Samsung Cell Phone SGH S425G User Manual

SGH-S425G  
M O B I L E  
P H O N E  
User Manual  
Please read this manual before operating your  
phone, and keep it for future reference.  
Do you have questions about your Samsung Mobile Phone?  
For 24 hour information and assistance, we offer a new FAQ/ARS System  
(Automated Response System) at:  
GH68-36165A  
Printed in China  
Nuance, the Nuance logo, and XT9 are trademarks and/or registered trademarks  
of Nuance communications, Inc., and/or its affiliates in the Unitied States and/or  
other countries.  
microSD™, microSDHC™ and the microSD logo are Trademarks of the SD  
Card Association.  
The Bluetooth® word mark, figure mark (stylized “B Design”), and combination  
mark (Bluetooth word mark and “B Design”) are registered trademarks and are  
wholly owned by the Bluetooth SIG.  
Open Source Software  
Some software components of this product incorporate source code covered under  
GNU General Public License (GPL), GNU Lesser General Public License (LGPL),  
OpenSSL License, BSD License and other open source licenses. To obtain the  
source code covered under the open source licenses, please visit:  
.
Disclaimer of Warranties; Exclusion of Liability  
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE  
WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE PURCHASER TAKES THE  
PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF  
ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT  
LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY  
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE  
PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE WORKMANSHIP OF THE  
PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE  
PRODUCT WITH THE REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR  
CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION  
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY  
OF ANY KIND WHATSOEVER WITH RESPECT TO THE PRODUCT. IN ADDITION,  
SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING  
FROM THE PURCHASE OR USE OF THE PRODUCT OR ARISING FROM THE BREACH  
OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR  
CONSEQUENTIAL DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.  
SAMSUNG IS NOT LIABLE FOR PERFORMANCE ISSUES OR INCOMPATIBILITIES  
CAUSED BY YOUR EDITING OF REGISTRY SETTINGS, OR YOUR MODIFICATION OF  
OPERATING SYSTEM SOFTWARE.  
USING CUSTOM OPERATING SYSTEM SOFTWARE MAY CAUSE YOUR DEVICE AND  
APPLICATIONS TO WORK IMPROPERLY.  
S425G_UDLB5_MM_030612_F4  
3-Way Calling (Multi-Party Calling) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32  
Section 4: Entering Text ......................................................33  
Using the QWERTY Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33  
Changing the Text Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35  
1
Navigating the Browser . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61  
Favorites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Enter URL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
Clear Cache . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62  
2
Using the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117  
Camera Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118  
Using the Camcorder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122  
Camcorder Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123  
3
Operating Environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146  
Restricting Children's Access to Your Mobile Device . . . . . . . . . . . . . . . . . . 149  
FCC Notice and Cautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149  
Other Important Safety Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150  
4
Section 1: Getting Started  
This section explains how to start using your phone by configuring your hardware  
and setting up your voice mail.  
Understanding this User Manual  
The sections of this manual generally follow the features of your phone.  
Before using your phone, see “Health and Safety Information” on page 125.  
Special Text  
This manual includes notes, tips and warnings, in special text that is set apart to  
point out important information, share quick methods for activating features, and to  
define terms.  
The definitions for these methods are as follows:  
Notes: Presents options for the current feature or menu.  
Tips: Provides quick methods or useful shortcuts.  
Important: Points out important information about the current feature that could affect  
performance.  
Warning: Brings to your attention important information to prevent loss of data or  
functionality, or even prevent damage to your phone.  
Text Conventions  
This manual provides condensed information about how to use your phone. The  
following text conventions are used to represent often-used steps:  
Arrows are used to represent successive menu selections.  
For example: From the Home screen, press Menu Settings ➔  
Phone Language.  
Getting Started  
5
   
Installing the Battery  
Removing the Battery Cover  
1. Remove the battery cover by placing your thumbnail in the slot at the bottom  
of the phone. If you have fragile nails, use a pointed object.  
2. Lift the cover up and off the phone.  
Installing the Battery  
1. Align the gold contacts of the battery with the contacts in the battery  
compartment in the phone.  
2. Press the battery down until it clicks into place. Make sure that the battery is  
properly installed before switching on the phone.  
6
 
3. Replace the battery cover onto the back of the phone in the direction shown  
by the arrow.  
4. Press down along the bottom of the phone until you hear a light click.  
5. Press down firmly along the edges to ensure that the cover is flush with  
the phone.  
Note: Make sure the battery is properly installed before switching on the phone.  
Getting Started  
7
Charging a Battery  
Your phone is powered by a rechargeable Li-ion battery. The Travel Adapter that  
is used to charge the battery, is included with your phone. Use only Samsung-  
approved batteries and chargers.  
You can use the phone while the battery is charging, although doing so requires  
additional charging time.  
Note: You must fully charge the battery before using your phone for the first time. A discharged  
battery recharges fully in approximately 4 hours.  
Note: Long backlight settings, searching for service, vibrate mode, browser use, and other  
variables may reduce the battery’s talk and standby times.  
Using the Travel Adapter  
With the battery installed, remove the plastic cover of the Power/Accessory  
Interface connector on the upper right side of phone.  
Incorrect  
Correct  
8
 
Important!: Verify that the handset battery is installed prior to connection. If the battery is not  
properly installed and the wall charger is connected, the handset may power off and  
on continuously, preventing proper operation.  
6. Plug the data cable into the base piece provided and into the Power/  
Accessory Interface connector on your phone.  
7. Plug the base piece into a standard AC wall outlet.  
8. When the battery is fully charged, the phone displays a message telling you  
the battery is full. Remove the connector from the phone.  
Note: Failure to unplug the wall charger before you remove the battery, can cause damage to the  
phone.  
Warning!: If your device has a touch screen display, please note that a touch-screen responds best  
to a light touch from the pad of your finger or a non-metallic stylus. Using excessive  
force or a metallic object when pressing on the touch screen may damage the tempered  
glass surface and void the warranty.  
Low Battery Indicator  
When the battery is weak and only a few minutes of talk time remain, the battery  
icon (  
) blinks and the device sounds a warning tone at regular intervals. In this  
condition, your phone conserves its remaining battery power by reducing the  
backlight’s brightness and entering a dimming mode. For a quick check of your  
battery level, glance at the battery charge indicator located in the upper-right corner  
of your device’s display. Five bars (  
) indicate a full charge.  
When the battery level becomes too low, the phone automatically turns off.  
Getting Started  
9
Switching the Phone On or Off  
1. To turn the phone on, press and hold  
or  
until the phone switches on.  
The phone launches the activation splash screen and searches for the  
network. Once the network has been found, you can make or receive calls.  
2. To turn the phone off, press and hold  
until the phone switches off.  
Note: The display language is preset to English at the factory. To change the language, press  
Menu Settings Phone Language  
.
Installing the Memory Card  
Your phone supports the use of a memory card (microSD) for data storage of such  
things as data, music, pictures, and video files. This type of memory card is  
designed for use with this mobile phone and other devices.  
1. Push the microSD card into the slot until it clicks.  
Make sure the microSD gold contact pins face downward and the card is securely  
inserted.  
Incorrect  
Correct  
10  
   
Locking and Unlocking the Screen  
1. To lock the phone screen, press and hold  
.
2. To unlock the phone screen, press the Unlock soft key and then press the OK  
soft key.  
Note: The Auto Key Lock feature automatically locks the screen when the screen times out. To  
change the default setting, press Menu  
Settings  
Phone  
Auto Key Lock.  
Setting Up Your Voice Mail  
1. In Idle mode, press and hold  
a password.  
. You may be prompted to enter  
2. Follow the tutorial to create a password, record a greeting, and record  
your name.  
Note: These steps may be different depending on your network.  
Accessing Your Voice Mail  
1. In Idle mode, press and hold  
.
2. When connected, follow the voice prompts from the voice mail center.  
Accessing Your Voice Mail From Another Phone  
1. Dial your wireless phone number.  
2. When you hear your voicemail greeting, press the asterisk key (*).  
3. Enter your passcode using the keypad.  
Getting Started  
11  
   
Section 2: Understanding Your Phone  
This section outlines some key features of your phone. It also displays the screen  
and the icons that display when the phone is in use.  
Features  
Your phone is lightweight, easy-to-use and offers many significant features. The  
following list outlines a few of the features included in your phone.  
2.0 Megapixal Camera with 4x Digital Zoom  
Camcorder  
®
Bluetooth Wireless Technology  
User friendly, menu driven access to features and options  
Display and keypad in portrait or landscape mode  
Sound/Image media capability  
microSD card compatibility for use in data storage and access.  
Games & Apps feature to shop, buy, and store games and apps.  
Tools feature provides Camera, Record Audio, Alarms, Calendar, Tasks, Memo, Calculator,  
Tip Calculator, Eco Calculator, Converter, World Clock, Timer, and Stopwatch.  
12  
   
Front View  
The following illustrations show the main elements of your phone.  
14  
1
13  
12  
2  
11  
3
10  
4
9
5
6
7
8
1. Display: Shows information needed to operate your phone: signal strength,  
battery level, time and date, and more.  
2. Left Soft key: Press to select the option displayed above the Left Soft Key.  
3. Send key: Press to make or answer a call. In Idle mode, press and hold to  
recall the last number dialed or received.  
4. Go to key: allows you to access applications from the idle screen without  
navigating through the main menu icons and sub menus.  
Understanding Your Phone  
13  
 
5. Voice mail key: Press and hold for two seconds to automatically dial your  
voice mail phone number.  
6. Alphanumeric keys: Enter numbers, letters, and special characters.  
7. Special Function keys: In Idle mode, press and hold the * key to lock  
keypad. In Idle mode, press and hold the # key to turn on Vibration Mode.  
8.  
: Allows callers to hear you when you are speaking. Used in  
Microphone  
making voice note recordings.  
9. Cancel/Clear key: Deletes characters from the display. In Menu mode,  
returns to the previous menu level. In Idle mode, press to display the  
Calendar in Month view.  
10. Power On/Off (Exit) key: Press to end a call. Press and hold for two seconds  
to turn phone on or off. While in the Menu mode, returns phone to Idle mode,  
then cancels input.  
11. Right Soft key: Press to select the option displayed on the screen above the  
Right Soft Key.  
12. OK (Select) key: Press to accept the displayed option when navigating  
through a menu. In Idle mode, press to display the Prepaid screen.  
13. Navigation key: In menu mode, press to scroll through the menu options. In  
Idle mode, press to access shortcuts:  
• Up key: Press to access the Create message screen to compose a new message.  
• Down key: Press to access Contacts.  
• Left key: Press to access Messages menu.  
• Right key: Press to access Sound Profile.  
14. Earpiece: Use during calls to listen to callers.  
14  
Qwerty View  
Sliding the phone open in Landscape Mode provides access to a QWERTY keypad.  
9
8
1
7
2
3
4
5
6
1. Left Soft key: allows you to select soft key actions or menu items  
corresponding to the bottom left line on the display screen.  
2. Function key: allows you to enter numbers using the numeric keys after  
pressing this key.  
3. Go to key: allows you to access applications from the idle screen without  
navigating through the main menu icons and sub menus.  
4. Numeric keys: allows you to enter numbers when you press the FN key first.  
5. Navigation keys: allow you to scroll through phone menu options and provide  
shortcuts to phone functions from standby mode.  
6. OK/Confirm key: when navigating through a menu accepts the highlighted  
choice in the menu. In Idle mode, press to display the Prepaid screen.  
Understanding Your Phone  
15  
 
7. Right Soft key: allows you to select soft key actions or menu items  
corresponding to the bottom right line on the display screen.  
8. Enter key: allows you to start a new line when typing a message.  
9. Back key: allows you to return to the previous menu. In text mode, deletes  
the last character entered. Allows you to return to the previous page in the  
Browser. In Idle mode, press to display the Calendar in Month view.  
16  
Side Views  
The following illustration shows the side details of your phone.  
5
1
4
2
3
1.  
: From the Home screen, press to adjust volume. During calls or  
Volume keys  
music playback, press to adjust volume. Press to mute the ringtone of an  
incoming call. Press and hold to send an incoming call directly to voicemail.  
2. Memory card port: Allows you to install a microSD or microSDHC card.  
3. Camera key: Allows you to take pictures when you are in camera mode.  
Launches the camera with a press.  
4. Multitasking key: opens the application switch window that allows you to  
select from a group of applications without having to exit from the currently  
active application. These options include Call, Messages, Browser, Music  
Player, Games, and End all.  
Understanding Your Phone  
17  
 
5. Power/Accessory Interface connector: Allows you to connect a power  
cable or optional accessories, such as a USB/data cable or a hands-free  
headset.  
Back View  
The following illustration shows the back view of the phone with the camera lens.  
1
2
1. External Speaker: Allows you to hear music.  
2. Camera Lens: Used to take pictures and shoot videos.  
18  
 
Display Layout  
Your display screen provides information about the phone’s status, alerts for calls  
and messages, time and date, options and soft keys for navigating your phone  
menus.  
The icons on your phone display are described as follows:  
Showsthereceived signalstrength.The greater the number ofbars, the  
stronger the signal.  
Shows the level of your battery. The more bars you see, the more power  
remains.  
Displays when a call is in progress.  
Displays when the phone is not receiving a signal.  
Displays when the phone is in Airplane mode.  
Displays when Bluetooth wireless technology is active.  
Displays when Silent Mode is active.  
Displays in the View Tab when you miss a call.  
Displays in the View Tab when you receive a new text message or a  
picture message.  
Displays in the View Tab when you receive a new voice mail.  
Displays when you set an alarm to ring at a specified time.  
Understanding Your Phone  
19  
 
Backlight  
A backlight illuminates the internal display and the keypad. When you press any  
key, the backlight comes on. It goes off when no keys are pressed within a given  
period of time, depending on the setting in the Backlight Time menu. The display  
turns off after one minute to conserve battery power.  
The On setting determines how long the keypad backlight remains on. The Dim  
setting determines how long after the keypad backlight goes off that the display  
backlight remains lit.  
To access the Backlight menu:  
1. In Idle mode, press Menu Settings Display Light Settings ➔  
Backlight Time and press the Select soft key or  
.
2. Highlight the On option and press Edit. Use the Up or Down Navigation key to  
select the time the keypad backlight is on. You can choose: 10 Seconds, 30  
Seconds, 1 Minute, 3 Minutes or 10 Minutes. Press  
.
3. Press the Down key to highlight the Dim option and press Edit. Use the Up or  
Down Navigation key to select the time the display backlight remains on after  
the keypad backlight times out. You can choose: Off, 5 Seconds,  
30 Seconds, 1 Minutes or 3 Minutes. Press  
.
4. Press Save to retain your settings.  
20  
 
Menu Navigation  
This section explains the menu navigation for your phone. Menus and sub-menus  
can be accessed by scrolling using the Navigation keys or by using the shortcut  
keys.  
Accessing a Menu  
1. In Idle mode, press the Menu soft key and scroll using the Navigation keys to  
reach a main menu item. Press the Select soft key or the  
key to enter  
the menu.  
2. If the menu contains sub-menus, you can access them by first highlighting  
the option and then by pressing the Select soft key or the  
key. If the  
menu you selected contains further options, repeat this step.  
3. To scroll through these menus, press the Up or Down Navigation key or the  
Volume key (located on the left side of your phone). Press the Select soft key  
or the  
4. To return to the previous menu level, press the Back soft key or the  
5. To exit the menu without changing the settings, press the key.  
key to make your selection.  
key.  
Understanding Your Phone  
21  
 
