Xerox Exp 4110 User Manual

Product

Title

Booklets for DocuSP EXP 4110

Xerox 4110 / 4590 Copier Printer

“How Do I?” guide for Operators

Date

May 2007

Page 1 of 1

EXP4110

How to create a booklet (no covers) printing thru the EXP4110

This setup is when you have multiple 8.5x11 pages in the document & you want to create a booklet on 11x17 (no

covers).

1. Select [File| [Print]

2. Select the [EXP4110 PS printer]

Make sure in the print dialog screen that the [Choose Paper Source by PDF Page Size] is NOT selected.

3. Select [Properties] expand the [Paper Source] Tab

4. Select [Letter SEF] in Page Size

5. Scroll down to [Print Size]

6. Select 11x17

7. Scroll down the Finishing Tab & expand the Tab

8. Scroll down to [Booklet Maker]

9. Select [Saddle]

A conflict window will popup stating that it has to change duplex to top-top & page order to reverse.

10. Select OK

11. Scroll down to [Folding]

12. Select [Booklet Fold & Staple]

13. Select [OK] [OK] to Print

How to Program 5.5 x 8.5 PDF to 8.5 x 11 Booklets - EXP4110

Per EFI, use the Workflow described below to program a 5.5x8.5 (Statement stock) PDF job to print onto 8.5x11

Booklets:

1. Open the PDF

2. Select [File] [Print] [EXP4110 printer]

3. Check the [Choose Paper Source by PDF page size]

4. Select [Properties]

5. Ensure that the [Page Size] = 5.5x8.5 (Statement) SEF

6. Select [Paper Source] and set - [Print Size] = Letter SEF

7. Select [Finishing] and set the following:

a. [Booklet Maker] = Saddle (approve the programming conflict resolutions)

b. Deselect [Booklet Best Fit] ***IMPORTANT***

c. [Folding] = Booklet fold and staple (approve the programming conflict resolution)

8. Select [OK] [OK] to submit the job to print

RESULTS: Job prints with the 5.5x8.5 image correctly placed on each half of the 8.5x11 SEF sheet. It is folded

and stapled into a booklet.