Stanton CD Player C402 User Manual

C.402  
/
USER MANUAL  
 
IMPORTANT TO SAFETY  
FOR U.S.A. & CANADA MODEL ONLY  
WARNING:  
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT  
USE THIS PLUG WITH AN EXTENSION CORD,  
RECEPTACLE OR OTHER OUTLET UNLESS THE  
BLADES CAN BE FULLY INSERTED TO PRESENT  
BLADE EXPOSURE.  
CAUTION  
TO PREVENT ELECTRIC SHOCK DO NOT USE THIS  
(POLARIZED) PLUG WITH AN EXTENSION CORD,  
RECEPTACLE OR OTHER OUTLET UNLESS THE  
BLADES CAN BE FULLY INSERTED TO PREVENT  
BLADE EXPOSURE.  
TO PREVENT FIRE OR SHOCK HAZARD. NO NOT  
EXPOSE THIS APPLIANCE TO RAIN OR NOISTURE.  
TO PREVENT ELECTRICAL SHOCK, MATCH WIDE  
BLADE PLUG TO WIDE SLOT AND FULLY INSERT.  
NOTE:  
This CD player uses a semiconductor laser. To allow you to  
enjoy music at a stable operation, it is recommended to use  
this in a room of 5OC 41OF - 35OC 95OF.  
CAUTION:  
1. Handle the power supply cord carefully  
Do not damage or deform the power supply cord. If it is  
damaged or deformed, it may cause electric shock or  
malfunction when used. When removing from wall outlet,  
be sure to remove by holding the plug attachment and  
not by pulling the cord.  
2. In order to prevent electric shock, do not open the  
top cover. If a problem occurs, contact your dealer.  
CLASS 1 LABEL  
CAUTION:  
USE OF CONTROLS OR ADJUSTMENTS OR  
REFORMANCE OF PROCEDURES OTHER THAN  
THOSE SPECIFIED HEREIN MAY RESULT IN  
HAZARDOUS RADIATION EXPOSURE.  
RATING LABEL  
3. Do not place metal objects or spill liquid inside the  
CD player. Electric shock or malfunction may result.  
Please, record and retain the Model name and serial  
number of your set shown on the rating label.  
Model No. ___________ Serial No. ___________  
CAUTION: TO REDUCE THE  
RISK OF ELECTRIC SHOCK,  
DO NOT REMOVE THE COVER  
(OR BAC K) . NO USER-  
SERVICEABLE PARTS INSIDE.  
REFER SERVICING TO QUALIFIED SERVICE  
PERSONNEL.  
THE COMPACT DISC PLAYER SHOULD NOT BE  
ADJUSTED OR REPAIRED BY ANYONE EXCEPT  
PROPERLY QUALIFIED SERVICE PERSONNEL.  
DOUBLE INSULATED - WHEN SERVICING, USE ONLY  
IDENTICAL REPLACEMENT PARTS.  
The lightning flash with arrowhead symbol,  
within an equilateral triangle, is intended to  
alert the user to the presence of un-  
insulated "dangerous voltage" within the  
product's enclosure that may be of sufficient  
magnitude to constitute a risk of electric  
shock to persons.  
NOTE:  
This unit may cause interference to radio and television  
reception.  
Line Voltage Selection (for multiple voltage  
model only)  
The exclamation po  
within an equilateral  
The desired voltage may be set with the  
VOLTAGE SELECTOR switch on the rear  
panel, using a screwdriver.  
triangle is intended to alert the user to the  
presence of important operating and  
maintenance (servicing) instructions in the  
literature accompanying the appliance.  
Do not twist the VOLTAGE SELECTOR  
switch with excessive force as this may  
cause damage.  
If the VOLTAGE SELECTOR switch does not move  
smoothly, please contact a qualified serviceman.  
2
 