Using Shortcut Numbers  
Numbered menu items, such as menus, sub-menus, and options can be quickly  
accessed by using their shortcut numbers.  
In Menu mode, Main Menus can be accessed by pressing the number keys (1 to 0, *  
and #) corresponding to their location on the screen.  
Example: Access your message inbox.  
1. In Idle mode, press the Menu soft key.  
2. Press the  
key to access Messages.  
3. Press the  
key to access Inbox.  
22  
Go to Menu  
Go to menu allows you to access applications from the idle screen without  
navigating through the main menu icons and sub menus. There are twelve available  
shortcuts, nine preassigned (Email, Inbox, Create Message, Games&Apps, Music,  
Bluetooth, Alarms, Recent Calls, and Airplane Mode), and three empty shortcuts you  
can assign (10, 11, and 12).  
Note: To enter 10 for My Menu, enter a 0. To enter 11, enter an asterisk (*). To enter 12, enter the  
pound sign (#).  
To navigate Go to menu:  
1. In Idle mode, press the Go to key (  
), and highlight a shortcut.  
2. Press the  
key to access the selected option.  
– or –  
Press the Options soft key. The following options are available, depending on  
whether or not the selected shortcut has been assigned:  
Options for assigned shortcuts:  
• Open: open the selected shortcut and displays the submenus, launches the selected  
application, or displays a screen.  
• Change: changes the currently selected shortcut and assigns another shortcut to this  
field.  
• Remove: removes the selected shortcut from this field.  
• Remove all: removes all the shortcuts from the fields in this menu.  
Options for unassigned shortcuts:  
• Define: allows you to choose from a list of applications to assign to the shortcut key.  
• Remove all: removes all the shortcuts from the fields in this menu.  
Understanding Your Phone  
23  
 
Section 3: Call Functions  
This section describes how to make or answer a call.  
Note: Keys shown in this section represent keys shown on the front of the phone. If you have the  
phone open in landscape mode, then press the corresponding key.  
Displaying Your Phone Number  
Press Menu  
Making a Call  
From the Idle screen, use the keypad to enter the number you wish to call and  
press  
Settings  
Phone  
Own number.  
.
Note: When you activate the Auto Redial option in the Voice Call menu  
(
Menu  
Settings  
Calls  
Voice Call  
Auto Redial) the phone automatically  
redials when the person does not answer the call or is on the phone.  
Making an International Call  
1. From the Idle screen, press and hold  
. The + character displays.  
2. Use the keypad to enter the country code, area code, and phone number.  
If you make a mistake, press  
until the desired numbers are deleted.  
3. Press  
.
24  
     
Manual Pause Dialing  
To manually call a number with pause(s) without storing it in your Contacts list:  
1. From the Idle screen, use the keypad to enter the phone number.  
2. Press and hold  
the additional numbers.  
3. Press to make your call.  
to add a two-second pause (P). Use the keypad to enter  
Tip: You can create pauses longer than two seconds by entering multiple two-second pauses.  
Correcting an Entered Number  
Use the following steps to correct a character entered incorrectly.  
1. After entering a number using the keypad:  
If you make a mistake, press  
Press and hold to erase the entire string of numbers.  
to return to the Idle screen.  
to erase a single character.  
2. Press  
Ending a Call  
Press the  
key.  
Using the Volume Keys  
During a call, use the Volume keys on the left side of the phone to increase or  
decrease the earpiece volume.  
In Idle mode, use the Volume keys to adjust the ringer volume.  
Press one of the volume keys to immediately silence the tone of an incoming call or  
alarm.  
Call Functions  
25  
Making a Call Using Speed Dial  
You can assign a shortcut number to a phone number for speed dialing.  
1. Press Menu  
showing the numbers 1 through 9. The number 1 is reserved for Voice Mail.  
2. Highlight an unused number and press Options Assign  
3. Select Address Book or FDN Contacts  
4. Highlight a contact to assign to the number and press Select or the  
Contacts  
Speed Dial List. The Speed Dial screen displays  
.
.
key.  
5. To make a call using the Speed Dial feature from the Idle screen, press and  
hold the speed dial number. The phone number assigned will automatically  
be called.  
Answering a Call  
When a call is received, the phone rings and displays the caller phone number or  
name, if stored in Contacts.  
1. From the Incoming call screen, press  
If the Any Key option is activated (Menu  
Call Answer), you can press any key to answer a call except  
2. Press to end the call.  
or Accept  
.
Settings Calls  
General  
.
Note: You can answer a call while using Contacts or other menu feature. After ending the call, the  
phone returns to the previously active screen.  
26  
 
Placing a Call on Hold  
While on a call, you can place the call on hold to answer an incoming call or place a  
new call, if your network supports this service. You can place the current call on  
hold.  
To place a call on hold:  
1. While on a call, press Options  
2. Press Resume to continue the conversation.  
3. Press Options End Call to disconnect.  
To make a new call while you have a call in progress:  
1. While on a call, press Options Hold  
2. Dial the new phone number or look it up in Contacts.  
Hold.  
.
3. Press  
to dial the second number.  
– or –  
Press Options  
New call to dial the second number.  
4. Press  
to end the current call.  
– or –  
Press Options  
End and select Active call, Held call, or All calls.  
Press Select or  
.
When you have an active call and a call on hold, you may switch between the  
two calls.  
Call Functions  
27  
To switch between two calls:  
1. Press Options Swap  
to end the current call.  
.
2. Press  
– or –  
Press Options  
End and then select Active call, Held call, or All calls and  
press Select or  
.
In-Call Options  
While on a call, you can press the Mute soft key to mute the microphone, or press  
Spkr on to put the call on speakerphone, and press the Options soft key to access  
the following options:  
Hold: places the current call on hold.  
Contacts: allows you to access your Address Book information.  
Save to Contacts/View Contact Details: allows you to save the caller to your contacts, or, if  
the caller is already listed in your contacts, to view the caller’s Address Book information.  
New call: places the current call on hold and then allows you to enter and call  
another number.  
Send Message: allows you to create and send a new Text or Multimedia Message.  
More  
:
Calendar: Allows you to temporarily access your calendar while still maintaining the  
active call.  
Memo: Allows you to access Notes.  
Send DTMF: Sends DTMF (Dual Tone Multi-Frequency) tones to the contacts you have  
selected. These DTMF tones are sent as a group. The DTMF tones are the tones used in  
phones for tone dialling, sounding when you press the number keys. This option is helpful for  
entering a password or an account number when you call an automated system, like a  
banking service.  
End call: Allows you to end the active call.  
28  
Using the Speakerphone During an Active Call  
While in an active call, it is possible to enable the speakerphone feature.  
1. Dial the number and press  
.
2. Press to activate the speakerphone.  
3. Press the Volume keys (located on the left side of your phone) to adjust the  
volume.  
Switching off the Microphone (Mute)  
You can temporarily switch your phone microphone off, so that the other person  
cannot hear you.  
To switch the microphone off temporarily during a call:  
1. Press Mute. The option is replaced with Unmute.  
2. Press Unmute to deactivate the Mute function and reactivate the microphone.  
Recent Calls  
The phone stores the numbers of the calls you’ve dialed, received, or missed in the  
Recent Calls menu.  
1. From the Idle Screen, press  
2. Press the Left or Right Navigation key to display All calls  
Made, or Calls Received  
3. Press to dial a highlighted number.  
.
,
Missed calls, Calls  
.
Call Functions  
29  
 
Viewing All Calls  
1. From the Idle Screen, press  
to view All Calls in the Recent Calls.  
2. Scroll through the list of All Calls. As a call highlights, the details display.  
Press to dial the number of the call you are viewing.  
3. Highlight a call and press the Options soft key to view the following options:  
• Details: allows you to view the caller’s name, phone number, time and date called as well  
as the length of the call.  
• Call: allows you to automatically dial the selected number.  
• Save to Contacts: allows you to save the number to your Address Book on either the  
phone or SIM card. This option only displays if the number is not already in your Address  
Book.  
• Send Message: allows you to sent a text or Multimedia message to the caller.  
• Delete: allows you to delete a selected call or all calls.  
• View contact details: allows you to view the contact’s Address Book information. This  
option only appears if the contact is in your address book.  
Viewing Missed Calls  
1. From the Idle Screen, briefly press  
and use the Right navigation key to  
scroll to the Missed calls screen. The recently missed calls display.  
2. Scroll through the list of missed calls. As the call highlights, the details  
display. Press  
to dial the number of the call you are viewing.  
3. To move to another call type, press the Left or Right Navigation key to make  
your selection.  
30  
Saving a Missed Call to your Address Book  
1. From the Idle Screen, briefly press  
and use the Right navigation key to  
scroll to the Missed calls screen.  
2. Highlight the desired missed call.  
3. Press Options  
Save to Contacts.  
Sending a Message to a Missed Call  
1. From the Idle Screen, briefly press  
scroll to the Missed calls screen.  
and use the Right navigation key to  
2. Highlight the desired missed call.  
3. Press Options  
Send Message.  
4. From the Create Message screen, highlight the empty text field and use the  
keypad to type a message.  
Deleting a Missed Call  
1. From the Idle Screen, briefly press  
and use the Right navigation key to  
scroll to the Missed calls screen.  
2. Highlight the desired missed call.  
3. Press Options Delete and press the Right navigation key to choose  
Selected or All  
4. At the Delete? prompt, press Yes to delete or No to cancel.  
.
Call Functions  
31  
Call Waiting  
The Call Waiting feature allows you to answer an incoming call while you have a call  
in progress, if this service is supported by the network. You must activate Call  
Waiting in the settings menu.  
1. Press Menu Settings Call  
s
Voice Call  
Call Waiting.  
2. Select Activated. You are notified of an incoming call by a call waiting tone.  
To answer a call with Call Waiting activated, while you have a call in progress:  
1. Press  
to answer the next incoming call. The first call is automatically  
placed on hold.  
2. To switch between the two calls, press Options Swap.  
Swap places the current call on hold and then activates the previous call.  
3-Way Calling (Multi-Party Calling)  
The 3-Way or Multi-Party feature allows you to answer a series of incoming calls  
and place them on hold.  
If this service is supported by the network, and the SIM has the feature enabled,  
all calls can be joined together. You are notified of an incoming call by a call  
waiting tone. To activate the call waiting feature, see “Call Waiting” on page 32.  
1. Press  
to answer the first incoming call.  
2. Press  
to answer the next incoming call. The first call is automatically  
put on hold.  
3. Press  
call on hold, in a single multi-party call.  
4. Press to end a call.  
to join with both of your callers, the active call and the  
32  
   
Section 4: Entering Text  
This section outlines how to select the desired text entry mode when entering  
characters using the QWERTY keyboard-style keypad.  
This section also describes how to use the T9 predictive text entry system to reduce  
the number of key strokes needed to enter text.  
Using the QWERTY Keypad  
Your phone has a QWERTY (  
) keypad to support  
easy and quick text input. You can enter text as you would when using a computer’s  
keyboard. To access the QWERTY keypad, slide your phone open in the landscape  
position to expose the keypad.  
Navigation  
Keys  
Left Soft  
Right Soft  
Key  
Key  
OK/Confirm  
The keys are labelled with the alphabet on the lower half and numbers and symbols  
on the upper half. Press the key corresponding to the character you want to enter.  
To switch between using the upper case characters and lower case characters,  
press  
. You can move the cursor by moving the Navigation key.  
Entering Text  
33  
     
In addition, you can use the following function keys:  
Press to delete characters. Press and hold to  
delete all text.  
Press to start a new line.  
Press twice to select CAP LOCK.  
Press once more to remove CAP LOCK.  
Press twice to select Function lock.  
Press once more to remove Function lock.  
Short press inserts a space.  
Double press inserts a period and a space.  
Press and hold in Idle mode to set phone to Silent  
mode.  
Press to display the symbols grid.  
34  
Changing the Text Input Mode  
The available Text Input modes are: T9 Predictive Text, Fn (123 numeric), Abc, and  
Symbols (Sym)  
.
Refer to the Text Input mode in the upper right corner of the screen to identify the  
mode.  
T9 Predictive Text: allows your keystrokes to be interpreted, according to a built-in  
dictionary in the phone, to determine the likely word.  
Abc: activates the default alphabet keys.  
Fn (123): activates the number keys.  
Sym: displays the symbols table.  
Using Abc Mode  
To change the Text Input mode, follow these steps:  
1. In Landscape mode, press  
once, twice, or three times to change the  
text input mode to Abc, ABC, or abc. Your phone default is Abc mode.  
text input mode to Abc, ABC, 123, or abc.  
3. Enter the desired text. For more information on sending messages, see  
“Creating and Sending Messages” on page 39.  
Using Fn (numeric) Mode  
1. In Landscape mode, press the  
key once and press a number key to  
enter just one number.  
Press the  
key twice to set the function lock and press as many number  
key a third time to remove the function lock and display Abc  
keys as required.  
Press the  
mode.  
Entering Text  
35  
 
2. In Portrait mode, press  
until 123 appears in the upper right corner of  
3. Continue until you are finished composing your message.  
For more information on sending messages, see “Creating and Sending  
Messages” on page 39.  
Using SYM (symbol) Mode  
Symbol mode enables you to insert symbols and punctuation marks into text.  
1. In Landscape mode, press the  
key to display a matrix of symbols. Use  
the arrow keys to display more tables.  
2. Select the number of the corresponding symbol and press the OK soft key to  
insert the symbol into the text message.  
3. In Portrait mode, press Options  
Text Mode  
Symbols.  
– or –  
Press and hold the  
key.  
4. Press the number key that corresponds to the symbol you want to enter in  
your message.  
5. Continue until you are finished composing your message.  
Using T9 Predictive Text in Portrait Mode  
The T9 Predictive Text input method is based on a built-in dictionary. A series of  
keystrokes is interpreted by the phone using this dictionary to determine the likely  
word.  
1. In Portrait mode, press Options  
Text Mode  
T9 Predictive Text.  
36  
2. Begin entering a word by pressing the 2 to 9 keys. Press each key only once  
for each letter. The built-in dictionary lists words that match the entered  
keystrokes.  
3. Example: To enter “Hello”, press  
,
,
,
,
The word that you are typing displays on the screen. The word changes as  
you press additional keys.  
4. Enter the whole word before editing or deleting the keystrokes.  
5. When the word displays correctly, go to step 6.  
If the word doesn’t display correctly, press the  
alternative word choices.  
key to display  
Example: Both “Of” and “Me” use the  
and  
keys. The phone displays the most  
commonly used choice first.  
6. Insert a space by pressing the  
key and start entering the next word.  
Add a New Word into the T9 Dictionary  
1. After pressing the keys corresponding to the word you want to add, press the  
key to display the alternative words.  
2. When the last alternative word displays, Spell displays. Press the Spell soft  
key.  
3. Enter the word you want to add using the ABC mode.  
4. Press the Add soft key or the  
key.  
Entering Text  
37  
The word is added to the T9 dictionary and becomes the first word for the  
associated keypress series.  
Note: This feature may not be available for some languages.  
To enter periods, hyphens, colons, or parenthesis, press and hold the  
T9 mode applies grammar rules to ensure that correct punctuation is used.  
key.  
To shift case in T9 mode, short press the  
Capital lock, Lower case, and Numeric.  
key to toggle between, Initial capital,  
You can move the cursor by using the Left and Right Navigation keys. To delete letters,  
press the key. Press and hold the key to clear the display.  
38  
Section 5: Messages  
This section describes how to send or receive different types of messages. It also  
includes the features and functionality associated with messaging.  
Types of Messages  
Your phone provides the following message types:  
Text Messages  
Picture Messages  
Email  
Voicemail  
The Short Message Service (SMS) lets you send and receive text messages to and  
from other mobile phones or email addresses. To use this feature, you may need to  
subscribe to your service provider’s message service.  
The Multimedia Messaging Service (MMS) lets you send and receive multimedia  
messages (such as picture messages and video messages) to and from other  
mobile phones or email addresses. To use this feature, you may need to subscribe  
to your service provider’s multimedia message service.  
Important!: When creating a message, adding an image, a sound file, or a video clip to a text  
message changes the message from a text message to a multimedia message.  
Creating and Sending Messages  
1. From the Idle screen, press Menu  
Messages  
Create Message.  
Tip: In Idle mode, you can create a new message by pressing up on the Navigation key.  
2. Use the QWERTY keypad to enter a message.  
3. Press Insert to insert one of the following into your message:  
• Picture: inserts a picture from the Pictures folder.  
Messages  
39  
       
