LINE 2.  
When a call is received, the LINE 1 or LINE 2 button will flash, to indicate which  
line is ringing.  
1. Lift the HANDSET (or press the SPEAKERPHONE BUTTON) to answer the  
call. The activated LINE1/LINE2 ( or the SPEAKERPHONE ) button will be lit  
solid.  
2. When the conversation is completed, hang up the telephone or press the lit  
LINE 1 / LINE 2 button. The lit buttons and keypad will go off.  
NOTE: Your FT365 features two distinct rings, one for each line.  
OBTAIN A DIAL TONE IMMEDIATELY AFTER A CALL IS ENDED  
At the end of a call, if you wish to start another call without hanging up the  
handset, press the FLASH BUTTON. You will hear a dial tone.  
9
10  
 
Feature Operation (con’t)  
Feature Operation (con’t)  
TO ERASEA STORED NUMBER:  
To erase a stored number, simply store a new number in the same location. The  
new number will replace the previous one.  
LIGHTED KEYPAD  
A lighted keypad is provided for better visibility.  
NOTE: In both the SPEAKERPHONE and HANDSET MODES, the keypad will light  
while a phone number is dialed. While in the SPEAKERPHONE MODE, the  
keypad will slowly turn off within 5-10 seconds after a phone number is dialed.  
In the HANDSET MODE, the keypad will remain lit for as long as the HANDSET  
is off the CRADLE.  
TO DIAL PRIORITY NUMBERS  
1. Lift the HANDSET or use the SPEAKERPHONE.  
2. Refer to the “PLACE A CALL” section to choose the desired  
LINE1/LINE2.  
CALL WAITING/FLASH  
3. Press the desired SPEED DIAL KEY (1-6) near the top of the unit.  
4. Your programmed telephone number will automatically be dialed.  
IFCALLWAITINGSERVICEISAVAILABLEFROMYOURTELEPHONECOMPANY  
AND YOU HAVE THIS SERVICE, you will be alerted by a signal (determined by  
your telephone company) if there is another call.  
TO DIAL KEYPAD MEMORY NUMBERS  
1. Lift the HANDSET or use the SPEAKERPHONE.  
2. Refer to the “PLACE A CALL” section to choose the desired  
LINE 1 / LINE 2.  
3. Press the MEMORY BUTTON.  
4. Press the desired translucent dialing key (0-9) on the  
keypad.  
NOTE: Your conversation will be muted momentarily during this signal.  
1. When you hear the signal, to access the new call  
without disconnecting the call you are on, press  
the FLASH BUTTON.  
2. To return to your original conversation, press the  
FLASH BUTTON again.  
5. Your programmed telephone number will automatically be dialed.  
This procedure can be repeated as frequently as you desire. (Refer to your  
Telephone Company’s instructions for this service.)  
The FLASH BUTTON can also be used to access a new dial tone without  
hanging up, or to access other custom telephone company services.  
CHAIN/COMBINATION DIALING  
NUMBERS IN TWO OR MORE MEMORY LOCATIONS CAN BE DIALED IN  
SEQUENCE, AND COMBINED MANUAL AND MEMORY DIALING IS POSSIBLE IN  
EITHER ORDER.  
This is especially convenient when using a long distance custom service that  
requires more than 32 digits.  
HOLD  
THE PARTY YOU ARE CONVERSING WITH CAN BE PUT ON HOLD.  
1. Whether you are using the HANDSET or SPEAKERPHONE,  
press the HOLD BUTTON. The LINE 1 / LINE 2 BUTTON will flash  
slowly (and the SPEAKERPHONE BUTTON LED will go off).  
REDIAL  
THE LAST NUMBER YOU DIALED, MANUALLY OR BY SPEED  
DIALING, CAN BE REDIALED AUTOMATICALLY. The maximum  
number of digits that can be redialed is 32.  
1. Lift the HANDSET, or use the SPEAKERPHONE.  
2. Refer to the “PLACE A CALL” section to choose the desired LINE1/LINE2.  
3. When you have a dial tone, press the REDIAL BUTTON. The number will be  
automatically dialed.  
RETURN TO A CALL ON HOLD:  
a.Lift the HANDSET (or press the SPEAKERPHONE BUTTON).  
The LINE 1 / LINE 2 (and SPEAKERPHONE) buttons will be  
lit solid, and this call is no longer on Hold.  