NOTE ON USE  
Allow for sufficient heat dispersion when installed in a rack.  
Handle the power cord carefully.  
Hold the plug when unplugging the cord.  
Keep the set free from moisture, water, and dust.  
Unplug the power cord when not using the set for long periods of time.  
Do not obstruct the ventilation holes. (For sets with ventilation holes.)  
Do not place foreign objects in the set.  
Do not let insecticides, benzene, and thinner come in contact with the set.  
Never disassemble or modify the set in any way.  
For 120 volt use in USA, USA nema style 120 volt plug. For other countries, use proper plug for the local outlet.  
MAIN FEATURES  
(1) 8 times oversampling, 1 bit D/A converter.  
(2) 4 different scan speeds.  
(3) Frame search.  
(4) Auto cue.  
(5) Pitch display.  
(6) Digital output.  
MAIN UNIT  
1
3
4
2
6
5
(1) DIGITAL OUT SOCKET  
(2)  
BALANCED OUTPUT L/R  
(3) AC IN  
(4)  REMOTE START  
(5) VOLTAGE SELECTOR (Just for Dual Voltage only)  
(6)  
AUDIO OUTPUT L AND R  
1
3 4 5 6 7 8 9 10 11 12 13  
2
/
21  
20 19 18 17 16 15 14  
(1) POWER BUTTON  
(5) TIME  
(2) DISC HOLDER  
(3) OPEN/CLOSE  
(4) SGL/CTN  
(6)  
TRACK BACKWARD (7) +10/ FOLDER  
(8)  
TRACK FORWARD  
(12)  
(9) RELOOP  
(10)  
F.BACKWARD  
(11)  
F.FORWARD  
LCD  
(13)PITCH SLIDER  
(17)PLAY/PAUSE  
(21)JOG WHEEL  
(14) PITCH LOCK  
(15) PITCH+/-  
(16) PITCH RANGE  
(18) LOOP OUT  
(19) CUE  
(20) LOOP IN  
3
 
MAIN FEATURES  
LCD  
1
34 5
6
7
8
8 9
2
17 16 15 14 13  
11  
10  
12  
12  
(1) PLAY/PAUSE INDICATOR  
(4) SINGLE INDICATOR  
(7) LOOP INDICATOR  
(2) CUE INDICATOR  
(5) MP3 INDICATOR  
(8) RELOOP INDICATOR  
(3) FOLDER/TRACK INDICATOR  
(6) TIME BAR INDICATOR  
(9) PITCH INDICATOR  
(10) PITCH METER  
(11) TIME DISPLAY  
(12) CHARACTER DISPLAY  
(13) ELAPSED INDICATOR  
(14) REMAIN INDICATOR  
(15) TOTAL REMAIN INDICATOR  
(16) TRACK INDICATOR  
(17) AUTO CUE  
PREPARATIONS  
1. Checking the Contents  
Check that the carton contains the following items:  
1) Main unit 2) Pair of RCA cables 3) Operating instructions (this booklet)  
4) Power cord  
NAMES AND FUNCTIONS  
Main Unit  
(1) DIGITAL OUT SOCKET  
Coaxial (S/P DIF) digital output for use with audio  
devices equipped with coaxial (S/P DIF) digital input  
such as digital mixing consoles and computer audio  
cards.  
(4) REMOTE START  
when  
The player is paused  
a Remote Switch is pressed  
once; when touched again, it starts playing.  
(5) VOLTAGE SELECTOR (Just for Dual Voltage only)  
(2) BALANCED OUTPUT  
Select 115V or 230V according to the local voltage.  
Connect other appliances with balanced output easily.  
(6) AUDIO OUT  
(3) AC IN  
The audio signals from each player are output from  
Plug in the power supply cable here.  
these jacks.  
4
 