• Video: inserts a video from the Videos folder.  
• Sound: allows you to choose an existing audio file from the Audio folder.  
Templates: allows you to insert pre-written sentences, such as “Call me when you get  
this message”.  
• Emoticon: allows you to add emoticons, such as a happy face to your message.  
Take Picture: allows you to temporarily exit the message, take a photo with phone’s  
camera, and then add it to your message by pressing Add  
.
• Record Video: allows you to temporarily exit the message, record a video clip using the  
phone’s camera, and then add it to your message by pressing Add  
.
• Record Sound: allows you to temporarily exit the message and record an audio clip using  
the phone’s microphone. Press Options for the following operations:  
Play: to listen to your audio clip.  
Record: to add to your recording.  
Add to Message: to add your audio clip to your message.  
Delete: to delete the audio clip.  
More: to choose from the following options: Rename the audio clip, Lock/Unlock, allow  
Bluetooth Visibility, or view Properties  
.
• Favorites URL: allows you to attach a web URL from your Favorites list.  
• Contact Info: allows you to tap on an existing Address Book entry, then add it to your  
message by pressing Select  
.
4. Review your message and press Send to  
.
5. Enter a phone number or email address in the Recipients field.  
– or –  
Press Options  
Add Recipients and select one of the following:  
• Recent Contacts: to select a recipient from your Recent Calls list.  
• Contacts: to select a recipient from your Contacts list (valid entries must have a wireless  
phone number or email address).  
• Groups: to select a recipient from the Group list.  
40  
Attaching Business Card to a Message  
To attach your Business Card to an outgoing message, follow these steps:  
1. Create a contract entry (the information stored in the entry is used as a  
business card).  
2. Press Menu  
3. Highlight the contact (the business card) in which you are sending and press  
the key.  
4. Press Options  
Contacts  
Contacts.  
Send business card via and press the Right Navigation key.  
5. Select Message and press the  
6. Enter your message.  
key.  
7. Press Send to, then add recipient(s).  
8. Press Send again.  
Viewing New Received Messages  
1. In Idle mode, new messages are indicated by icons and a New Message pop-  
up.  
2. Press the View button from the New Message pop-up.  
Note: If you accidentally exit from this notification screen, navigate to Menu  
Messages  
Inbox  
to access your messages.  
3. Your message displays on the screen.  
Messages  
41  
   
Using Message Options  
Message options at the Inbox level differ according to the message type, what you  
have done with the message, and whether you are viewing the message.  
1. From the Idle screen, press Menu  
Messages  
Inbox.  
2. While viewing the list of messages highlight a message and press the Options  
soft key to access the following:  
• Reply: allows you to reply to the message via Text message.  
• Call: allows you to dial the originating message number.  
• Delete: allows you to delete Selected or Multiple messages.  
• Forward: allows you to forward the message.  
• Save to Contacts: allows you to save the recipient or sender’s information from the  
message to your Address Book on either the Phone or SIM.  
• More: provides the following options:  
Move to Phone/Move to SIM Card: If a message is stored in the SIM card, it is saved to the  
phone’s memory. If a message is stored in the phone’s memory, it is then saved to the SIM card.  
Lock/Unlock: allows you to lock or unlock the highlighted message.  
Sort by: allows you to sort the messages in your Inbox by Read/Unread, Recipient, Type,  
Subject, and size.  
Note: When storing a Contacts entry to the SIM card, only the Name, Number, Group, and Slot  
location display initially. To save additional information for a particular contact, such as other  
phone numbers, or e-mail, it is important to add new fields to that Contact information. If you  
move the SIM card to another phone that does not support additional fields on the SIM card,  
the additional information is not available.  
42  
 
Deleting Messages  
When your phone’s memory is full, an notification message displays and you cannot  
receive any new messages. Use the Delete option to erase obsolete messages,  
freeing memory for new messages. You can delete the messages either individually  
or all at one time.  
1. Press Menu  
Messages  
Inbox.  
All messages are stored in the Inbox.  
2. Select a message to delete and press the  
key.  
3. With the message displayed, press Options  
Delete and press Select  
or the  
Messages Settings  
To configure the settings for text messages and multimedia messages:  
Press Menu Messages Messages Settings  
key.  
.
Text Message  
This option allows you to change your Text Message settings. You can change  
the following:  
Delivery Options: press the  
key to check or uncheck the Keep a Copy  
option checkbox.  
Email Gateway Address: provides information regarding the Email Gateway Address.  
Messages  
43  
     
Multimedia Message  
The following Multimedia message options are available:  
Delivery Options:  
Priority: you can select the priority level of your messages.  
Expiration: select the length of time you wish the message you sent to remain on the MMS  
server.  
Delivery Time: you can set a time delay before the phone sends your messages.  
Message Size: you can set the maximum allowed size for a multimedia message.  
Get Delivery Report: when this option is enabled, the network informs you whether or not  
your message was delivered.  
Get Read Report: when this option is enabled, your phone sends a request for a reply along  
with your message to the recipient.  
Keep a Copy: you specify whether you want to keep a copy of the sent messages on your  
phone.  
Add My Business Card: you send your contact information along with your sent messages.  
Receiving Options: you can specify the category of messages you want to receive. Allows  
you to set the following:  
Send Read Report: when this option is enabled, your phone sends a notification back to the  
recipient indicating that your message was read. Select between Allowed, Never, or Always  
ask.  
Send Delivery Report: when this option is enabled, the phone allow the network report to the  
sender whether or not the message was received.  
Reject Anonymous: allows you to automatically reject messages with a category of  
anonymous.  
Reject Advertisement: allows you to automatically reject messages with a category of  
advertisement.  
44  
Auto Resize Image: you can specify that an attached image be resized as follows:  
No Resize  
100 KB  
300 KB  
600 KB  
Creation Mode: you can specify that the users creating new media content be given the  
following options:  
Free: create a multimedia message with no restrictions.  
Warning: sends a warning when unsupported content is included in a message.  
Restricted: prevents you from including unsupported content.  
Default Style: you can specify the default visual parameters used by this type of message:  
Font Color  
Font Style  
Background Color  
Slide Duration  
Using Email  
Signing into Your Email  
To sign into Email, follow these steps:  
1. Press Menu  
Messages  
Email.  
2. Follow on-screen instructions to complete the process.  
Messages  
45  
 
Section 6: Managing Your Contacts  
This section describes how to store names and numbers in your Contacts.  
Contacts Settings  
1. Press Menu  
Contacts  
Contacts Settings.  
2. Press any of the following options to activate a function:  
• My Business Card: creates and attaches a virtual business card as an attachment to  
outgoing messages. For more information, see “Attaching Business Card to a  
Message” on page 41.  
• Save New Contacts to: defines the destination for new contact entries (Phone Memory,  
SIM Card, or Always Ask).  
• View Contacts from: to filter the display of current Contacts entries. Options include:  
All, Phone Memory, or SIM Memory.  
• Own Number: to display your current phone number (page 52).  
• FDN Contacts: assigns phone numbers as FDN entries (page 53).  
• UsedSpace: displays the memory storage allocation (total available and remaining) within  
your Phone, SIM card, Additional No. 1, and FDN Contacts.  
Adding a New Contact  
Use the following procedure to store a new contact to your Contacts list. New  
contacts are stored on your phone by default.  
Saving a Number from the Idle screen  
1. Press Menu  
Contacts  
Add New Contact. The Add New Contact screen  
2. Highlight the First Name Last Name, and Display Name fields and use the  
,
QWERTY keypad to enter names for this contact. For more information, refer  
to “Entering Text” on page 33.  
46  
         
3. Press the Mobile, private field and use the QWERTY keypad to enter the phone  
number for this contact.  
4. Highlight the Landline private field and use the QWERTY keypad to enter the  
,
landline number for this contact.  
5. Highlight the Email, private field and use the QWERTY keypad to enter a  
private email address for this contact.  
6. Highlight the Group field and press  
7. Highlight the Picture field and press  
. Select a group name and press  
.
.
9. Select a tone to represent this contact and press Options  
Select.  
10. Highlight the Notes field and use the QWERTY keypad to enter a note. For  
more information, refer to “Entering Text” on page 33.  
11. Press Options  
Save.  
Note: By default, Contacts are saved on the phone. To copy them to a SIM card, see “Copying an  
Entry to the SIM Card” on page 57.  
Managing Your Contacts  
47  
Adding More Fields to a Number  
While in the process of creating a new entry or editing an existing contact,  
you can add additional fields to the entry’s list of information.  
1. Press Menu  
press  
Contacts  
Contacts, highlight a contact name and  
.
2. Press Options  
Edit  
.
3. Press Options  
Add More Fields  
.
4. From the Add Details field, use the Left or Right Navigation key to highlight  
the field to add and press Select or  
the Edit Contact screen.  
. The selected field type displays on  
5. Enter the information into the new field and press Options  
Save.  
Deleting Fields From a Number  
1. Press Menu  
press  
2. Press Options  
3. Highlight the field to delete and press Options  
Contacts  
Contacts, highlight a contact name and  
.
Edit.  
Delete Field.  
Note: Only certain new fields may be deleted. If you have not added any new fields to the contact,  
the Delete Field button does not display.  
4. Press Options  
Save.  
48  
Saving a Number During a Call  
1. During the call press Options  
Save to Contacts.  
2. At the prompt, select New  
.
Select Update if this was a previously created entry and your are adding the current  
3. Select the type of phone number and press Select or  
.
4. Enter the desired information, see “Saving a Number from the Idle screen” on  
page 46.  
Saving a Number After a Call Has Ended  
1. Press  
2. Highlight a phone number from the list and press Options  
3. From the Select Type screen, press New  
to bring up the Recent Calls screen.  
Save to Contacts.  
.
Select Update if this was a previously created entry and your are adding the current  
number to the previous entry.  
4. Enter the desired information. For more information, refer to “Saving a  
Number from the Idle screen” on page 46.  
Managing Your Contacts  
49  
Adding Pauses to Contact Numbers  
When you call automated systems, you are often required to enter a password or  
account number. Instead of manually entering the numbers each time, you can  
store the numbers in your Contacts along with special characters called pauses.  
To add a pause to a Contact:  
1. Press Menu  
press  
2. Press Options  
Contacts  
Contacts, highlight a contact name and  
.
Edit.  
3. Highlight the number type where you want to add the pause.  
4. Scroll to where you want to add the pause and press and hold  
to add  
a two-second pause, and use the keypad to enter any additional numbers  
if needed.  
Tip: You can create pauses longer than two seconds by entering multiple two-second pauses.  
5. Press Options  
Save to store your changes.  
50  
Using Contacts  
Dialing a Number from Contacts  
Once you have stored phone numbers in Contacts, you can dial them by using their  
SIM card location number or by using the Search field to locate the entry.  
Finding a Contacts Entry  
You can store phone numbers and their corresponding names onto your SIM card  
and phone’s onboard memory. The two locations are physically separate but are  
used as a single entity, called the Address Book.  
Depending on your particular SIM card, the maximum number of phone numbers  
the SIM card can store and how they are stored may differ.  
1. In Idle mode, press Menu  
Contacts  
Contacts.  
2. Use the Up or Down Navigation key to locate a contact.  
Tip: The Groups tab allows you to locate contacts by group. Use the Left or Right Navigation key to  
move between Contacts and Groups.  
3. Press the  
key or Options  
Call to call the contact.  
Managing Your Contacts  
51  
 
Contacts Entry Options  
To access the Contacts options, follow these steps:  
1. Press Menu  
Contacts  
Contacts and select an entry from the list and  
press the  
key.  
2. Press Options and select from the following:  
• Edit: allows you to make changes to the contact information.  
• Call  
• Send Message  
selected entry.  
:
allows you to call a currently selected entry.  
:
allows you to send a text message or a multimedia message to the  
• Delete: delete the current Contacts entry from a target location such as the Phone and/or  
SIM card.  
• Send Business Card via: allows you to send a business card to the selected contact  
via Message, Email, Exchange Email, or Bluetooth.  
• Mark as Default Number  
:
allows you to Change, Save, or Reset the Default number  
and Message for a contact.  
• More allows you to Assign a Speed Dial number or save the contact to your  
:
FDN Contacts list.  
Finding My Own Phone Number  
This function is a memory aid, which you can use to check your own phone number  
if you need to do so.  
In Idle mode, press Menu  
<voice line #>  
Contacts  
Contacts Settings  
Own number  
.
52  
   
FDN Mode  
FDN (Fixed Dialing Number) mode, if supported by your SIM card, restricts your  
outgoing calls to a limited set of phone numbers. When this feature is enabled, you  
can make calls only to phone numbers stored in the FDN list on the SIM card.  
Note: FDN Mode must be set to On in the Menu  
Settings  
Phone  
Security  
Set FDN Mode  
option before you can add, change, or delete contacts on the FDN List.  
Changing the FDN mode Status  
1. In Idle mode, press Menu  
Settings  
Phone  
Security  
.
2. Scroll down to the Set FDN Mode field and press the  
key.  
3. Select On (to enable fixed dialing) or Off to disable the option and press Save  
.
4. Enter the PIN2 code if you selected On  
.
Important!: With Fixed Dial Mode enabled, you are NOT able to dial any number other than those  
created as FDN numbers.  
Managing Your Contacts  
53  
 
Creating New FDN Numbers  
With the Fixed Dial mode On, follow these procedures:  
1. In Idle mode, press Menu  
2. Press Options Create FDN contacts  
3. Enter your PIN2 password and press the  
Contacts  
FDN Contacts.  
.
key.  
Note: The PIN2 code is provided by your Service Provider.  
4. Press Name and use the QWERTY keypad to enter a name for this FDN  
contact.  
5. Press Phone Number and use the QWERTY keypad to enter a contact phone  
number for this FDN contact.  
6. Highlight the SIM card location field and use the QWERTY keypad to enter a  
location value for the entry on the SIM card.  
7. Press Options  
Save to store the new FDN entry.  
8. Press to return to Idle mode.  
54  
Group Settings  
Creating a New Group  
1. In Idle mode, press Menu  
Contacts  
Groups.  
2. Press Options  
3. Enter a name for this group in the New Group field and press Save  
4. Press Options Group Settings  
5. Highlight the Picture field and press the  
6. Select an image and press Options Select or the  
Create group.  
.
.
key.  
key. The selected  
image displays in the Picture field and displays the name of the image to  
the right.  
7. Highlight the Ringtone field and press the  
8. Highlight an audio file and press Options  
9. Press Options Save  
10. Press Back to return to the Contacts.  
11. Press to return to Idle mode.  
key.  
Select  
.
.
Adding an Entry to a Group  
1. In Idle mode, press Menu  
Contacts  
Groups.  
2. Highlight a group entry and press the  
3. Press Options  
key.  
Add Member, then press the  
key.  
4. Highlight a member from the list or highlight All and press Check. A  
checkmark beside the name indicates adding this person to the group.  
5. Press Add  
.
Managing Your Contacts  
55  
 
Removing an Entry From a Group  
Contacts  
2. Highlight a group entry and press the  
1. In Idle mode, press Menu  
Groups.  
key.  
3. Highlight the member to delete from this group and press Options  
Remove.  
4. Highlight a member from the list or highlight All and press Check. A  
checkmark beside the name indicates removing this person from the group.  
5. Press the Remove soft key.  
Renaming a Caller Group  
1. In Idle mode, press Menu  
2. Highlight the group that you want to rename.  
3. Press Options Rename  
4. Backspace over the original name and use the keypad to enter a new name  
Contacts  
Groups.  
.
for this group, then press Save  
.
Adding Speed Dial Entries  
1. In Idle mode, press Menu  
2. Highlight a position (2-9) on the keypad in which to assign the speed dial  
number and press Options Assign  
3. Select Address Book or FDN Contacts and press the  
4. Highlight the contact to assign to the speed dial location and press Select or  
the key. The contact is automatically assigned to the speed dial location.  
Contacts  
Speed Dial List.  
.
key.  
56  
 