NOTE: - A call on Hold can be picked up by any single–line telephone connected on  
the same line.  
- When the call is on Hold, do NOT press the HOLD BUTTON a second time to  
release the hold.  
- There will be a brief pause after releasing the hold before you can hear the  
caller.  
b. If you are not already connected to the caller, press the LINE BUTTON with the  
IN USE LED flashing.  
MUTE  
Prevent sound from your room from being heard by another party on the phone.  
Press and hold the MUTE BUTTON for as long as you want this feature  
activated. Once you release the MUTE BUTTON, the outside caller can hear you  
again.  
11  
12  
 
Feature Operation (con’t)  
Feature Operation (con’t)  
CONFERENCE  
ESTABLISH A CALL:  
The CONFERENCE BUTTON establishes a three-way conversation with you and  
the callers on Lines 1 and 2.  
a. Make a call to one outside party.  
HEADSET JACK  
You can connect a headset (not included) for hands-free conversations.  
1. Insert the headset plug (must be 5/32 inch / 3.5mm type) into the headset  
jack on the side of the base. You may need to lift the rubber protective cover  
from the jack.  
The activated LINE 1 / LINE 2 BUTTON will be lit solid.  
b. Press the HOLD BUTTON.  
The activated LINE 1 / LINE 2 BUTTON will flash rapidly.  
c. Press the other LINE BUTTON.  
You will hear a dial tone, and the second activated LINE 1 / LINE 2 BUTTON  
will be lit solid.  
2. Adjust the headset microphone to a comfortable position, placing it near your  
mouth.  
3. Press the SPEAKERPHONE BUTTON to make or receive a call. Adjust the  
volume to a desirable level by moving the speaker volume switch (on the side  
of the base).  
NOTE:  
d. Make a call to the second outside party.  
e. Press the CONFERENCE BUTTON, and the LINE 1 and LINE 2 BUTTONS will  
both be lit solid. YOU can now speak with both callers at the same time.  
NOTE: In the conference mode, there may be a slight decrease in volume for the  
2 callers.  
1. If you are using a headset (not included) with a 2.5mm plug, attach the  
headset adaptor (included) to the headset jack (on the side of the base).  
Then insert the headset plug into the adaptor.  
2. You can purchase a suitable headset through our help line at  
1-800-366-0937, or our secure website at  
WHILE IN CONFERENCE:  
To put one caller on hold, press the HOLD BUTTON, and the LINE 1 and LINE 2  
BUTTONS will alternately flash.  
If you wish to continue speaking with the caller on Line 1, press the LINE 1  
BUTTON, and that button will be lit solid. If you wish to speak with the caller on  
Line 2, press the LINE 2 BUTTON, and that button will be lit solid.  
To return to the conference call (and speak with both callers), press the  
CONFERENCE BUTTON. The LINE 1 / LINE 2 BUTTONS will both be lit solid.  
LINE STATUS OPERATION  
STATUS  
LINE 1 BUTTON LINE 2 BUTTON  
AT THEEND OF A CONFERENCE CALL:  
LED  
LED  
To speak to one party and disconnect the other, press the LINE BUTTON for the  
caller with which you wish to continue the conversation, The other caller will be  
disconnected. To disconnect both parties, hang up the handset or press the  
SPEAKERPHONE BUTTON (if you are already in the speakerphone mode).  
ON HOOK  
OFF  
OFF  
LINE 1 RINGING FLASH RAPIDLY OFF  
LINE 1 IN USE  
LINE 1 HOLD  
LIT SOLID  
OFF  
FLASH SLOWLY OFF  
LINE 2 RINGING OFF  
FLASH RAPIDLY  
LIT SOLID  
FLASH SLOWLY  
LINE 2 IN USE  
LINE 2 HOLD  
OFF  
OFF  
CONF. MODE  
LINES 1 & 2  
HOLD  
ON  
ON  
FLASH SLOWLY FLASH SLOWLY  
13  
14  
 
TROUBLE SHOOTING  
Repair Service  
If the solution to your problem is not listed below, call our toll-free SERVICE  
NUMBER 1-800-366-0937, Monday - Friday 8:30 a.m. - 9.00 p.m. (EST), and  
Saturday 8:30 a.m.- 12:30 p.m. (EST). You can also visit our website at  
According to FCC regulations, this equipment, which has been certified and  
registered by the FCC, may only be repaired by authorized persons. If repairs or  
adjustments are made by an unauthorized person, the FCC certification may be  
voided. Should your encounter any problems, please call the  
Southwestern Bell Freedom Phone ® toll-free Customer Help Line for  
assistance:  
PROBLEM  
No dial tone.  