NAMES AND FUNCTIONS  
Main Unit  
(1) POWER (Power ON/OFF Switch)  
(13)PITCH SLIDER  
When the POWER switch is pressed, the power turns  
Use the slider to adjust the CD pitch. Slide up to  
on.  
decrease the pitch, down to increase the pitch.  
(2) DISC HOLDER  
(14)PITCH LOCK  
Place the discs in the holder. Press the OPEN/CLOSE  
button to open and close the disc holder.  
Use this button to enable or disable BPM  
adjustment with the pitch sliders. BPM adjustment with  
the pitch sliders is disabled when the PITCH LED lights.  
(3) OPEN/CLOSE  
Press this button to open and close the disc holder. The  
disc holder cannot be opened during playback, so stop  
playback before pressing the button.  
(15)PITCH +/- BUTTON  
+ The CD speeds up while this button is pressed.  
Release the button to return to the original BPM.  
- The CD slows down while this button is pressed.  
Release the button to return to the original BPM.  
(4) SGL/CTN (Single/Continuous Button)  
Press this button to switch between single and continuous  
play modes. SINGLE mode is indicated by the  
SINGLE indicator on the LCD.  
(16)PITCH RANGE  
Choose from pitch percentages of 4%, 8% and 16%.  
(17)PLAY/PAUSE  
(5) TIME (Time Button)  
Use this button to start playback. Press once to start  
playback, once again to set the pause mode, and once  
more to resume playback.  
Press this button to switch the time display among the  
elapsed time and remaining time and total remaining time  
of the disc.  
(18)LOOP OUT  
(6)  
TRACK BACKWARD  
Use this button to go back to the beginning of the  
current track or select a previous track for playing.  
Used for setting the end loop point and releasing the loop  
action.  
(19)CUE (Cue Button)  
(7) +10/ FOLDER  
Press the CUE button during playback to return to the  
position at which playback started.  
CD mode, use this button to skip ahead 10 tracks.  
Mp3 mode, press this button to select next folder.  
(20)LOOP IN  
(8)  
TRACK FORWARD  
Use this button to skip to the next CD track.  
Used for setting a start loop point and releasing the  
loop action.  
(9) RELOOP  
(21)JOG WHEEL(JOG dial)  
Depending on mode, as explained further, this button is  
When the dial is turned during CD pause, the point at  
which the sound is being produced moves by a number  
of frames corresponding to the number of clicks.  
Clockwise moves the point forward, counterclockwise  
moves the point backward.  
used for either repeating a previously set loop or  
seamlessly stuttering on the last set cue point.  
(10),(11)  
F.FORWARD/F.BACKWARD  
Press these buttons to perform the scan function during  
pause mode or during play mode.  
(12) LCD  
5
 
NAMES AND FUNCTIONS  
LCD  
(10)PITCH METER  
(1) PLAY / PAUSE INDICATOR  
Shows the percentage change in pitch of the song.  
The meter will display the pitch percentage  
applied by the PITCH SLIDER.  
When the unit is in play mode the “PLAY”  
indicator will glow, when the drive is in pause  
mode the “PAUSE” indicator will glow.  
(11)TIME DISPLAY  
(2) CUE INDICATOR  
This displays the Minutes, Seconds, and  
Frames. The meter will display either the  
elapsed time, or remaining time of a track.  
This indicator will glow when the unit is in CUE  
mode and will flash every time a new CUE  
POINT is set.  
(12)CHARACTER DISPLAY  
(3) FOLDER/TRACK INDICATOR  
This will display the name of the file, artist, and  
title when a disc is loaded.  
This indicator shows you if you are looking at the  
track number or the folder number.  
(13)ELAPSED INDICATOR  
(4) SINGLE INDICATOR  
When the ELAPSED indicator is visible,  
this  
This indicates that the CD drive is in single play  
mode. The track will play once and return to CUE  
mode. If the single indicator is not on, the unit is  
in continuous mode and the drive will play all  
the remaining tracks on the disc until you stop  
play or power is interrupted.  
indicates that the Time Display is showing elapsed  
track time.  
(14)REMAIN INDICATOR  
When the REMAIN indicator is visible, this  
indicates that the Time Display is showing remaining  
track time.  
(5) MP3 INDICATOR  
This will indicate that a Mp3 disc is loaded in the  
(15)TOTAL REMAIN INDICATOR  
drive.  
When TOTAL and REMAIN are visible, this  
indicates that the Time Display is showing total  
remaining disc time.  
(6) TIME BAR INDICATOR  
This bar gives a visual approximation of a track's  
or disc's remaining time. This bar will begin to  
flash when a CD is ending.  
(16)TRACK INDICATOR  
This 3-digit indicator displays the current track. The  
number displayed in the track indicator is a direct  
reference to a track being selected or a track in  
play, pause, or cue mode.  
(7) LOOP INDICATOR  
Appears when the CD is repeating a particular  
area with the music on the CD.  
(17) AUTO CUE  
(8) RELOOP INDICATOR  
This will indicate if the Auto Cue is on or off.  
Press and hold the SGL/CTN for 1 sec. to turn  
the Auto Cue function on and off.  
Appears when the CD has had a loop set  
previously and can go back to loop again.  
(9) PITCH INDICATOR  
Indicator will light up when the Pitch is activated.  
6
 
