Tamron Camera Lens AF016C700 User Manual

SP AF 17~50 mm F/2.8  
XR Di-II LD Aspherical [IF]  
(Model A16)  
Thank you for purchasing the Tamron lens as the latest addition to your  
photographic equipment. Di II lens (Digitally Intigrated) series are  
designed for digital SLR cameras with image sensors equivalent to APS-  
C size. Before using you new lens, please read the contents of this  
Owner's Manual thoroughly to familiarize yourself with your lens and  
the proper techniques for creating the highest quality images possible.  
With proper handling and care, your Tamron lens will give you many  
years of photographing beautiful and exciting pictures.  
 
NOMENCLATURE  
1.  
2.  
3.  
4.  
5.  
6.  
7.  
8.  
9.  
Lens Hood  
Hood attaching alignment mark  
Hood attaching indicator  
Filter Ring  
Hood attaching bayonet ring  
Distance index  
Distance scale  
Focusing ring  
Zooming ring  
10. Focal length scale  
11. Zoom index mark  
12. Zoom lock switch (A16) Figs 3 & 4  
13. Lens mount/Lens mount contacts (Nikon)  
14. AF-MF altering switch (Canon Fig 5 & 6)  
15. Lens attachment mark  
16. Bayonet tab on the hood  
17. Bayonet tab on the lens  
SPECIFICATIONS  
A16  
17-50mm  
F/2.8  
Focal Length  
Maximum Aperture  
Angle of View  
Lens Construction  
Minimum Focus Distance  
Filter Size  
78 45'-31 11'  
13/16  
0.27m  
67mm  
Length  
83.2mm  
73.8mm  
430g  
Diameter  
Weight  
Hood  
DA09  
* Lengths and weights listed in lens specifications are for lenses with Nikon mounts.  
* Features and cosmetic designs of lenses listed in this owner's manual may be revised  
without notice.  
 
ATTACHING LENS TO CAMERA  
How to mount the lens  
Removing the rear cap of the lens, align the lens attachment mark on the lens barrel with its  
counterpart on the lens mount of the camera and insert the lens mount into the camera's  
mount opening. Rotate the lens clockwise until it click-locks. For Nikon models, align the  
lens attachment mark with the dot on the camera and rotate the lens counter-clockwise  
until it click-locks.  
How to detach the lens  
Pressing the lens release button of the camera down, turn the lens counter-clockwise (clock-  
wise in case on Nikon), and lift the lens off the camera's lens mount.  
* For further details, please read the instruction manual of your camera.  
FOCUSING (Autofocus) (Ref. Figs. 1 & 2)  
Set the camera on the autofocus mode (AF). Press the shutter button lightly while viewing  
through the camera's viewfinder, the lens focuses automatically. An in-focus mark will light  
when lens focuses on the main subject sharply. Press the shutter button further to photo-  
graph.  
* Also, please read the camera's instruction booklet carefully.  
When set on AF mode, be very careful not to hinder the autofocusing movements of  
the lens. Such interference may cause a serious damage on the lens mechanism.  
Select between the autofocus and manual focus modes by the AF/MF mode selector  
switch on the lens barrel.  
* For further details, please read the instruction manual of your camera.  
FOCUSING (Manual Focus) (Ref. Fig. 2)  
Switch the focusing mode switch of the camera to manual focusing mode (MF) in  
case of Nikon, Minolta, or Pentax camera. In case of Canon, switch to MF on the AF-MF alter-  
ing switch on the lens barrel. Focus manually, rotating the focusing ring while viewing  
through the camera's viewfinder. The main subject image in the viewfinder will be critically  
sharp on the viewfinder screen as lens focuses rightly.  
Press the shutter button lightly while operating the lens for focusing. The focus aid  
mark in the viewfinder will light up when the subject is in critical focus.  
Make sure the subject at infinity appears sharp in the finder when in focus. Because,  
the infinity position on the lens is made with certain allowance to assure right focus under a  
wide variety of photographing conditions.  
* For further details, please read the instruction manual of your camera.  
 