Managing Contacts Entries  
You can copy, delete, and view the memory status for the Phone and SIM entries on  
your phone.  
Copying an Entry to the SIM Card  
Note: When storing a Contacts entry into the SIM card, note that only the name, phone number,  
group, and slot location are initially offered as fields (some SIM cards may allow an address  
as well). To save additional information for a particular contact, such as other phone  
numbers, or e-mail, it is important to add new fields to that Contact information. It is also  
important to note that if you move the SIM card to another phone that does not support  
additional fields on the SIM card, this additional information may not be available.  
1. In Idle mode, press Menu  
SIM  
2. Highlight a member from the list or highlight All and press Check  
3. Press Copy  
Contacts  
SIM Management  
Copy Contacts to  
.
.
.
Important!: When copying from the Phone to the SIM card some information may be lost.  
4. At the Continue? prompt, press Yes to copy the contact, or No to cancel.  
5. Press  
to return to Idle mode.  
Managing Your Contacts  
57  
   
Copying an Entry to the Phone  
1. In Idle mode, press Menu  
Contacts  
SIM Management  
Copy Contacts  
from SIM. The phone displays a list of your current contacts stored on the SIM  
card.  
Note: If the entry’s associated Group image has a SIM location icon on it, then the entry exists on  
the SIM card. This is the type you can duplicate. If the entry’s associated Group image does  
not have a SIM location icon, then this entry currently exists on the phone.  
2. Highlight a member from the list and press Check  
3. Repeat Step 3 for each entry you want to copy to the Phone or highlight All  
and press the key to place a checkmark alongside all entries.  
4. Press Copy  
5. Press to return to Idle mode.  
.
.
Deleting an Contacts Entry  
You can delete a Phone or SIM entry from your phone’s memory.  
Deleting an entry from the Phone  
1. In Idle mode, press Menu  
2. Highlight a contact to delete and press the  
3. Press Options Delete  
Contacts  
Contacts  
.
key.  
.
4. At the Delete Contact? prompt, press Yes to delete the contact, or No to  
cancel.  
5. Press  
to return to Idle mode.  
58  
Deleting all entries from the SIM  
1. In Idle mode, press Menu  
from SIM  
Contacts  
SIM Management  
Delete Contacts  
.
2. Highlight a member from the list or highlight All and press  
to create a  
checkmark.  
3. Press Delete  
4. At the prompt, press Yes to delete the contact, or No to cancel.  
5. Press to return to Idle mode.  
.
Managing Your Contacts  
59  
Section 7: Browser  
This section outlines the Browser features available on your phone. For more  
information, contact your service provider.  
Browser  
Your phone is equipped with Wireless Application Protocol (WAP), a WAP browser  
that provides access to the Web using your phone.  
To access the Mobile Web browser from the Idle screen, press Menu  
Browser.  
The Browser menu displays the following options:  
Home: go to Mobile Web homepage.  
Enter URL: allows you to enter a URL, the option to add it to your favorites and create a title.  
Favorites: view your favorites list.  
Saved Pages: view your saved pages  
History: view a listing of your recently visited sites.  
Browser Settings  
:
Clear Caches: press to clear.  
Cookies: choose options to Empty Cookies, and options regarding cookies, Accept All  
,
Reject All, or Prompt  
Preferences: choose from options, Run JavaScript  
Run Flash  
About Browser: provides information about your browser.  
,
Display Images, Play Sound, and  
.
Home  
To access the Mobile Web directly, press the Browser soft key on the Idle screen.  
Your browser connects the phone to the network and loads the browser homepage.  
The content of the Browser startup homepage depends on your Wireless Web  
service provider.  
To scroll through the web pages, use the Up and Down keys.  
60  
     
To go to the startup homepage from any other screen in the Browser, use the  
Home option.  
Press Options to see the following:  
Open: go to homepage.  
Navigate: choose to Reload or go to Homepage  
Smart-width view: allows you viewing options.  
View Favorites: view your favorites list.  
Add to Favorites: add to your favorites list.  
Enter URL: allows you to enter a URL, the option to add it to your favorites and create a title.  
Advanced: choose to view a history of the sites you visited, to save a site to your history,  
and to save pages to view at another time.  
.
Browser Settings: provides access to the following settings:  
Clear Caches: press to clear.  
Cookies: choose options to Empty Cookies, and options regarding cookies, Accept All  
,
Reject All, or Prompt  
Clear session storage: select option to receive prompt, Clear session storage? Yes or No  
Preferences: choose from options, Run JavaScript Display Images Play Sound, and  
Run Flash  
About Browser: provides information about your browser.  
.
,
,
.
Exiting the Browser  
To exit the browser at any time, press the  
key.  
The prompt displays, Exit Browser? Yes or No. Make your selection.  
Navigating the Browser  
1. To scroll through browser items, press the Up or Down Navigation key.  
2. To select browser items, press the  
key.  
3. To return to the previous page, press the Back soft key or the  
key.  
4. Press the Back soft key until the startup Home page displays.  
Browser  
61  
   
Favorites  
To store a URL address:  
In Idle mode, press Menu Browser Favorites and press the Select soft key  
or the key.  
Enter URL  
This menu allows you to manually enter the URL address of a web site that you wish  
to access and to add it to your Favorites.  
In Idle mode, press Menu Browser Enter URL and press the Select soft  
key or the  
key.  
Clear Cache  
You can clear the information stored in the cache memory, the phone’s temporary  
memory that stores the most recently accessed Web pages.  
In Idle mode, press Menu Browser Browser Settings Clear Cache and  
press the Select soft key or the key.  
62  
     
Section 8: My Folder  
The topics covered in this section include Audio, Games&Apps, Pictures, Video,  
Other Files, and Used Space.  
1. Press Menu  
2. Select from one of the following functions: Audio  
Video Other Files, or Used Space  
My Folder.  
,
Games&Apps, Pictures,  
,
.
3. Highlight the On phone tab or On card tab by moving left or right with the  
navigation keys to filter the entries based on their current location (Phone, or  
Memory Card).  
Creating a New Folder  
1. Press Menu  
My Folder  
On card (tab)  
Options  
Create Folder  
.
2. Use the keypad to create a new name for the folder and press OK  
.
Memory Card Settings  
Using the Memory Card settings menu you can view memory card details, format or  
rename the memory card, or turn Bluetooth visibility on.  
1. Press Menu  
My Folder  
On card (tab)  
Options  
Memory Card Settings.  
2. Select one of the following and press the  
key:  
• Memory Card Details: displays details about the memory card such as Name, Maximum  
memory, and Available memory. Press Back after viewing.  
• Format: formats the memory card. This will remove all data from the memory card.  
• Rename Memory Card: allows you to rename the memory card. Backspace and enter a  
new name for the memory card then press Save  
.
• Bluetooth Visibility On/Off: allows you to enable Bluetooth visibility for this memory card.  
Press the key to activate Bluetooth visibility. Press the key again to turn it off.  
My Folder  
63  
   
Audio  
The Audio menu option allows you to shop tones, answer tones, and music using  
AppCenter. You can also access previously stored (pre-recorded) audio files from  
your internal microSD card.  
1. Press Menu  
My Folder  
Audio  
.
2. Highlight an option (Ringtones  
,
Music, or Recorded Audio).  
Tones  
You can shop, download, and save to your Downloaded Ringtones folder.  
1. Press Menu My Folder Audio Ringtones. A menu displays to provide  
the option of either shopping for tones or selecting from files previously  
stored to your phone.  
2. Select Buy Ringtones, select a file to download, and follow the on-screen  
instructions.  
3. From the playback page, press Options  
Set as and select from the  
following options:  
• Call Ringtone: allows you to assign the selected ringtone for use with general incoming  
calls when no other caller ringtone has been assigned.  
• Caller Ringtone: allows you to assign a ringtone to someone in your Contacts list. Select  
Search contact to find an existing contact or Create contact to create a new one.  
• Alarm tone: allows you to assign the tone to an alarm.  
64  
   
Music  
This menu displays all of your purchased songs.  
Press Menu  
My Folder  
Audio  
Music.  
Recorded Audio  
This menu shows a list of saved voice memos. When a voice memo is recorded and  
saved, it is stored in the Recorded Audio folder. To access this menu use the  
following steps:  
1. Press Menu  
My Folder  
Audio  
Recorded Audio.  
2. Select a pre-recorded audio to begin playback.  
3. Press Back to exit.  
Creating a new audio recording  
1. Press Menu  
Tools  
Record Audio.  
2. To start recording, press Record  
.
For more information, refer to “Record Audio” on page 78.  
Games&Apps  
The Games&Apps menu option allows you to shop for games. You can download  
new games, then save them to the Games&Apps folder.  
My Folder  
65  
 
Pictures  
The Pictures menu option allows you to shop for and download new graphics and  
save them to your Pictures folder. To access the Pictures menu option, use the  
following steps:  
1. Press Menu  
My Folder  
Pictures.  
2. Highlight a picture and press Options  
.
Depending on the type of picture or file the following options may display:  
• View: allows you to view the selected picture.  
• Set as: allows you to set the selected picture as Wallpaper or as a Caller ID.  
Take Photo: launches the camera to allow you to take a photo.  
• Create Folder: creates a new sub-folder in the Pictures folder.  
• More: provides you with the ability to Sort by or to view the file Properties.  
Shop Wallpapers  
1. Press Menu  
My Folder  
Pictures  
Buy Graphics. AppCenter launches.  
2. Follow the on-screen instructions to purchase the new graphics. The file  
downloads and stores in the Pictures folder.  
66  
 
Image Features  
Highlight an image from the Pictures page and press the  
image.  
key to display the  
1. Use the Left or Right navigation keys to scroll through all the pictures in your  
Pictures folder.  
2. Press the  
key to activate Zoom mode. Then use the Left or Right soft  
keys to Zoom in or Zoom out  
.
3. Press Options. Depending on the image type, the following options may be  
displayed:  
• Zoom: activates Zoom mode so you can use the Left or Right soft keys to Zoom in or  
Zoom out.  
• Send via: allows you to send a picture via Message, Email, Exchange Email, or Bluetooth.  
• Set as: allows you to assign the current image as either your current Wallpaper, or as a  
Caller ID image used by a specific entry in the Address Book.  
• Delete: allows you to delete the image.  
• Rename: allows you to rename the image.  
• Edit image: allows you to edit the image.  
• Bluetooth visibility: allows you to make the image file visible to a Bluetooth device.  
• Slide show: allows you play a slideshow using the graphics currently available from within  
the Pictures folder.  
• Print via: allows you to print via USB or Bluetooth.  
• Lock: allows you to lock/unlock the image file. Lock prevents the image file from deletion.  
Unlock allows deletion.  
• Properties: allows you to view the properties of an image.  
Note: Editing is only available for unlocked images or non DRM images.  
My Folder  
67  
Editing Images  
1. Press Menu  
My Folder  
Pictures  
<image> and the  
key.  
2. Press Options  
Edit image.  
3. Press Options and select one of the following:  
• Save as: allows you to save the picture on your phone or memory card.  
• Effects: allows you to choose from among several effects such as: Filter  
,
Style, Warp, or  
Partial blur  
.
• Adjust: allows you to adjust Brightness  
Transform: allows you to Resize Rotate, or Flip the image.  
• Crop: allows you to crop the image. Use the Navigation keys to place the red box around  
the image until you center a portion in the box, then press Options Crop  
• Insert: allows you to add Frames Clip Art Emoticon, or Text to the image.  
,
Contrast, and Color  
.
,
.
,
,
• Set as: allows you to assign the current image as either your current Wallpaper, or as a  
Caller ID image used by a specific entry in the Address Book.  
• Send: allows you to send this picture via Message or via Bluetooth.  
• Print via Bluetooth: allows you to print the image via Bluetooth.  
4. Press  
to return to Idle mode.  
68  
Video  
This menu allows you to set up folders to save your videos files.  
1. Press Menu  
2. Highlight a video file and press Options to choose from the following:  
• Play plays the highlighted video file.  
• Send via: send via Message Email Exchange Email, or Bluetooth  
• Delete: delete selected or multiple files.  
My Folder  
Video. A list of your saved video files displays.  
:
,
,
.
• Rename: allows you to rename your video file.  
• Move: move selected or multiple files.  
• Copy: copy selected or multiple files.  
• Record Video: allows you to record another video.  
• Create Folder: allows you to create a new folder.  
• More: allows access to the following options: Lock/Unlock  
;
Bluetooth Visibility  
;
Sort  
by Date Type, Name, or Size; and Properties.  
,
3. During the video play, press Options to choose from the following:  
• Pause/Resume: to start and resume the video play.  
• Stop: to stop the video play.  
• Portrait/Landscape: to switch from Portrait to Landscape mode.  
• Transfer to Bluetooth stereo headset: to transfer to a Bluetooth stereo headset.  
• Send via: allows you to send your video in a Message, Email, Exchange Email, or  
Bluetooth.  
• Jump to track time: allows you to view the video duration in digital time.  
• Properties: allows you to view basic details about your video file.  
My Folder  
69  
 
Other Files  
This feature provide additional storage of other miscellaneous file types that may  
not fit into any of the previous categories.  
Access the Other Files menu by selecting My Folder  
Other Files.  
Used Space  
The Used Space menu option allows you to view the usage and available memory  
for Audio, Games, Pictures, Video, and Other Files. To access the Used Space  
option, use the following steps:  
1. Press Menu  
The memory usage for the different items displays.  
2. Highlight Audio Games&Apps Pictures Video, or Other Files  
3. Highlight the item you want to delete (to free up memory) and press Select or  
press the key. Highlight an item in the list and press Check to place a  
My Folder  
Used Space.  
,
,
,
.
checkmark next to the item.  
4. Check All to delete all items.  
5. Press Delete  
.
6. At the Delete? prompt, press Yes to delete the item or No to exit.  
70  
   
Section 9: Applications  
Your phone includes applications that allow you to use your handset for a variety of  
activities.  
The Music application can organize and play music files stored on your phone  
and memory card. Create playlists, add, rearrange and remove files, and launch  
the browser to shop for more music. To access the Music player menu, press  
Menu  
Music.  
Voice Services application provides the Nuance Voice Recognition software, an  
advanced speech recognition software used to activate a variety of functions on  
your phone. To access the Voice Services menu, press Menu  
Voice Services.  
The Tools menu provides access to the following: Camera, Record Audio, Alarms,  
Calendar, Tasks, Memo, Calculator, Tip Calculator, Eco Calculator, Converter, World  
Clock, Timer, and Stopwatch. To access the tools menu, press Menu  
Tools.  
Music  
The Music application can organize and play music files stored on your phone and  
memory card. Create playlists, add, rearrange and remove files, and launch the  
browser to shop for more music.  
Launching the Music application allows you to navigate within your Music folders  
and select playback material.  
1. In Idle mode, press Menu  
Music.  
2. Highlight a folder from the folders available and press the  
key to  
open the folder.  
3. Highlight a song and press the  
key to play the song.  
Applications  
71  
   