OPERATIONS  
1. Opening and Closing the Disc Holder  
Turn the unit power on. Press the OPEN/CLOSE button to open the disc holder.  
The disc holder cannot be opened during playback to prevent playback from being interrupted if the OPEN/CLOSE  
button is pressed accidentally. Stop the playback first, then press the OPEN/CLOSE button.  
2. Loading discs  
Hold the disc by the edges and place it in the disc holder, then press the  
OPEN/CLOSE button again to close the disc holder. The unit will show the total  
track number and the total playing time for about 2 seconds then enter the cue  
condition. The cue point will be set to the music starting point of the first track  
automatically.  
CAUTION:  
Do not place any foreign objects in the disc holder, and do not place more than one disc in the disc holder at a time.  
Do not push the disc holder in manually when the power is off, as this may result in malfunction and damages the player.  
3. Selecting Tracks  
Press the TRACK button once to move to next higher or lower track.  
Hold the TRACK button to change tracks continuously at a higher speed.  
When a new track is selected during playback, playback begins as soon as the skip search operation is completed.  
If the TRACK  
button is pressed while at the last track, the first track is selected. In the same way, if the TRACK  
button is pressed while at the first track, the last track is selected.  
4. Starting Playback  
Press the PLAY/PAUSE button during the pause or cue condition to start playback. The PLAY indicator will light.  
The point at which playback starts is automatically stored in the memory as the cue point. The pickup then returns to  
the cue point when the CUE button is pressed. (Back Cue)  
Figure 4-1  
5A. Stopping Playback  
There are two ways to stop playback.  
1. Press the PLAY/PAUSE button during playback to pause at that point.  
2. Press the CUE button during playback to return to the cue point and enter pause condition.(Back Cue)  
CUE  
Figure 5-1  
7
 
OPERATIONS  
5B. Pausing  
˙Press the PLAY/PAUSE button to switch between play and pause.  
˙The play indicator flashes when the pause mode is set.  
˙Figure 5-2 shows the relationship between play and pause.  
2
4
6
3
7
1
5
Figure 5-2  
1)  
2)  
The player has completed the cue or pause operation  
and is waiting for the play start command.  
PLAY/PAUSE button is pressed and player enters play  
mode.  
pause mode.  
5)  
6)  
Pausing.  
Playback resumes when the PLAY/PAUSE button is  
pressed again.  
Playing.  
3)  
4)  
7)  
Playing.  
The PLAY/PAUSE button is pressed and the unit enters  
6. Cueing  
˙ "Cueing" is the process of preparing for playback.  
˙ Press the CUE button, the player will enter cue mode. The playback returns to the cue point and the player enters  
the pause condition. The cue indicator lights up and the play indicator flashes. When the PLAY/PAUSE button is  
pressed, playback starts from the cue point.  
˙ When the track search operation is completed after pressing the SKIP buttons, the player automatically finds the  
position at which the sound starts and cues there(Auto Cue).  
˙ If the CUE button is pressed after the search operation or the scanning operation, playback returns to the cue point  
and enter pause condition.  
˙ Figure 6-1 shows the relationship between the play and back cue operations.  
2
8
2
4
6
8
3
3
7
1
1
5
9
9
Figure 6-1  
1)  
2)  
The player has completed the cue or pause operation  
and is waiting for the play start command.  
When the PLAY/PAUSE button is pressed, playback  
starts and the cue point is stored in the memory.  
Playing.  
pressed again.  
5)  
Pausing.  
6)  
7)  
8)  
The PLAY/PAUSE button is pressed again;  
Playing.  
3)  
4)  
˙
Press the CUE button.  
9)  
The pause mode is set when the PLAY/PAUSE button is  
Cue point setting:  
The pickup returns to the cue point.(Back Cue)  
When play starts from pause by pressing the IN button or by using Scanning or Frame Search, or if you skip to a new  
track by using the skip button, the begin play point will be set to the new cue point.  
When a new cue point is set, the cue indicator lights by flashing for about 1 second.  
NOTE: During cue mode, if the CUE button is pressed and held, playback will start from the cue point. When the button  
is released, the player will return to the cue mode automatically. This allows you to check the cue point.  
7. Jog Wheel - The jog wheel serves two functions depending on the current operating mode:  
The jog wheel will act as a slow frame search control when the unit is in pause or cue mode allowing you to set a  
specific cue point or find a particular starting point.  
The wheel also works as a momentary pitch bend during playback. Turning the wheel clockwise will increase the pitch  
percentage up to +16%, and turning the wheel in the counterclockwise direction will decrease the pitch  
percentage up to -16%. The pitch bend will be determined on how fast you turn the wheel.  
8
 