ATTACHING AND REMOVING THE LENS  
How to mount the lens  
Remove the rear cap of the lens. Align the lens attachment mark (15) on the lens barrel with  
its counterpart on the camera mount and insert the lens. Rotate the lens clockwise until it  
click-locks. For Nikon and Pentax models, align the lens attachment mark on the camera and  
the lens attachment mark (15) on the lens to attach the lens. For Nikon models, align the  
lens attachment mark with the dot on the camera and rotate the lens counter-clockwise  
until it click-locks.  
How to detach the lens  
Pressing the lens release button on the camera down, turn the lens counter-clockwise (in  
case of Nikon lens, clockwise), and lift the lens off the camera's lens mount.  
The image circles of Di-II lenses are designed to match the digital SLR cameras using the image sen-  
sors equivalent to APS-C (approx. 15.5 x 23.2mm). Do not use Di-II lenses with cameras using image sensors  
larger than APS-C. Using Di-II lenses with such cameras may cause vignetting on the image.  
Some Canon digital SLR cameras have index marks for attaching both EF lenses (red) and EF-S lens-  
es (white) on the bayonet mount. To attach Tamron Di-II lenses, align the lens attachment mark on the lens  
(15) with the index mark for EF lenses (red). Do not forcibly align the indicator on the kens (15) with the  
index mark for EF-S lens (white). Doing so could result in damage to the lens and/or camera.  
For further details, please read the instruction manual of your camera.  
FOCUSING (Autofocus) (Ref. Figs 1 & 2)  
Switch the focusing mode switch of the camera to Auto focusing mode (AF) in case of  
Nikon, Konica Minolta, or Pentax. In case of Canon camera, switch the AF/MF switch (14) on  
the lens to AF. (Fig. 5). Press the shutter button lightly while viewing through the camera's  
viewfinder, the lens focuses automatically. An in-focus mark will light when the lens focuses  
on the main subject sharply. Press the shutter button further to photograph.  
When set on AF mode, interfering with focusing ring (8) may cause serious damage to the lens  
mechanism.  
For further details, please read the instruction manual of your camera.  
ZOOMING (Ref. Fig. 2)  
Rotate zooming ring (9) of the lens while viewing through the camera's viewfinder and  
compose your image at the chosen focal length.  
 
ZOOM LOCK SWITCH (Ref. Figs. 3 & 4)  
Model A16 is equipped with zoom lock switch mechanism which prevent lens barrel from  
extending towards long focal length, while hanging around the neck. Activate the switch at  
the shortest setting to stop the lens barrels from rotating and extending.  
How to activate the zoom lock switch mechanism  
1. Locking: Set the zoom ring on the lens to the shortest position. Move the zoom lock  
switch (12) toward the camera for locking the zooming ring (9). The lens barrel is locked in  
position when the portion beneath "Lock" is shown in red and the lens barrel does not  
rotate or extend by its own weight.  
2. Releasing: Push the zoom lock switch (12) up. The zooming ring (9) is now released and  
can be rotated.  
Zoom lock switch cannot be activated unless the lens is set to the shortest position. Do not force the  
lock switch or try to rotate the zooming ring while locked; doing so may damage the lens.  
The zoom lock mechanism is made to prevent the lens barrel from extending while carried around  
the neck. When not locked, the zoom lens may change its focal length during a long exposure used in a low  
or high angle position.  
The lens can be used at the shortest setting for picture taking even while in the focused position.  
LENS APERTURE AND AE MODE  
Please follow the instruction manual of your camera.  
LENS HOOD (Ref. Figs. 1, 7, 8, 9)  
A bayonet-type lens hood is provided as standard equipment. We recommend shooting  
with the hood attached whenever possible as the lens hood eliminates stray light which is  
harmful to the picture. However, please be aware of the precautions written below when  
your camera is equipped with a built-in flash.  
Attaching the Lens Hood (Ref. Figs. 7 & 8)  
Align the index mark (2) on the hood with the corresponding index mark (5) or the top of  
the index line of the distance scale, on the lens. Press the hood lightly onto the hood attach-  
ing bayonet ring (Fig. 7, No. 1) and then rotate it clockwise to secure (Fig. 7, No. 2). The lens  
hood will be securely held as the mark "TAMRON O" comes to the top (Fig. 8, No. 3). When  
attaching the lens hood, hold the focusing and zoom control rings so that they are not  
rotated unintentionally.  
Pay particular attention to align the hood attaching indexes when using zoom lenses including  
wide-angle (ex. 35mm or wider) settings. Improper attachment of a hood for wide-angle zoom lens may  
cause large shadowed areas in your pictures.  
 
