PLATINUM MINI-SPLIT
UNIT SPECIFIC INSTALLATION GUIDE
The Coolest Thing In Wine Storage
TO BE USED WITH THE
SPLIT SYSTEM OWNERS MANUAL
Required Tools
• Drill
• Phillips Screwdriver • Ladder
• 5/32”Drill Bit
• 1/4”Socket Drill Bit
• 1/4”Wrench
• Tape Measure
• Brazing Torch
• Drywall Saw
• Level
• Pliers
• Pencil
PACKAGE CONTENTS
(1) Mini-Split Evaporator Unit
(1) 12 Foot Bottle Probe
(4) 2”#8 Hex Head Screws
(1) 10 FT. 3/8”Drain Line
(1) ¼”Sight Glass
(1) 10”Piece of Cork Tape
(1) Split System Owner’s Manual
(1) Unit Specific Installation Guide
(1) Evaporator Mounting Template
(1) Warranty Registration Card
(1) ¼”Filter Drier
EVAPORATOR PREPARATION
1. Remove the access panel.
2. Install bottle probe connector.
3. Install 3/8”drain line on drain pan.
4. Depending on your desired installation, remove the rear or bottom knockouts for the line set and drain line.
5. Using a 5/32”drill bit on a drill, from the outside of the unit
cut holes through the unit’s insulation for the line
set and drain line.
1
2
3
Page 1
|
Lexmark All In One Printer X560 User Manual
Oce North America Op1050 User Manual
Panasonic Kx Fp121 User Manual
Ricoh Aficio Mp C2000 User Manual
Samsung Clx 6220 User Manual
Sanyo Upf383562 User Manual
Schumacher Proseries ManualPsw 22 User Manual
Schumacher Sf 1010 2 User Manual
Teledyne Automobile Parts Hfm 300 User Manual
Toshiba Ras B16gkvp E User Manual