OPERATIONS  
8. Scanning (Fast forward/Fast backward)  
Scanning is a function for moving quickly forward or backward in the track when the  
The scanning speed depends on how long you hold the button.  
or  
button is pressed.  
Press and hold the  
or  
to begin scanning. The disc moves rapidly forward or backward and the sound is  
played. The current scan point is indicated on the LCD.  
Press and hold the  
to scan in the forward scanning,  
to scan in the reverse scanning.  
9. Time display  
MP3 MODE  
Press TIME button to select time display MP3 mode:  
(1)  
Elapsed time of a track.  
Remaining time of a track.  
(2)  
ELAPSED  
REMAIN  
Figure 9-1  
CD MODE  
Press this button to select the time display .  
It switches between the elapsed time and remaining time and total remaining time of the disc.  
ELAPSED  
TOTAL  
REMAIN  
REMAIN  
Figure 9-2  
10. Matching the Beats Per Minute (BPM)  
There are three tools available for matching the BPM :  
(1)  
Use the pitch slider to adjust the BPM statically.  
(2)  
Use the PITCH BEND buttons to change the BPM temporarily.  
(3)  
Use the JOG WHEEL to change the BPM temporarily.  
1) Pitch Slider  
(1)  
To adjust the BPM by sliding the pitch slider up or down, you must first press the PITCH button to turn on the  
Pitch Slider.  
(2)  
Slide the pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is switchable from +/-  
4%,+/-8% to +/-16%.  
2) Pitch Bending  
The BPM increases or decreases respectively while the PITCH BEND+ or PITCH BEND- button is pressed.  
The BPM increase depends on how long you hold the button. If you hold the button for about 1/2 second, the BPM will  
go either to +16% for PITCH BEND+ or -16% for PITCH BEND-. If you tap the button, the BPM will only change a little  
so you can change the beat slightly without audible changes in the music.  
The CD will return to the tempo indicated by the Pitch slider when you let go of the PITCH BEND + or - button.  
9
 
BEFORE SWITCHING OFF THE POWER  
CAUTION:  
Do not forcibly close the disc holder when the power is off.  
Do not switch off the power when the disc holder is open.  
To avoid damage, please don’t switch the power until the  
disc holder has been closed with the OPEN/CLOSE button  
and the LCD displays "no disc”or "time code” shows.  
COMPACT DISCS  
˙
1. Precautions on handling compact discs  
Do not write on the label (printed side) with a hard-tipped  
implement such as a pencil or ball point pen.  
Condensation will form if a disc is brought into a warm  
area from a colder one, such as outdoors in winter. Do  
not attempt to dry the disc with a hair dryer, etc.  
˙
Do not allow fingerprints, oil or dust to get on the surface  
of the disc.  
˙
If the disc is dirty, wipe it off with a soft dry cloth.  
Do not use benzene, thinner, water, record spray,  
electrostatic-proof chemicals, or silicone-treated cloths to  
clean discs.  
˙
˙
2. Precaution on storage  
˙
After playing a disc, always unload it from the  
player.  
Always handle discs carefully to prevent damaging the  
surface; in particular when removing a disc from its case  
or returning it.  
˙
˙
Always store the disc in the jewel case protect from  
dirt or damage.  
˙
˙
˙
Do not bend the disc.  
Do not place discs in the following areas:  
(1)  
(2)  
(3)  
Do not apply heat.  
Areas exposed to directs sunlight for a considerable time.  
Areas subject to accumulation of dust or high humidity.  
Areas affected by heat from indoor heaters, etc.  
Do not enlarge the hole in the center of the disc.  
SPECIFICATIONS  
GENERAL  
Dimensions:  
482(W) x 88.8(H) x 266(D) mm  
19"(W) x 3 1/2"(H) x 10 1/2"(D)  
5.5 kgs / 12.1 lbs  
Weight:  
Power supply:  
Dual Voltage:  
AC 115/230V, 50/60Hz  
Single Voltage:  
AC 100V, 50/60Hz (For Japan)  
AC 110V, 60Hz (For Taiwan)  
AC 120V, 60Hz (For U.S.A.,Canada,Mexico)  
AC 220V, 50Hz (For United Arab Emirates,Chile,Aegentina)  
AC 220V, 60Hz (For Philippines)  
AC 230V, 50Hz (For Europe,New Zealand,South Africa,Singapore,Israel)  
AC 240V, 50Hz (For Australia,U.K)  
Power consumption:  
20W  
10  
 