Music Options  
The Music options menu configures your phone’s music playing options such as  
shuffling the music files, looping music files, and adding songs to the playlist.  
1. In Idle mode, press Menu  
Tools  
Music.  
2. Navigate to a music file and press the  
key. The music file will begin  
to play.  
3. Press the Options soft key and select one of the  
following options:  
Transfer to Bluetooth stereo headset: transfers the selected music file to a Bluetooth  
stereo headset.  
• Repeat mode repeats the currently active song or replays each song in the  
:
current list and as the last song in the list ends, the player replays all of the  
songs in the listed order. Select Off, 1, or All.  
• Shuffle on /off: allows you to turn shuffle On or Off. When turned on, the current list of  
songs are randomly shuffled for playback.  
• Add to Playlist: adds the currently active song to either a new or current playlist.  
• Send via: sends the selected music file in a message, email, exchange email, or to a  
Bluetooth enabled device.  
• Properties: displays properties related to the selected song: name, format, size,  
forwarding, date created, location, artist, title, album, track length, genre, copyright,  
recording date, description, trac number, and format.  
• Settings: allows you to set Background playing to on or off, and allows you to set the  
Sound effects to Normal, Rock, Pop, Dance, Classic, Jazz, Wide, Dynamic, or Surround.  
Sound effects is similar to an Equalizer.  
4. Press the Select soft key and follow the prompts to set the selected option.  
72  
Playing Music Transferred to the Handset  
Music  
2. Use the Up or Down Navigation key to select the song you want to listen to  
and press the key.  
1. In Idle mode, press Menu  
.
Playing Music through a Stereo Bluetooth Device  
Your device supports the Stereo Bluetooth profile that when synchronized to a  
stereo Bluetooth headset plays music in stereo.  
1. Pair your handset to a stereo Bluetooth device.  
2. In Idle mode, press Menu  
Tools  
Music.  
3. Select a song and press the  
key to play the song.  
Applications  
73  
Playing Music while Using the Phone  
The Music application allows you to play music in the background while performing  
other tasks on your phone. The music pauses when an incoming call is accepted,  
and the music resumes when the call ends. Music continues to play when you  
receive a Text Message, Multimedia Message, or an Instant Message.  
The other functions you can use are:  
Call: make or receive a call (music player is paused)  
Messaging: send or receive a text or multimedia message. Music continues to play unless  
an audio clip is received as a part of a multimedia message.  
Mobile Web: browse the web (music continues to play).  
Games: lets you play games while listening to music.  
Note: Playing music and pausing the music player uses the same amount of battery.  
1. In Idle mode, press Menu  
Music.  
2. Select a folder and press the Select soft key or the  
key.  
3. Highlight a song to play and press the  
key twice.  
key.  
4. To minimize the Music application, press the  
5. Press the Rewind  
temporarily stop the music, press Pause (Center  
Forward Right Navigation key) to advance to the next song. While playing the  
music in Idle mode, you can exit the Music player by pressing the key.  
(Left Navigation key) to navigate to the previous song. To  
key). Press the Fast  
(
After the Music Player enables, you can listen to music in the background while  
performing other phone functions.  
Important!: When finished using the Music player function, press the  
key twice to stop the  
function and prevent unnecessary battery drain. Pausing the player continues to use  
the battery.  
74  
Using Playlists  
Playlists are used to assign songs to a list of preferred media which can then be  
grouped into a list for later playback. These Playlists can be created via either the  
handset’s Music player options menu or from within a 3rd party music application  
(such as Windows Media Player) and then downloaded to the handset.  
Creating a Playlist  
1. In Idle mode, press Menu  
Music Library Playlists Create playlist.  
2. Enter a playlist name in the Enter name field and press the Save soft key.  
3. Select All tracks and press the Select soft key or the  
key.  
4. Select a song or All from the list and press the  
to place a check mark  
next to the song.  
5. Press the Add soft key.  
6. To continue creating the playlist, highlight the playlist you just created,  
press Options Add Tracks to continue adding music from your phone  
or memory card.  
7. Press the key to return to Idle mode.  
Adding Songs to a Playlist  
1. In Idle mode, press Menu  
Music Library.  
key.  
2. Highlight Playlists and press the  
3. Highlight the previously created playlist.  
4. Press the Options soft key, select Add Tracks and press the  
key.  
5. Highlight All, an individual song, or multiple songs and press the  
key to  
place a check mark beside your selection.  
6. Press the Add soft key and wait for the song to add to the current playlist.  
Applications  
75  
Removing songs from a Playlist  
1. In Idle mode, press Menu  
Music Library.  
key.  
2. Highlight Playlists and press the  
3. Highlight the previously created playlist and press the Right Navigation key.  
The tracks added display.  
4. Highlight the track to delete, press the Options soft key, scroll to Remove and  
press the Select soft key or the  
key.  
5. At the Remove ? prompt press the Yes soft key to remove the song from the  
playlist, or press the No soft key to cancel.  
6. Press  
to end.  
Voice Recognition  
Nuance Voice Recognition software is an advanced speech recognition software  
used to activate a wide variety of functions on your phone. Nuance software  
automatically voice activates (up to 1,000 contacts) for voice dialing and searching.  
No pre-recording or training needed. Speak a contact name naturally to dial, and  
use your voice to look up contacts, launch applications and navigate phone menus.  
1. Press Menu Voice Services.  
2. At the voice prompt, say a command. Following is a list of available  
commands.  
Note: This list of voice commands briefly displays.  
76  
 
Say a Command Options  
Call <Name or #>: dials a name or number listed in your contact list. If multiple numbers  
exist (i.e. home, work, or other) say the name and the number type (location).  
Send Message <Name or #>: displays the Create Text Message screen.  
Lookup <Name>: allows you use a voice command to locate and display contact  
information stored in the Contacts list.  
Go To <App>: accesses all the features of your phone if they are activated, such as: Voice  
mail, Contacts, Ringtones, Calendar, Tasks, and Browser.  
Check <Item>: lets you check your phone's status in the same report (Status, Messages,  
Missed Calls, Time, Signal strength, Network, Battery, My Phone Number, and Volume).  
While the Say a Command screen displays you have two options:  
Tutorial: provides examples of how to use the voice commands.  
Settings: lists the settings for voice command software such as: Confirmation, Adaptation,  
Audio Modes, Speakerphone, and About.  
If the phone does not recognize your command, the Command not recognized  
screen displays with two options:  
Help: provides instructions on how to use voice commands.  
Restart: press and try the command options again.  
Speak clearly when giving your command. There is no need for you to speak slowly  
or with added emphasis. The voice recognition software has been optimized to  
understand your speech in its natural form. If it does not recognize your command  
after a few seconds, a voice prompt asks you to repeat the command. If it does not  
recognize your command again, the following message displays “Sorry, no match  
found,” and voice recognition turns off.  
You must end your current Voice Commands call before you can make another call  
using Voice Commands. You can only originate the first call in a 3-way call using  
Voice Commands.  
Applications  
77  
Voice Recognition Tips  
Wait for the tone before you speak.  
Speak clearly and at a normal volume.  
There is no need to use paused speech. The voice recognition software has been trained to  
recognize natural speech, and performs best when you speak naturally.  
In very noise environments, it may be helpful to use a headset or a Bluetooth headset.  
Contacts List Voice Activation  
On startup, Nuance Voice Recognition software reads your Contacts list and voice-  
activates all the names.  
When you add or change contacts, the software automatically reloads and voice-  
activates the list when you add or modify a contact.  
Tools  
Camera  
For detailed information regarding the use of our phone camera, see“Camera” on  
page 117.  
Record Audio  
Record Audio allows you to record voice memos. It also allows you to send your  
audio clip to other people as an attachment of an MMS message. Recording time  
will vary based on the available memory within the phone.  
1. Press Menu  
Tools Record Audio. For more information, refer to “Audio”  
on page 64.  
2. To start recording, press . Record a memo by speaking into the  
microphone.  
78  
   
3. During the recording process you can either press Stop to stop the recording  
or Pause to temporarily halt the recording. Once the audio recording has  
stopped, the message is automatically saved.  
4. Once stopped, press Options to choose from one of the following options:  
• Play: allows you to play the memo.  
• Record: allows you to save the current memo and begin another session.  
• My Voice Clips: allows you to listen to your audio clips.  
• Record Audio Settings: allows you to set the Recording Time (Limit for MMS, 1 min, 2  
min, 3 min, 4 min, 5 min, or 60 min).  
• Send via: allows you to send your voice clip to other people using a message, an email,  
exchange email, or a Bluetooth enabled device.  
• Set as: allows you to set the current memo as a Call Ringtone, a Caller Ringtone for a  
specific entry or an Alarm tone.  
• Delete: allows you to delete the current memo.  
• More: displays the following additional options:  
Rename: allows you to rename the audio file.  
Lock/Unlock: allows you to lock/unlock the Audio file. Lock prevents the audio file from  
deletion. Unlock allows deletion.  
Bluetooth Visibility: allows you to make the audio file visible to a Bluetooth device.  
Properties: displays the Name, Format, Size, Forwarding, Creation Date and Time, and Location  
of the voice memo.  
5. Press  
or press  
to exit.  
Applications  
79  
Alarms  
This feature allows you to set an alarm to ring at a specific time.  
1. Press Menu  
Tools  
Alarms.  
The following options display:  
• Wake-up Alarm: the alarm rings to wake you up at the specified time.  
• Alarm 1: primary alarm setting.  
• Alarm 2: secondary alarm setting.  
• Alarm 3: third alarm setting.  
• Alarm 4: fourth alarm setting.  
• Auto power: the alarm rings even when the phone is turned off.  
2. Select an alarm type and press the  
key.  
– or –  
Press Options  
Create alarm.  
3. Set the following options:  
• Name: allows you to use a specific name for the alarm. The name you enter will display  
on the screen when the alarm activates.  
• Alarm activation: use the Left or Right Navigation key to select On or Off.  
• Alarm time: use the Left or Right Navigation key to highlight the minutes or hours field  
and enter a number using the QWERTY keypad. Highlight am/pm and use the Right  
Navigation key to change to am or pm. Press Save to save the new values.  
Note: To change the time format, see “Time and Date” on page 97.  
• Alarm type: sets the way in which the alarm sounds when activated (Melody, Increasing  
Melody, Vibration, Vibration then Melody, Vibration and Melody, and Vibration and  
Increasing Melody).  
• Alarm tone: sets the sound file which is played when the alarm is activated.  
80  
• Alarm volume: adjusts the alarm’s volume (1 - 7).  
• Recurrence: use this option to set the repeating status for the alarm by placing a  
checkmark alongside those days you would like to use for the current alarm. Everyday  
places a checkmark alongside all days.  
• Snooze: use this option to set a Snooze Duration (Off, 5, 10, 15, 20, or 30 Minutes).  
• Repeat: choose a Snooze Repeat (1, 2, 3, 5, or 10 Times).  
4. Press Save to store the alarm details.  
Setting Auto Power-up Alarms  
You can set the phone to ring the alarm when the time for an alarm comes, even if  
the phone is switched off.  
1. Press Menu  
2. Highlight Auto power and press the  
3. Select On and press Save  
Tools  
Alarms.  
key.  
.
Note: If the menu option is set to Off, and the phone is switched off at the specified time, the alarm  
does not ring.  
Turning Off an Alarm  
To stop the alarm when it rings press  
or any other external key such as the  
Volume key, Camera key, Back key, Soft key, or Send key.  
Applications  
81  
Calendar  
The Calendar feature allows you to view the Month, Week, and Day layout views. It  
also shows any Missed Alarm Events that occurred.  
To display your calendar:  
Press Menu  
Tools  
Calendar. The Calendar displays in the default (Month)  
view.  
Creating a New Event  
1. Press Menu  
Tools  
Calendar.  
2. Press Options  
Create and press the Right Navigation key.  
3. Select one of the following event types and press the  
key.  
• Appointment  
• Anniversary  
• Holiday  
• Important  
• Private  
Other options for the Calendar include:  
• View: allows you to view a specified date.  
• View By: allows you to choose between day view or week view.  
• Create: allows you to select an event category: Appointments, Anniversaries, Holidays,  
Important or Private event.  
• Go to: allows you to go to your today’s calendar or that of a specified date.  
• Event List: allows you to refer to your scheduled events stored on your calendar  
according to the type of event: Appointment, Anniversary, Holiday, Important or Private  
event.  
• Eco Day List: allows you to add important Eco-friendly holidays and events to your  
calendar.  
82  
• Delete: allows you to delete a calendar event. This option only appears if you have added  
events to your calendar.  
• Settings: this option allows you to configure the Calendar’s Starting Day and View by  
(Month, Week, or Day).  
• Missed alarm events: this option displays any missed events.  
• Used Space: this option displays a list of the different Calendar event categories along  
with the memory allocation for each.  
4. Highlight the Title field and use the QWERTY keypad to enter a name for this  
specific event (up to 15 characters).  
5. Select the Details field and enter a description for this event (up to 100  
characters).  
6. Highlight the Start date field and enter a date for this event to begin.  
7. Select the Start time field and enter a time for this event to begin. Use the  
Right Navigation key to set am or pm  
.
8. Highlight the End date field and enter a date for this event to end.  
9. Select the End time field and enter a time for this event to end.  
10. Highlight the Location field and enter a location description for this event (up  
to 15 characters).  
11. Highlight the Alarm check box and press Check if you want to set an alarm.  
Once selected, all remaining alarm settings are enabled.  
12. Highlight the Alarm tone field and press the  
13. Highlight an alarm tone, press  
key.  
.
then press Add  
14. Highlight the Repeat check box and press Check then scroll to the next field  
and use the Left or Right Navigation key to select the number of repetitions for  
this alarm (Daily, Weekly, or Monthly).  
Applications  
83  
15. Select the Every field and enter the number of times you want this alarm to  
repeat.  
16. Highlight the Except weekends checkbox and press Check to exempt non-  
work days (weekends) from the event notification.  
17. Select the Until field and assign an expiration date for this event.  
18. Press Save to store the new event.  
Viewing an Event  
1. Press Menu  
Tools  
Calendar  
Options  
Event list.  
2. Press the Right Navigation key and select an event type, then press the  
key. The events in the selected category display.  
3. Press Back or press  
to exit.  
Deleting an Event  
1. Press Menu  
Tools  
Calendar  
Options  
Event List.  
2. Press the Right Navigation key and select an event type, then press the  
key. The events in the selected category display.  
3. Highlight an event to delete and press Options  
Delete and press the Right  
Navigation key.  
4. Select Selected  
,
Multiple, or All and press the  
to exit.  
key.  
5. Press Back or press  
84  
Tasks  
This menu option allows you to create a “to do” entry of tasks which are created in  
a similar fashion to previously described Calendar entries.  
1. Press Menu  
Tools  
Tasks.  
2. Press Options  
Create  
.
3. Enter the information into the following fields and press Save  
:
• Title: enter a title for this task (up to 15 characters).  
• Details: enter a detailed description for this task (up to 100 characters).  
• Start date: enter a date for this task to begin.  
• Due date: enter a date for this task to end.  
• Alarm: allows you to trigger an alarm for this task. Press Check to select this option.  
• Alarm date: enter a date for this alarm (format is MM/DD/YYYY).  
• Alarm time: enter a time for this alarm to sound. Press Save to assign the new time.  
• Alarm tone: allows you to choose an alarm tone. Once selected, navigate to Tones, select  
a file, and press Select to assign the audio file as the current alarm tone.  
• Priority: allows you assign the task a priority (1-high, 2-medium, or 3-low).  
4. Press Save to store the new task.  
Memo  
This option allows you to create memos to add to your events.  
1. Press Menu  
Tools  
Memo.  
2. Press Options  
Create  
.
3. Use the keypad to enter a new note and press Options  
Save.  
Applications  
85  
Calculator  
With this feature, you can use the phone as a calculator. The calculator provides the  
basic arithmetic functions; addition, subtraction, multiplication, and division.  
1. Press Menu  
Tools  
Calculator.  
2. Enter the first number using the keypad.  
3. Enter the operation for your calculation by using the Navigation keys to select  
the arithmetic function.  
4. Enter the second number.  
5. To view the result, press  
.
Tip Calculator  
Tip Calculator automatically calculates the following amounts:  
Gratuity (tip)  
Individual payment (for groups)  
Calculations are based on the total amount of the check, a selected percentage, and  
the number of people paying.  
1. Press Menu  
Tools  
Tip Calculator.  
2. Highlight the Bill field and use the keypad to enter the total amount of the bill.  
3. Select the Tip (%) field and use the keypad to change the tip percentage.  
4. Enter the number of people splitting the bill in the # paying field.  
5. The amount of the Tip ($) and You pay displays.  
6. Press Reset to clear the fields and start over.  
86  
Eco Calculator  
The Eco Calculator calculates your automobile efficiency in dollars per mile and  
miles per gallon. It also calculates the emission of carbon dioxide assuming a gas-  
powered medium sized vehicle.  
1. In the Distance (mile) field, enter the distance you have driven.  
2. In the Fuel ($) field, enter the fuel cost in dollars.  
3. In the (gallon) field, enter the amount of fuel you used.  
4. Press the  
key.  
5. When the View Result option appears, press the  
key.  
6. The results are displayed.  
7. Press Options  
Reset to start over.  
Applications  
87  
Converter  
Your phone comes with a built-in conversion application. This conversion menu  
provides the following conversion categories:  
Currency  
Length  
Weight  
Volume  
Area  
Temperature  
1. Press Menu  
2. Select the specific converter function and press the  
Each converter function has a field for the type of unit to convert, and the type of unit to  
Tools  
Converter.  
key.  
convert to. An additional field allows you to input the unit amount to convert.  
3. Press the Right Navigation key to select the desired Unit.  
4. Highlight the field below the Unit and enter the value you are converting  
From.  
5. Highlight the Unit you are converting to and press the Right Navigation key  
to select the desired Unit.  
6. The resulting converted values (“to”) automatically displays below the second  
Unit field.  
7. Press Back or press  
to exit.  
88  
World Clock  
World Clock allows you to view the time of day or night in other parts of the world.  
World displays time in the 100 different cities, within all 24 time zones around the  
world. The time in your time zone is automatically displayed.  
To add another time zone:  
1. Press Menu  
Tools  
World Clock.  
2. Press Options  
Add  
.
3. Press the Left or Right Navigation key until you locate the desired  
global region.  
Important!: Time zones display in Greenwich Mean Time (GMT).  
4. Highlight Daylight saving and press the  
5. Press OK to set the time.  
key (if applicable).  
Deleting a World Clock Entry  
1. Press Menu  
2. Highlight a World Clock entry.  
3. Press Options Delete  
4. At the Delete? prompt, press Yes to delete or No to cancel.  
Tools  
World Clock.  
.
Applications  
89  
Timer  
You can use this menu to set a countdown timer. Use a timer to count down to an  
event based on a preset time length (hours, minutes, and seconds).  
1. Press Menu  
Tools  
Timer.  
2. Press Set and use the keypad to enter a countdown time length for the alert  
by setting the Hours, Minutes, and Seconds value then press the OK soft key.  
3. Press the  
key to begin the timer.  
4. Press the  
key twice to pause the timer.  
Stopwatch  
You can use this menu to measure intervals of time.  
1. Press Menu Tools Stopwatch  
2. Press Start to start the lap counter.  
3. Press Stop to stop the stopwatch or press Lap to mark a unit of time per lap.  
You can record multiple lap times.  
4. Press Reset to erase all times recorded.  
90  
Section 10: Changing Your Settings  
This section describes the Settings menu for your phone. It includes settings for the  
following: Sound Profile, Display, Time and Date, Phone, Calls, Connectivity,  
Applications Settings, and Memory Mangement.  
Sound Profile  
The Sound Profile menu allows you to specify how you are informed of incoming  
calls and messages as well as other notification sounds your phone can make.  
The steps for modifying the Normal sound profile are described in detail. You can  
apply similar steps to modify the other sound profiles: Silent  
,
Driving, Outdoor,  
and Eco  
.
Selecting a Profile  
1. In Idle mode, select Menu  
Settings  
Sound Profile  
.
2. Highlight a profile type and press  
. The selected profile activates.  
Choices include:  
• Normal: default sound profile where the incoming Alert Type is set to melody.  
You can modify Normal settings for Call, Message and Phone.  
• Silent: allows you to select mute or vibrate alerts that stop the phone from  
making noise, in a theater for example. You can modify Silent settings for Call,  
Message and Phone.  
• Driving: allows you to select alerts that you can hear easily while driving. You  
can modify Driving settings for Call, Message and Phone.  
• Outdoor: allows you to select alerts that you can hear in outdoor conditions by  
adjusting the volume, vibration and the tones. You can modify Outdoor settings  
for Call, Message and Phone.  
• Eco  
:
allows you to set your phone to the most energy efficient sound  
settings.  
Changing Your Settings  
91  
   