Stowing lens hood on the lens (Ref. Fig. 9)  
1. Reverse the lens hood. Point the lens toward the opening, then align the hood attach-  
ment mark on the lens with the (TAMRON O) alignment on the hood (3).  
2. Turn the hood clockwise until its alignment mark is at the top to set it. (Fig. 9, 2)  
PRECAUTIONS IN SHOOTING  
The optical design for Di-II takes into consideration the various features of digital sin-  
gle reflex cameras. However, due to the configuration of the digital SLR cameras, even when  
the Autofocus accuracy is within specifications, the focal point may be a little forward or  
behind the optimum point when shooting with auto focus under some conditions.  
The image circles of Di-II lenses are designed to match the digital SLR cameras using  
the image sensors equivalent to APS-C (approx. 15.5 x 23.2mm). Do not use Di-II lenses with  
such cameras may cause vignetting on the image.  
A13 employs an internal focusing (IF) system. Because of the characteristics of this  
optical design, the angles of view at distances other than infinity are wider than that of the  
lenses applying an ordinary focusing system.  
When the built-in flash on the camera is used, adverse photographic phenomena  
such as corner illumination, fall-off, or vignetting at the bottom part of the image may be  
observed, especially with wide angle ranges. This is due to the inherent limitation of the  
coverage of the built-in flash, and/or the relative position of the flash to the edge of the lens  
barrel which causes shadows on the image. It is strongly recommended to use a suitable  
separate flash unit provided by the camera manufacturer for all flash photography.  
When using the lens in the telephoto focal range, please be careful with the camera  
shake. Effective way to avoid the camera shake is using an ISO setting of higher numbers.  
Using a tripod or monopod is also effective.  
When set on AF mode, interfering with the focusing ring may cause serious damage  
to the lens mechanism.  
Certain camera models may indicate the maximum and minimum aperture values of  
the lenses appropriate numbers. This is inherent to the design of the camera and not an  
indication of error.  
When using a special filter such as a PL filter on the A16, use low-profile filters. The  
thick rim of a normal filter may cause vignetting.  
 
TO ENSURE LONG-TERM SATISFACTION  
Avoid touching the glass element surface. Use a photographic lens cloth or a blower  
to remove dust from the lens element surface. When not using the lens, always place a lens  
cap on it for protection.  
Use a lens cleaning tissue or lint cloth with a drop of cleaning solution to remove fin-  
gerprints or dirt on the glass lens surface with a rotary motion from the center to the edges.  
Use a silicon cloth to clean your lens barrel only.  
Mildew is an enemy of your lens. Clean the lens after shooting near water or in any  
humid place. Store your lens in a clean, cool, dry place. When storing your lens in a lens case,  
store it with commercially available drying agents such as silica gel, and change the agent  
occasionally. If you find mildew on your lens, consult an authorized repair shop or nearby  
photographic store.  
Do not touch the lens-camera interface contacts since dust, dirt and/or stains may  
cause a contact failure between the lens and camera.  
When using your equipment in an environment where the temperature changes from  
one extreme to another, make sure to put your equipment temporarily in a case or a plastic  
bag for a length of time in order for the equipment to go though a gradual temperature.  
This will reduce potential equipment trouble.  
 

Sennheiser Microphone MVF 30 User Manual
Shiro Cordless Telephone SD8301 User Manual
Shure Microphone EZB C User Manual
Shure Microphone WL50 User Manual
Sonance Speaker VP65 TL User Manual
SonicWALL Welder 232 002002 00 User Manual
Sony Stereo Receiver STR DA9000ES User Manual
Specialized Home Gym Myka User Manual
StarTechcom Switch SV431H User Manual
Sunfire Stereo Amplifier TGA 7400 User Manual