WARRANTY & RETURN POLICY  
Warranty  
Through Stantons authorized dealers around the World, Stanton, or one of Stantons authorized distributors outside the U.S., will, without charge, repair  
or replace, at the sole discretion of the entity responsible for making the repair or providing the replacement, any Stanton merchandise proved defective  
in material or workmanship for a period of one (1) year following the date of original purchase. Exceptions to this warranty are as noted below:  
The warranty for mechanical parts which are subject to wear and tear are limited to the earlier of either thirty (30) days following the date of original  
purchase or the following number of cycles: Faders - 15,000; Rotary potentiometers - 10,000; and Switches - 10,000.  
Stanton will warrant all replacement parts and repairs for ninety (90) days from the date of original shipment. Repairs made necessary by reason of mi -  
use, alteration, normal wear, or accident are not covered under this warranty.  
Returns  
Authorized Stanton dealers are only authorized to sell and distribute merchandise within a specific country. All goods requiring warranty repair or replace-  
ment must be returned (freight prepaid if not hand-delivered) to the authorized Stanton dealer from whom the merchandise was purchased and in the  
same country where the merchandise was purchased. For purposes of purchases made via the Internet, the merchandise must be returned to the author-  
ized Stanton dealer in the country where the authorized Stanton dealer which sold the merchandise to purchaser is located and not the authorized Stanton  
dealer in the country where the purchaser is located or the country in which the merchandise was received. Any returns to a non-authorized dealer or to  
an authorized Stanton dealer not in the same country as the merchandise was intended to be sold or as set forth above will void this warranty.  
To initiate a warranty repair, you must contact the authorized Stanton dealer from whom you purchased the merchandise, and follow such authorized  
Stanton dealers return policy.  
Stanton assumes no risk and shall be subject to no liability for damage or loss resulting from the specific use or application made of the merchandise.  
Stantons liability for any claim, whether based on breach of contract, negligence, infringement of any rights of any party, or product liability, and relating  
to the merchandise shall not exceed the price received by Stanton from our purchase of such merchandise. In no event will Stanton be liable for any  
special, incidental or consequential damages (including loss of use, loss of profit and claims of third parties) however caused, whether by the negligence  
of Stanton or otherwise. To the extent permitted by law and except as otherwise provided above, Stanton disclaims any express or implied warranties of  
merchantability or fitness for a particular purpose.  
The above warranty provides you with specific legal rights. You may also have additional rights, which are subject to variation from state to state and  
country to country.  
If there is a dispute regarding the warranty of merchandise that does not fall under the warranty conditions stated above, please include a written expla-  
nation with the merchandise when returned pursuant to the terms and conditions set forth herein.  
Please register your product online at www.stantondj.com.  
 

SMSC Switch USB2512i User Manual
Sony Digital Photo Frame DPF C1000 User Manual
Sony Ericsson Cell Phone CK15a User Manual
Sony Laptop PCG 505G User Manual
Spin Master Motorized Toy Car V Wing Avenger User Manual
Sprint Nextel Cell Phone Q10 User Manual
Star Micronics Network Card TCP400 Series User Manual
State Industries Water Heater SRGSS00107 User Manual
Studer Innotec Battery Charger HPC 2800 12 HPC 4400 24 HPC 6000 48 HPC 8000 48 User Manual
Swann Camera Lens SW P TLBLI User Manual