Editing the Normal - Call Profile  
The phone’s profile defaults to Normal where the incoming Alert Type is set to  
melody.  
1. In Idle mode, select Menu  
Settings  
Sound Profile  
2. Highlight Normal and press Edit  
.
3. Highlight the Call tab.  
4. Highlight Call Alert Type and press  
.
5. Select one of the following and press OK  
:
• Melody: the phone rings using the ring melody selected in the Call Ringtone menu.  
• Vibration: the phone vibrates.  
• Vibration then Melody: the phone vibrates then plays a melody.  
• Vibration & Melody: the phone vibrates and plays a melody simultaneously.  
6. Highlight Call Ringtone and press  
7. Select one of the listed tones and press  
8. The tone will play. Press the Add soft key to add the tone.  
9. Highlight Ringtone Volume and press  
10. Use the Left or Right navigation key to adjust the volume level (range is 1-7)  
and press OK  
11. Press Save to save your selections and return to the Sound Profile menu.  
.
.
.
.
92  
Editing the Normal - Message Profile  
Settings  
1. In Idle mode, select Menu  
Sound Profile  
2. Highlight Normal and press Edit  
.
3. Highlight the Message tab.  
4. Highlight Message Alert Type and press  
.
5. Select one of the following:  
• Melody: the phone rings using the ring melody selected in the Message Alert Tone menu.  
• Vibration: the phone vibrates.  
• Vibration & Melody: the phone vibrates and plays a melody simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
6. Highlight Message Alert Tone and press  
.
7. Select one of the message tones and press Select. Press Play if you want to  
listen to it first.  
8. Highlight Message alert repetition and press  
.
9. Select one of the following and press OK  
.
• Once: repeats the message alert once.  
• Periodic: repeats the message alert periodically.  
10. Highlight Message Tone volume and press  
.
11. Use the Left or Right navigation key to adjust the volume level (range is 1-7)  
and press OK  
12. Press Save to return to the Sound Profile menu.  
.
Changing Your Settings  
93  
Editing the Normal - Phone Profile  
Settings  
1. In Idle mode, select Menu  
Sound Profile  
2. Highlight Normal and press Edit  
.
3. Highlight the Phone tab.  
4. Highlight Keypad Tone and press  
. Select one of the following tones and  
press OK  
:
• Beep  
• Lucid  
• Mute  
5. Highlight Power On Type and press  
.
6. Select one of the following and press OK  
:
• Melody: the phone rings using a pre-set melody.  
• Vibration: the phone vibrates.  
• Vibration & Melody: the phone vibrates and plays a melody simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
7. Highlight Power Off Type and press  
.
8. Select one of the following and press OK  
:
• Melody: the phone rings using a pre-set ring melody.  
• Vibration: the phone vibrates but does not ring.  
• Vibration & Melody: the phone vibrates and plays a melody simultaneously.  
• Mute: the phone is silent and does not play a melody or vibrate.  
9. Highlight Phone Sound Volume and press  
10. Use the Left or Right navigation key to adjust the volume level (range is 0-7)  
and press OK  
11. Press Save to return to the Sound Profile menu.  
.
.
94  
Display  
In this menu, you can change various settings for the display or lighting.  
1. In Idle mode, press Menu Settings Display.  
The following options are available:  
• Wallpaper: allows you to select Picture or None. None leaves the wallpaper blank. Press  
the Edit soft key, and scroll through the graphics in your Graphics folder (on the Phone or  
on an External Storage Card) to select your wallpaper. Press the Select soft key or the  
key to confirm the selection.  
• My Theme: allows you to select from three different themes. Make a selection and press  
the Save soft key.  
• Menu Style allows you to select whether the phone’s menus are presented in either a  
:
Grid Menu style or List Menu style. Highlight the desired menu and press the Save soft  
key.  
• Light Settings: allows you to adjust the Brightness and set the Backlight Time.  
Note: Light settings can affect the length of time before battery recharge is necessary.  
Brightness: allows you to adjust the display brightness for the LCD to see it better in different  
lighting conditions. Press the Left or Right Navigation keys to adjust the brightness. Press the  
Save soft key or the  
Backlight Time allows you to select the amount of time for the keypad backlight to remain on  
and the length of time for the display backlight to remain dim after the keypad times out.  
Highlight the On field and press the key. Then select from 10 Seconds, 30 Seconds, 1  
Minute, 3 Minutes, or 10 Minutes for the keypad backlight to remain on. Highlight Dim and  
key to confirm your selection.  
:
press the  
press OK or the  
key. Choose from Off, 5 Seconds, 30 Seconds, 1 Minute, or 3 Minutes and  
key for the length of time the display remains dim after the keypad  
backlight times out. Press the Save soft key to save your changes.  
Changing Your Settings  
95  
 
• Dialing Display  
:
allows you to select the properties of those items which are part of the  
Press the Left or Right Navigation keys to make  
display such as:  
Font Type: allows you to select the font to display  
your selection. Choose from Normal 1 or Normal 2. Press the Save soft key or the  
to confirm your selection.  
.
key  
Font Size: allows you to select a size for the selected font. Press the Left or Right Navigation keys  
to make your selection. Choose from Large Medium, or Small. Press the Save soft key or  
the key to confirm your selection.  
Font Color: allows you to select a color for the selected font. Press the Left or Right Navigation  
keys to make your selection. Choose from Monochrome Gradation, or Basic. Press the  
,
,
Down Navigation key and select a color choice. Press the Save soft key or the  
key to confirm  
your selection.  
Background Color: allows you to select a color for the background screen. Press the Left or  
Right Navigation keys to make your selection. Press the Save soft key or the  
key to confirm  
your selection.  
• Eco Mode: allows you to set your display to Backlight duration of 10 sec and LCD  
brightness level of 2. These are the most power efficient settings.  
96  
Time and Date  
By default, your device receives time and date information from the wireless  
network. The Time and Date menu allows you to modify the formatting for the time  
and date:  
1. In Idle mode, select Menu  
2. In the Time Format, choose 12 Hours or 24 Hours formatting.  
3. In the Date Format,choose from the following formats: MM/DD/YYYY  
YYYY YYYY/MM/DD, or YYYY/DD/MM  
Settings  
Time and Date.  
,
DD/MM/  
,
.
When you are outside network coverage, you may want to set time and date  
information manually.  
1. In Idle mode, select Menu  
Settings  
Time and Date  
Time Zone Updating  
and press the Left or Right Navigation key to select from one of the following:  
Manual only: you need to manually set the time and date according to the current time  
zone using the Time field.  
Automatic: the phone automatically updates the time and date according to the current  
time zone using the network service.  
2. Highlight the Time Zone field and press  
.
Important!: Current time zones are based upon Greenwich Mean Time.  
3. Use the Left or Right Navigation key to locate a time-zone. A corresponding  
area of the world map displays.  
4. Highlight the Daylight saving checkbox and press  
applies, then press OK  
if Daylight Saving time  
.
Note: The Time Zone field does not display when Time Zone Updating is set to Automatic  
.
Changing Your Settings  
97  
   
5. Select the Time field and enter the time in the following format: HH:MM.  
6. Select the Date field and enter the date in the following format: MM/DD/YYYY.  
7. Select the Time Format field and press the Left or Right Navigation key to  
select the 12 Hours or 24 Hours format.  
8. Highlight the Date Format field and enter the date in the following format:  
MM/DD/YYYY, DD/MM/YYYY, YYYY/MM/DD, or YYYY/DD/MM.  
9. Press Save to save your settings.  
Phone Settings  
You can customize various phone settings.  
In Idle mode, select Menu  
Settings  
Phone.  
Language  
This menu allows you to select a display language for Text language and Text Input  
mode. Choose from Automatic, English, Français, and Español.  
1. In Idle mode, select Menu  
Settings  
Phone  
Language.  
2. Highlight Screen text and press  
.
3. Highlight one of the following selections and press OK  
:
• Automatic (uses the language set on your SIM card).  
• English  
• Español  
4. Highlight the Input Language field and press  
.
5. Highlight one of the following selections and press OK  
:
• English  
• Español  
6. Press Save to save your settings and return to Phone settings page.  
98  
 
Shortcuts  
The Shortcuts option allows you to change the applications assigned to your  
Navigation keys.  
1. In Idle mode, select Menu  
Settings  
Phone  
Shortcuts.  
2. Use the Navigation keys to select the Up, Down, Right, or Left key.  
3. Press the Options Change. Highlight a new application to assign to the  
previously selected key.  
4. Press the Save soft key or the  
key to assign the new application.  
5. Follow the above steps for all four Navigation keys.  
QWERTY Slide Setting  
This setting allows you to choose what displays on the main screen when you slide  
open your phone (Landscape mode).  
1. In Idle mode, select Menu  
Settings  
Phone  
QWERTY Slide Setting.  
2. Select one of the following options:  
• Off: when you slide the phone open, there will be no change in what is displayed in  
Landscape mode.  
• Create New Message: when you slide the phone open, the Create message screen is  
displayed.  
• Email: when you slide the phone open, the Email screen is displayed so you can send  
an Email.  
3. Press Select or press the  
key. The setting will automatically be saved.  
Changing Your Settings  
99  
Auto Key Lock  
The Auto Keypad Lock feature locks your phone when the Backlight turns off. To  
modify this feature, follow these steps:  
1. In Idle mode, select Menu  
2. Highlight On or Off and press the  
For more information on Backlight settings, see “Display” on page 95.  
Own Number  
Settings  
Phone  
Auto Key Lock.  
key.  
The Own Number option displays the number assigned to the SIM card in your  
phone. You can change the number, but entering another number may prevent you  
from making or receiving calls on the handset. You may also add other names and  
numbers into your phone for easy referral.  
1. In Idle mode, select Menu  
2. Your phone number is displayed.  
Security  
Settings  
Phone  
Own Number.  
The Security feature enables you to restrict the use of your phone by the others and  
to restrict the types of calls. Various codes and passwords are used to protect the  
features of your phone.  
1. In Idle mode, select Menu  
Settings  
Phone  
Security.  
The following options are available:  
100  
Lock Phone  
When the Lock Phone feature is enabled, the phone is locked and you must enter  
the 4- to 8-digit phone password each time the phone is powered on.  
Note: You are prompted to create a password the first time this feature is enabled.  
To change the phone password, see “This option allows you to change your current  
phone password to a new one. Once you enter a new password, you are asked to  
confirm it by entering it again.” on page 103. Once you enter the correct password,  
you can use the phone until you switch it off. The following options are available:  
Off: you are not asked to enter the phone password when you switch on the phone.  
On: you are required to enter the phone password when you switch on the phone.  
Check PIN Code  
When the Check PIN Code feature is enabled, you must enter your PIN each time you  
switch on the phone with the SIM Card. Consequently, any person who does not have your  
PIN cannot use your SIM without your approval.  
The following options are available:  
Off: the phone connects directly to the network when you switch  
it on.  
On: you must enter the PIN each time the phone is switched on.  
Note: Before disabling the Check PIN Code feature, you must enter your PIN. You can obtain your  
PIN from your service provider’s customer service representative.  
Changing Your Settings  
101  
Lock Applications  
Using this option you can lock various applications. Once you lock the contents, you  
must enter the phone’s password to access the associated menus.  
Note: The first time you access the password screen, you are prompted to create a password.  
The applications options are:  
All  
Messages  
Email  
Exchange Email  
Recent Calls  
My Folder  
Calendar  
Tasks  
Memo  
Contacts  
Set FDN Mode  
FDN (Fixed Dial Number) mode, if supported by your SIM card, allows you to restrict  
the outgoing calls to a limited set of phone numbers. The following options are  
available:  
On: you can only call phone numbers stored in the FDN contacts list. You must enter your  
PIN2. The following options for entering FDN contacts are available through the Address  
Book:  
Full length entries or wild cards can be entered in to the FDN list.  
A full length number with a specific contact name can be entered into the FDN list.  
Wildcard entries allow you to dial a range of number with a single entry: ex. 555 – All  
dialed numbers that begin with 555 are allowed. Numbers that do not match the  
conditions in the FDN list are restricted.  
102  
Off: you can call any number.  
Note: Entering an asterisk (*) is not required for wild card entries.  
Change Phone Password  
This option allows you to change your current phone password to a new one. Once  
you enter a new password, you are asked to confirm it by entering it again.  
Change PIN Code  
This option allows you to change your current PIN, provided that the PIN Check  
feature is enabled. You must enter the current PIN before you can specify a new  
one. Once you enter a new PIN, you are asked to confirm it by entering it again.  
Change PIN2 Code  
The Change PIN2 option allows you to change your current PIN2 to a new one. You  
must enter the current PIN2 before you can specify a new one. Once you enter a  
new PIN2, you are asked to confirm it by entering it again.  
Note: If your SIM card does not require a PIN2 password, this menu does not display.  
Reset Phone  
You can easily reset your phone to its default settings. To reset your phone:  
1. In Idle mode, select Menu  
Settings  
Phone  
Reset Phone.  
2. At the All Settings reset to factory defaults. Continue? prompt, press Yes to  
reset, or No to cancel.  
3. Enter your phone password, and press the Confirm soft key.  
4. After the phone settings are reset, the Reset Phone done confirmation  
displays.  
Once your phone has been reset to its default settings for those selected  
options, it will restart itself in order to incorporate the new settings.  
Changing Your Settings  
103  
 