POSSIBLE CAUSE  
Improper Installation.  
CORRECTION ACTION  
Recheck all modular plug connections. Press  
the corresponding key (Line 1or Line 2).  
Try another phone jack. If your phone works  
on another jack, you may have a problem with  
your wiring. Contact your local phone  
company.  
Monday - Friday 8:30 am - 9:30 p.m. (EST). and Saturday 8:30 a.m - 12:30 p.m.  
(EST). You can also visit our website at http://www.swbfreedomphone.com  
Problem with the wiring.  
FOR IN-WARRANTY SERVICE:  
Package your complete unit (including all line cords, and other accessories) and  
ship the unit postage prepaid* and insured (for your protection) to:  
Cannot make outgoing calls. Tone/Pulse switch is not set correctly. Check the Tone/Pulse switch. If positioned in  
tone mode, switch to pulse, as you may have  
pulse dialing service.  
Set the Ringer Off/Low/High switch to the  
Low or High position.  
SOUTHWESTERN BELL FREEDOM PHONE ®  
DEPT.: In Warranty  
7475 N. Glen Harbor Blvd., Glendale, AZ 85307  
The phone does not ring.  
Ringer Off/Low/High switch is not set  
correctly  
Too many telephones are installed on Contact your telephone company to  
Be sure to include your return address, proof of purchase, a daytime phone  
number, $9.50 for postage and handling*, and a brief explanation of your  
difficulties.  
* NOTE: California residents need only provide proof of purchase and should  
call 1-800-366-0937 for shipping instructions.  
the same line.  
determine the maximum number of extensions  
for your calling area.  
Memory dialing does not  
work.  
The memory storage procedure was not Carefully review the store sequence and  
followed correctly.  
reenter your programmed number.  
The sound volume is too  
low .  
Another extension is off hook.  
Hang up extension.  
FOROUT-OF-WARRANTYSERVICE:  
Receiver volume control is too low  
Adjust receive volume control level.  
you may call our toll-free Help Line for the price of a replacement before  
returning your unit. Please follow all instructions for In – Warranty Service  
(above) to return your unit, and mark the package: DEPT.: Out - of - Warranty.  
Cannot hear any sound or  
dial tone through the  
handset or speakerphone.  
The hold function does not The batteries need to be replaced or  
work.  
The LINE 1 or LINE 2  
BUTTONS do not light or  
are too weak.  
The headset may still be connected to Unplug the headset from the FT365 base,  
the unit.  
and make the call through the handset or  
speakerphone.  
Install four fresh AAA batteries before initial  
use  
QUESTIONS?  
STOP ... DON’T TAKE ME BACK TO THE STORE.  
LOOK...FOR THE TOLLFREEHELPTELEPHONE NUMBER.  
LISTEN... AS THE EXPERTS TALK YOU THROUGH THE PROBLEM  
have not been installed.  
The batteries have not been installed or Install four fresh AAA batteries before initial  
need to be replaced.  
use.  
The LINE 2 BUTTON is  
constantly lit solid.  
Only a single line jack is Connected.  
The telephone may not be connected to numbers to use both the Line 1 and Line 2  
the correct jack. (on the back of the  
base).  
The conference mode may be activated. Press one of the LINE BUTTONS to release  
the conference mode.  
You must have 2 separate telephone  
For immediate answers to your questions regarding operation, missing parts or  
installation, call the  
functions. Refer to page 6 for installation  
instructions.  
Southwestern Bell Freedom Phone ® Help Line:  
1-800-366-0937  
Hear both a dial tone and  
the outside caller.  
HEARING AID COMPATIBILITY  
Your FT365 is compatible with inductively coupled hearing aids.  