Note: User Data such as contacts, messages, pictures, videos, and music is not deleted.  
Restore Phone  
The Restore Phone option is the same as the Reset Phone option described above in  
that all settings are reset to factory defaults. However, with the Restore Phone  
option, all user data deletes.  
Warning!: All User Data such as contacts, messages, pictures, videos, and music is deleted.  
Ensure that you remove your microSD card if applicable because it will erase during the  
Restore Phone option.  
Warning!: When performing the Restore Phone option, do not remove your battery until the phone  
completes the task and restarts, otherwise phone damage may occur.  
Airplane Mode  
Airplane Mode allows you to use many of your phone’s features, such as Games,  
Voice notes, and more, when you are in an airplane or in any other area where  
making or receiving calls or data transmission is prohibited. When your phone is in  
Airplane Mode, it cannot send or receive any calls or access online information.  
When active, the (  
1. In Idle mode, select Menu  
2. Select On or Off and press Save or the  
) icon displays in place of the signal strength indicator.  
Settings Phone Airplane mode  
key.  
.
104  
Calls Settings  
In Idle mode, select Menu  
Settings  
Calls.  
Adjusting the General Call Settings  
1. Press General and select from the following options:  
• Show My Number: allows you to show or hide your number on the caller display of the  
phones you call. Select Set by network, Show number, or Hide number.  
• Call Answer: selects how your phone answers incoming calls. Selections are: Send Key  
and Any Key.  
• Auto Reply: allows you to send an auto reply text message to a missed call number when  
this setting is activated. Set to On and enter a reply that you want to send.  
• Call Status Tones: allows you to activate an alert tone for one of two available status  
categories. Press an option to make your selection and then press Options  
store your new selection. Options include:  
Save to  
Call Connect Tone: allows you to activate an alert tone which sounds every time a call is  
connected.  
Minute Minder: allows you to activate an alert tone which sounds every minute the call is  
active.  
• Alerts on Call: activates an alert tone for new messages being received during an active  
call. Press Save to store setting.  
2. Press  
twice return to the previous Settings page.  
Changing Your Settings  
105  
 
Adjusting the Voice Call Settings  
1. Select Voice Call and choose from the following options:  
• Call Waiting: this network service informs you when someone is trying to reach you  
during another call. You can specify individual call waiting options for voice calls and/or  
data calls.  
Press Options and select one of the following options: Activate  
,
Deactivate, or Check status  
(checks the status of this service on your account).  
• Auto Redial: the phone automatically redials the last active number if the call was either  
cut off or you were unable to connect.  
Press either On or Off to activate/deactivate the function.  
Press Save to store the new setting.  
2. Press  
twice return to the previous Phone settings page.  
106  
Connectivity  
You can edit several of the communication/connection parameters on this phone.  
In Idle mode, select Menu  
Settings  
Connectivity.  
Bluetooth  
Bluetooth is a short-range wireless communications technology capable of  
exchanging information over a distance of about 30 feet without requiring a physical  
connection. Unlike infrared, you don't need to line up the devices to beam  
information with Bluetooth. If the devices are within connectivity range of one  
another, you can exchange information between them, even if they are located in  
different rooms.  
The Bluetooth wireless technology settings menu provides the ability to view and  
change the device name, show the visibility, and set the security for the device.  
Bluetooth Activation  
To use the Bluetooth option you must first activate it. When the Bluetooth is  
deactivated, you cannot send or receive information via Bluetooth. To save battery  
life or in situations where Bluetooth use is prohibited, you can turn off the Bluetooth  
wireless technology headset.  
1. In Idle mode, press Menu Settings Connectivity  
Bluetooth.  
2. If the first item in the Bluetooth menu is Bluetooth:Off, highlight the  
Bluetooth:Off option press the Select soft key or the  
key.  
The Bluetooth activated confirmation prompt displays on your phone.  
Note: If the first item in the Bluetooth menu is Bluetooth:On, then Bluetooth is already activated.  
Changing Your Settings  
107  
 
Discoverable  
The Discoverable option allows your phone to wirelessly transmit its phone name  
and status to every device within its range. This transmission can pose a security  
risk and incite unauthorized connection to your phone. It is recommended that you  
remain hidden unless necessary.  
1. In Idle mode, press Menu Settings ConnectivityBluetooth.  
2. If the second item in the Bluetooth menu is Discoverable:Off, then highlight  
the Discoverable:Off option and press the Select soft key or the  
key.  
The confirmation prompt displays: Bluetooth is currently switched off. Switch  
on: Yes or No. Make your selection.  
Note: If the second item in the Bluetooth menu is Discoverable:On, then Bluetooth is already  
discoverable.  
My Devices  
The My Devices option provides a list of Bluetooth wireless technology devices  
discovered by your handset.  
1. In Idle mode, press Menu Settings ConnectivityBluetooth ➔  
My Devices.  
2. Highlight Search New Device and press the Select soft key or the  
key.  
– or –  
Highlight a device and press the Select soft key or the  
key.  
108  
3. Enter the passkey (if applicable).  
If connecting to a Bluetooth wireless device, consult your Bluetooth device  
user manual for your assigned PIN.  
If connecting to another handset, enter the same user-defined PIN on both  
handsets.  
If the device allows Auto pairing, it will attempt to pair with the device  
automatically.  
4. Highlight the Connection Options field and use the Left or Right Navigation key  
to select Automatic (reconnects automatically), or Always Ask (asks before  
reconnecting) and press the Pair soft key.  
Note: The first time you try to pair with a handset, you and the owner of the other handset must  
enter the same Passkey. Once the handsets are paired, you do not need to use the Passkey  
again.  
5. If you are unable to pair with the device a popup displays on the screen.  
Press the Yes soft key to retry.  
Changing Your Settings  
109  
My Bluetooth Info  
The My Bluetooth Info feature allows your phone to identify itself using the name,  
the Device Address and Hardware and Software Version, entered into the fields  
when your phone’s Bluetooth visibility is turned On. The information is altered by  
selecting the pre-existing text and replacing it with a new string.  
1. In Idle mode, press Menu Settings Connectivity  
Bluetooth My Bluetooth Info.  
2. Press the  
key to erase the previous Device Name.  
Note: The default input entry method is Abc, where the initial character is Uppercase and each  
consecutive character in that same word is left as lowercase text.  
3. When finished, press  
or press Options  
Save.  
Search for New Device  
This option allows you to search for new Bluetooth devices.  
1. In Idle mode, press Menu Settings Connectivity Bluetooth ➔  
Search for New Device. The phone searches for available devices.  
2. Highlight a device and press the Select soft key or the  
key.  
3. Enter the passkey.  
4. Select a connection option and press the Pair soft key.  
If the device allows Auto pairing, it will attempt to pair with the device  
automatically.  
110  
Configuring Your Phone’s USB Settings  
This menu selects the method of communication for the USB port.  
Note: Disable the Bluetooth feature before initiating a USB connection with the phone. Prior to  
connecting the USB cable to the phone, install the latest version of the PC Studio application.  
This application installs the necessary USB drivers onto your machine. For a free download  
of PC Studio, go to www.samsung.com/us/support.  
1. In Idle mode, select Menu  
2. Select one of the following USB modes:  
• Ask on Connection: causes the phone to present a “Select USB Mode” pop-up when you  
Settings  
Connectivity  
Select USB mode.  
connect to the PC. You can choose from either: Samsung PC Studio Media Player, or  
,
Mass Storage  
.
• Samsung PC Studio: sets Samsung PC Studio to launch as the default application when  
a USB connection is detected.  
• Media Player: sets the Media Player to launch as the default application when a USB  
connection is detected.  
• Mass Storage: allows you to utilize the onboard storage capacity of the phone’s microSD  
card to store and upload files. This option allows your computer to detect the phone’s  
microSD card as a removable storage drive.  
3. Press Save  
.
Changing Your Settings  
111  
 
Applications Settings  
The Applications Settings feature allows you to configure the functional parameters  
for most of the onboard applications. These applications are described in more  
detail within other sections of this manual.  
1. In Idle mode, select Menu  
2. Select the type of application which you want to change:  
• Messaging Settings (see page 43)  
• Browser Settings (see page 112)  
• Music Settings (see page 113)  
• Record Audio Settings (see page 113)  
• Calendar Settings (see page 114)  
• Contact Settings (see page 46).  
Browser Settings  
These browser settings are for your onboard browser.  
1. In Idle mode, select Menu  
Settings  
2. Select one of the following options:  
Settings Applications Settings  
Browser  
.
• Clear Caches: deletes the information stored in the cache. The cache stores the most  
recently accessed web pages.  
• Cookies  
:
Empty Cookies: deletes cookies. Cookies are pieces of personal information sent to a web  
server while navigating the web.  
Cookie Options: sets whether cookies are stored on your phone (Accept All or Reject All). If you  
select Prompt, the phone will ask you to save the cookies on every page requiring cookies.  
112  
   
• Preferences: allows you to run JavaScript, display images, play sound, or run Flash.  
Uncheck these items to speed up web-viewing on your phone.  
• About Browser: displays the access version and copyright information about the browser.  
Music Settings  
To configure your Music player settings, use the following steps:  
1. In Idle mode, select Menu Settings Applications Settings  
Music Settings  
2. Select one of the following options:  
.
Background Playing: allows you to set whether or not you can listen to music while  
working in other applications.  
Sound Effects: allows you to set the Equalizer to Normal, Rock, Pop, Dance, Classic,  
Jazz, Wide, Dynamic, or Surround. This is the equivalent of an equalizer.  
3. After making any changes, press the Save soft key.  
Record Audio Settings  
To configure the maximum length for a recording:  
1. In Idle mode, select Menu  
Audio Settings  
Settings Applications Settings  
Record  
.
2. Use the Left or Right navigation keys to choose the maximum limit allowed for  
the recorded audio file (1 min, 2 min, 3 min, 4 min, 5 min, 60, min, or Limit  
for MMS).  
3. Press Save  
.
Changing Your Settings  
113  
   
Calendar Settings  
To configure the starting day and view used when opening the Calendar application:  
1. In Idle mode, select Menu  
Settings  
2. Press either of the following fields and edit the information:  
Settings Applications Settings  
Calendar  
.
Starting Day: allows you choose which day marks the first day in your calendar week  
(Sunday or Monday).  
View By: allows you to choose the default view for appointments used by the Calendar  
application when launched (Month, Week, or Day).  
3. Press  
to save.  
Contacts Settings  
For information on Contacts Settings, see see “Contacts Settings” on page 46.  
Memory Management  
You can easily check the amount of memory being used for storing data, such as  
messages, media, calendar data, or contacts entries. You can also delete any  
selected information from your phone:  
1. In Idle mode, select Menu  
2. Press any of the following options:  
Clear Memory  
• Used Space  
Settings  
Memory Management.  
114  
   
Clear Memory  
From this menu you can clear the memory for Messages, Email, Exchange Email,  
My Folder, Calendar entries, Tasks, Memos, or Contacts. You can all select All to  
clear everything listed.  
1. In Idle mode, select Menu  
Memory  
Settings  
Memory Management  
Clear  
.
2. Press Check to place a checkmark alongside those applications you wish to  
clear.  
– or –  
Check All to clear all the memory settings.  
3. Press OK  
4. Enter the user-defined password and press Confirm to clear the memory  
settings. For more information, refer to “Change Phone Password” on  
page 103.  
– or –  
Press Back to cancel.  
Changing Your Settings  
115  
Check the Used Space  
1. In Idle mode, select Menu  
Space.  
Settings  
Memory Management Used  
2. Select one of the following storage categories to view the contents of a  
category’s memory:  
• Shared Memory  
• Messaging  
• My Folder  
• Calendar  
Tasks  
• Memo  
• Contacts  
3. Press  
to return to the Idle screen.  
116  
Section 11: Camera  
This section explains how to use the camera on your phone. You can take  
photographs and shoot video by using the built-in camera functionality. Your 2.0  
megapixel camera produces photos in JPEG format.  
Important!: Do not take photos of people without their permission.  
Do not take photos in places where cameras are not allowed.  
Do not take photos in places where you may interfere with another person’s privacy.  
Using the Camera  
Taking Photos  
Taking pictures with your device’s built-in camera is as simple as choosing a  
subject, pointing the camera, then pressing the camera key.  
Note: When taking a photo in direct sunlight or in bright conditions, shadows may display on the  
photo.  
1. In Idle mode, press the Camera key  
to activate the camera mode.  
2. Using the phone’s main display screen as a viewfinder, adjust the image by  
aiming the camera at the subject.  
Note: There are two numbers displayed in the lower-left portion of the screen, 3/997 for example.  
The first number is the number of pictures you have taken and the second number is the  
approximate number of total pictures you can take at the current image size.  
3. Press Options before taking the photo to access various camera options.  
Camera  
117  
     
4. Press the Camera key  
until the shutter sounds. The picture  
automatically stores within your designated storage location. If no microSD is  
installed, all pictures are stored on the Phone.  
5. Press  
to return to Idle mode.  
Camera Options  
Options are represented by icons across the top of the screen when you press the  
Options soft key.  
Camera/Camcorder: allows you to change between various modes. Once you change the  
mode, the corresponding indicator displays at the top left of the display. Choose from  
Camera or Camcorder.  
Shooting mode: allows you to set the shooting mode. Options are:  
Single: takes a single photo and view it before returning to the shooting mode.  
Continuous: takes a succession of consecutive photos.  
Panorama: takes a landscape photo by taking an initial photo and then adding additional  
images to itself. The guide box lets you view the area where the second part of the  
panoramic picture should fall within by highlighting the box in orange. If you move the  
camera icon to the center of the box on the display, the box turns orange and the picture is  
automatically taken. Repeat this step for up to 6 segments. When you are done, press the  
Camera key.  
Smile shot: takes the picture when the subject smiles.  
Mosaic: takes multiple photos and then groups them together into a single final photo.  
Frame: allows you to choose a custom frame border for your image. Choose from one of the  
20 available frames. Press OK to assign the frame.  
Night Mode: allows you to take better pictures at night. Select On or Off.  
Camera Resolution: allows you to set the image size: 2M(1600x1200), 1.3M(1280x960),  
0.3M(640x480), or 320x240.  
118  
 