15  
16  
 
FCC Wants You To Know  
Limited Warranty  
The obligation of Southwestern Bell Freedom Phone ® Retail Sales under this  
warranty shall be limited to repair or replacement (at our option) during the  
warranty period of any part which proves defective in material or workmanship  
under normal installation, use and service, provided the product is returned to  
Southwestern Bell Freedom Phone ® Retail Sales or to one of our authorized  
Service Centers TRANSPORTATION CHARGES PREPAID. (California residents  
should call 1-800-366-0937 for shipping instructions.) Products returned to us  
or to an Authorized Service Center must be accompanied by a copy of the  
purchase receipt In the absence of such purchase receipt, the warranty period  
shall be one (1) year from the date of manufacture.  
To obtain service under this warranty, return the defective product to the service  
center nearest you together with your sales slip and $9.50 for postage and  
handling. California residents need only provide proof of purchase. You may  
also have other warranty rights which vary from state to state.  
This equipment complies with Part 68 of the FCC rules. On the bottom of the  
base of this equipment is a label that contains, among other information, the  
FCC Registration Number and Ringer Equivalence Number (REN) for this  
equipment. You must, upon request, provide this information to your telephone  
company.  
The REN is useful to determine the quantity of devices you may connect to your  
telephone line and still have all of those devices ring when your telephone  
number is called. In most, but not all areas, the sum of the RENS of all devices  
connected to one line should not exceed five (5.0). To be certain of the number of  
devices you may connect to your line, as determined by the REN, you should  
contact your local telephone company to determine the maximum REN for your  
calling area.  
If your telephone equipment, causes harm to the telephone network, the  
telephone company may discontinue your service temporarily. If possible, they  
will notify you in advance. But if advance notice isn’t practical, you will be notified  
as soon as possible. You will be informed of your right to file a complaint with  
the FCC.  
This warranty shall be invalid if the product is damaged as a result of  
defacement, misuse, abuse, neglect, accident, destruction, or alteration of the  
serial number, improper electrical voltages or currents, repair, alteration or  
maintenance by any person or party other than our own service facility or an  
authorized service center, or any use violative or instructions furnished by us.  
This warranty is also rendered invalid if this product is removed from the country  
in which it was purchased, if it is used in a country in which it is not registered  
for use, and/or if it is used in a country for which it was not designed. Due to  
variations in telephone systems and communications laws, this product may be  
illegal for use in some countries. Southwestern Bell Freedom Phone ® Retail  
Sales assumes no responsibility for damages or penalties incurred resulting  
from the use of this product in a manner or location other than that for which it is  
intended.  
This one-year warranty is in lieu of all other expressed warranties, obligations, or  
liabilities. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES,  
INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF  
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE  
LIMITED IN DURATION TO THE ONE-YEAR DURATION OF THIS WRITTEN  
LIMITED WARRANTY. Some states do not allow limitations on how long an  
implied warranty lasts, so the above limitations may not apply to you.  
IN NO EVENT SHALL WE BE LIABLE FOR ANY SPECIAL, INCIDENTAL OR  
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER  
WARRANTY, EXPRESSEDORIMPLIED1, WHATSOEVER.  
Your telephone company may make changes in its facilities, equipment,  
operation or procedures that could affect the proper functioning of your  
equipment. If they do, you will be notified in advance to give you an opportunity to  
maintain uninterrupted telephone service. If you experience trouble with this  
telephone equipment disconnect from the network until the problem has been  
corrected or until you are sure that the equipment is not malfunctioning. This  
equipment may not be used on coin service provided by the telephone company.  
Connection to party lines is subject to state tariffs. This equipment is hearing aid  
compatible.  
Warning : Changes or modifications to this unit not expressly approved by the  
party responsible for compliance could void the user’s authority to operate the  
equipment.  
Cleaning  
Use a damp cloth for cleaning.  
Never use abrasives or solvents in cleaning.  
Never spray cleaners directly on the telephone.  
Some states do not allow the exclusion or limitation of special, incidental or  
consequential damages, so the above limitation or exclusion may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights  
which vary from state to state.  
17  
18  
 
 

Sharp Calculator EL9900 User Manual
Sharp Microwave Oven R 754M User Manual
Shiro Telephone SB2122 User Manual
Singer Sewing Machine 111W106 User Manual
Solo USA Radar Detector R D 5 1 1 0 User Manual
Sony MP3 Player D 193 User Manual
Sony Stereo Receiver STR DN1050 User Manual
Source Technologies Printer ST9620 User Manual
Southern Pride Smoker SC 100 User Manual
Symbol Technologies Network Card LA 5030 User Manual