White Balance: allows you to set this option from the following choices: Auto,  
Daylight, Incandescent, Fluorescent, or Cloudy.  
Metering: allows you to set how the camera measures or meters the light source: Matrix,  
Center-weighted, or Spot.  
Effects: allows you to change the color tone or apply special effects to the photo or  
video. Options include: None, Black and white, Sepia, Negative, or Watercolor.  
Settings: allows you to customize your camera settings. Choose from the following options:  
Settings: Photo tab  
Quality: allows you to set the image quality to: Economy, Fine, or Superfine.  
GPS: allows you to turn GPS On or Off (also known as Geotagging). The location of where the  
picture is taken is attached to the picture. This option is only available in Camera mode. The  
following GPS icons display the GPS status:  
Settings: Setup tab  
Review screen: allows you to review a photo after taking it.  
Shutter sound: allows you to select a tone to play when the camera’s shutter opens and  
closes. Sound selections are Shutter 1 or None.  
Default storage: allows you to configure the default storage location for images/videos as  
either Phone or Memory Card (if inserted).  
Shortcuts: allows you to see the shortcuts available for several of the settings. 1=Mode,  
2=Shooting mode, 3=Timer, #=Viewfinder mode.  
Camera  
119  
Pictures/Videos Folder Options  
After you have taken a photo or shot a video, you can access various options:  
Press Options and select one of the following:  
Take another/Record another: allows you to take another photo or record another  
video.  
• Play: allows you to play the video (this option only appears in camcorder).  
• Send via: allows you to send the photo or video via Message, Email, Exchange Email, or  
via Bluetooth.  
• Print via: allows you to print the picture using Bluetooth (this option only appears in  
Camera).  
• Delete: allows you to delete the picture or video.  
• Set as: allows you to set the photo as Wallpaper or Caller ID (this option only appears in  
Camera).  
• Edit: allows you to edit the picture (this option only appears in Camera).  
• Rotate: rotates the photo in 90 degree increments (this option only appears in Camera).  
• Slide Show: allows you to see a slide show of the recent pictures you have taken.  
• Properties: displays properties of the picture or video, including Name, Format,  
Resolution, Size, Forwarding, Date Created, and Location.  
Accessing the Picture Folder  
My Folder  
1. Press Menu  
Pictures  
.
2. Highlight a photo and press  
to open it in the viewer.  
Editing a Photo  
For information on editing a photo, see “Editing a Photo” on page 120.  
120  
 
Assigning an Image to a Contacts Entry  
My Folder Pictures  
Set as Caller ID  
1. Press Menu  
<image>.  
2. Press Options  
.
3. Press Search contact, highlight an entry and press  
Press Create contact to create a new Address Book entry with the image  
already assigned to the new contact. For more information, refer to “Contacts  
Settings” on page 46.  
Assigning an Image as a Wallpaper  
1. Press Menu  
My Folder  
Pictures  
<image>.  
2. Press Options  
Set as  
Wallpaper.  
The wallpaper appears as a preview.  
3. Press Select to set the wallpaper.  
Camera  
121  
Using the Camcorder  
In addition to taking photos, the camera also doubles as a camcorder allowing you  
to also record, view, and send videos.  
Shooting Video  
Tip: When shooting video in direct sunlight or in bright conditions, it is recommended that you  
provide your subject with sufficient light by having the light source behind you.  
1. In Idle mode, press the Camera key  
to activate the camera mode.  
2. Press Options, then Highlight Camcorder and press  
.
3. Using the phone’s main display screen as a viewfinder, adjust the image by  
aiming the camcorder at the subject.  
4. Press the Camera key  
5. Press Stop or the Camera key to stop recording and save the video file.  
6. Once the file saves, press Options Play to review the video.  
7. Press to return to Idle mode.  
again to record a video.  
122  
 
Camcorder Options  
Options are represented by icons across the top of the screen when you press the  
Options key.  
Camera/Camcorder: allows you to change between various modes. Once you change the  
mode, the corresponding indicator displays at the top left of the display. Choose from  
Camera or Camcorder.  
Recording Mode: select a video recording mode. Select Normal to record a video within the  
limit of the currently available memory. Select Limit for MMS to record a video suitable for  
an MMS message.  
Camcorder Resolution: allows you to set the video size to 176x144 or 320x240 (if  
in Normal Recording Mode).  
White Balance: allows you to set this option from the following choices: Auto,  
Daylight, Incandescent, Fluorescent, or Cloudy.  
Metering: allows you to set how the camcorder measures or meters the light source: Matrix,  
Center-weighted, or Spot.  
Effects: allows you to change the color tone or apply special effects to the photo or  
video. Options include: None, Black and white, Sepia, Negative, or Watercolor.  
Settings: allows you to customize your camera settings. Choose from the following options:  
Settings: Video tab  
Quality: allows you to set the image quality to: Economy, Normal, or Fine.  
Audio recording: allows you to turn the audio on your video On or Off.  
Settings: Setup tab  
Review screen: allows you to review a video after taking it.  
Default storage allows you to configure the default storage location for images/videos as  
:
either Phone or Memory Card (if inserted).  
Shortcuts: allows you to see the shortcuts available for several of the settings. 1=Mode,  
2=Shooting mode, 3=Timer, #=Viewfinder mode.  
Camera  
123  
 
Accessing the Video Folder  
My Folder  
1. Press Menu  
Video.  
2. Highlight the On phone or On card tab (wherever the video resides) and select  
a video from the list.  
3. Press to  
view the video.  
– or –  
Before you play the video press Options and select one of the following:  
• Play: plays the selected video file.  
• Send via: allows you to send the video via Multimedia Message, Email, Exchange Email,  
or via Bluetooth.  
• Delete: allows you to delete the Selected video or Multiple videos.  
• Rename: allows you to rename the video file.  
• Move: allows you to choose the Selected or Multiple videos to move.  
• Copy: allows you to copy a selected or multiple videos.  
• Record Video: allows you to record another video.  
• Create Folder: creates a new My Folder on either the Phone or Memory Card.  
• More: displays the following additional options:  
Lock/Unlock: allows you to lock and unlock the video.  
Bluetooth Visibility: allows you to make the image file visible to a Bluetooth device.  
Sort by: allows you to sort your videos by Date, Type, Name, or Size.  
Properties: allows you to see the details of your video including Name, Format, Resolution, Size,  
Forwarding capability, Date created, and physical Location.  
124  
Section 12: Health and Safety Information  
This section outlines the safety precautions associated with using your phone.  
The terms “mobile device” or “cell phone” are used in this section to refer to  
your phone. Read this information before using your mobile device  
.
Exposure to Radio Frequency (RF) Signals  
The U.S. Food and Drug Administration (FDA) has published information for  
consumers relating to Radio Frequency (RF) exposure from wireless phones.  
The FDA publication includes the following information:  
Do cell phones pose a health hazard?  
Many people are concerned that cell phone radiation will cause cancer or other  
serious health hazards. The weight of scientific evidence has not linked cell phones  
with any health problems.  
Cell phones emit low levels of Radio Frequency (RF) energy. Over the past 15 years,  
scientists have conducted hundreds of studies looking at the biological effects of  
the radio frequency energy emitted by cell phones. While some researchers have  
reported biological changes associated with RF energy, these studies have failed to  
be replicated. The majority of studies published have failed to show an association  
between exposure to radio frequency from a cell phone and health problems.  
The low levels of RF cell phones emit while in use are in the microwave frequency  
range. They also emit RF at substantially reduced time intervals when in the stand-  
by mode. Whereas high levels of RF can produce health effects (by heating tissue),  
exposure to low level RF that does not produce heating effects causes no known  
adverse health effects.  
The biological effects of radio frequency energy should not be confused with the  
effects from other types of electromagnetic energy.  
Health and Safety Information  
125  
     
Very high levels of electromagnetic energy, such as is found in X-rays and  
gamma rays, can ionize biological tissues. Ionization is a process where  
electrons are stripped away from their normal locations in atoms and molecules.  
It can permanently damage biological tissues including DNA, the genetic material.  
The energy levels associated with radio frequency energy, including both radio  
waves and microwaves, are not great enough to cause ionization of atoms and  
molecules. Therefore, RF energy is a type of non-ionizing radiation. Other types of  
non-ionizing radiation include visible light, infrared radiation (heat), and other forms  
of electromagnetic radiation with relatively low frequencies.  
While RF energy does not ionize particles, large amounts can increase body  
temperatures and cause tissue damage. Two areas of the body, the eyes and the  
testes, are particularly vulnerable to RF heating because there is relatively little  
blood flow in them to carry away excess heat.  
Research Results to Date: Is there a connection between  
RF and certain health problems?  
The results of most studies conducted to date say no. In addition, attempts to  
replicate and confirm the few studies that have shown a connection have failed.  
The scientific community at large therefore believes that the weight of scientific  
evidence does not show an association between exposure to Radio Frequency (RF)  
from cell phones and adverse health outcomes. Still the scientific community has  
supported additional research to address gaps in knowledge. Some of these studies  
are described below.  
Interphone Study  
Interphone is a large international study designed to determine whether cell phones  
increase the risk of head and neck cancer. A report published in the International  
Journal of Epidemiology (June, 2010) compared cell phone usage for more than  
5,000 people with brain tumors (glioma and meningioma) and a similar number of  
healthy controls.  
126  
Results of this study did NOT show that cell phones caused brain cancer. In this  
study, most people had no increased risk of brain cancer from using cell phones.  
For people with the heaviest use of cell phones (an average of more than ½ hour per  
day, every day, for over 10 years) the study suggested a slight increase in brain  
cancer. However, the authors determined that biases and errors prevented any  
conclusions being drawn from this data. Additional information about Interphone  
Interphone is the largest cell phone study to date, but it did not answer all questions  
about cell phone safety. Additional research is being conducted around the world,  
and the FDA continues to monitor developments in this field.  
International Cohort Study on Mobile Phone Users (COSMOS)  
The COSMOS study aims to conduct long-term health monitoring of a large group of  
people to determine if there are any health issues linked to long-term exposure to  
radio frequency energy from cell phone use. The COSMOS study will follow  
approximately 300,000 adult cell phone users in Europe for 20 to 30 years.  
Additional information about the COSMOS study can be found at  
.
Risk of Brain Cancer from Exposure to Radio Frequency Fields in Childhood and  
Adolescence (MOBI-KIDS)  
MOBI-KIDS is an international study investigating the relationship between exposure  
to radio frequency energy from communication technologies including cell phones  
and brain cancer in young people. This is an international multi-center study  
involving 14 European and non-European countries. Additional information about  
MOBI-KIDS can be found at  
Health and Safety Information  
127  
Surveillance, Epidemiology, and End Results (SEER) Program of the National  
Cancer Institute  
States to detect any change in rates of new cases for brain cancer. If cell phones  
use has been common for quite some time in the U.S. Between 1987 and 2005, the  
overall age-adjusted incidence of brain cancer did not increase. Additional  
information about SEER can be found at http://seer.cancer.gov/  
.
Cell Phone Industry Actions  
Although the existing scientific data do not justify FDA regulatory actions, the FDA  
has urged the cell phone industry to take a number of steps, including the following:  
Support-needed research on possible biological effects of RF for the type of signal emitted  
by cell phones;  
Design cell phones in a way that minimizes any RF exposure to the user; and  
Cooperate in providing users of cell phones with the current information on cell phone use  
and human health concerns.  
The FDA also is working with voluntary standard-setting bodies such as the Institute  
of Electrical and Electronics Engineers (IEEE), the International Commission on Non-  
Ionizing Radiation Protection (ICNIRP), and others to assure that safety standards  
continue to adequately protect the public.  
Reducing Exposure: Hands-Free Kits and Other Accessories  
Steps to Reduce Exposure to Radio Frequency Energy  
If there is a risk from being exposed to radio frequency energy (RF) from  
cell phones - and at this point we do not know that there is - it is probably  
very small. But, if you are concerned about avoiding even potential risks, you  
can take a few simple steps to minimize your RF exposure.  
Reduce the amount of time spent using your cell phone;  
Use speaker mode or a headset to place more distance between your head and  
the cell phone.  
128  
Hands-Free Kits  
Hands-free kits may include audio or Bluetooth® headsets and various types of  
body-worn accessories such as belt-clips and holsters. Combinations of these can  
be used to reduce RF energy absorption from cell phones.  
Headsets can substantially reduce exposure because the phone is held away from  
the head in the user's hand or in approved body-worn accessories. Cell phones  
marketed in the U.S. are required to meet RF exposure compliance requirements  
when used against the head and against the body.  
Because there are no known risks from exposure to RF emissions from cell phones,  
there is no reason to believe that hands-free kits reduce risks. Hands-free kits can  
be used for convenience and comfort. They are also required by law in many states  
if you want to use your phone while driving.  
Cell Phone Accessories that Claim to Shield the Head from  
RF Radiation  
Because there are no known risks from exposure to RF emissions from cell phones,  
there is no reason to believe that accessories which claim to shield the head from  
those emissions reduce risks. Some products that claim to shield the user from RF  
absorption use special phone cases, while others involve nothing more than a  
metallic accessory attached to the phone. Studies have shown that these products  
generally do not work as advertised. Unlike “hands-free” kits, these so-called  
“shields” may interfere with proper operation of the phone. The phone may be  
forced to boost its power to compensate, leading to an increase in RF absorption.  
Children and Cell Phones  
The scientific evidence does not show a danger to any users of cell phones from RF  
exposure, including children and teenagers. The steps adults can take to reduce RF  
exposure apply to children and teenagers as well.  
Reduce the amount of time spent on the cell phone;  
Use speaker mode or a headset to place more distance between the head and the cell  
phone.  
Health and Safety Information  
129  
Some groups sponsored by other national governments have advised that children  
be discouraged from using cell phones at all. For example, The Stewart Report from  
the United Kingdom made such a recommendation in December 2000. In this  
report, a group of independent experts noted that no evidence exists that using a  
cell phone causes brain tumors or other ill effects. Their recommendation to limit  
cell phone use by children was strictly precautionary; it was not based on scientific  
evidence that any health hazard exists.  
Additional information on the safety of RF exposures from various sources can be  
obtained from the following organizations (updated 10/1/2010):  
FCC RF Safety Program:  
Environmental Protection Agency (EPA):  
Occupational Safety and Health Administration (OSHA):  
(Note: This web address is case sensitive.)  
National Institute for Occupational Safety and Health (NIOSH):  
World Health Organization (WHO):  
International Commission on Non-Ionizing Radiation Protection:  
Health Protection Agency:  
US Food and Drug Administration:  
130  
Specific Absorption Rate (SAR) Certification Information  
Your wireless phone is a radio transmitter and receiver. It is designed and  
manufactured not to exceed the exposure limits for Radio Frequency (RF) energy set  
by the Federal Communications Commission (FCC) of the U.S. Government.  
These FCC RF exposure limits are derived from the recommendations of two expert  
organizations: the National Council on Radiation Protection and Measurement  
(NCRP) and the Institute of Electrical and Electronics Engineers (IEEE). In both cases,  
the recommendations were developed by scientific and engineering experts drawn  
from industry, government, and academia after extensive reviews of the scientific  
literature related to the biological effects of RF energy.  
The RF exposure limit set by the FCC for wireless mobile phones employs a unit of  
measurement known as the Specific Absorption Rate (SAR). The SAR is a measure  
of the rate of absorption of RF energy by the human body expressed in units of  
watts per kilogram (W/kg). The FCC requires wireless phones to comply with a  
safety limit of 1.6 watts per kilogram (1.6 W/kg).  
The FCC SAR limit incorporates a substantial margin of safety to give additional  
protection to the public and to account for any variations in measurements.  
SAR tests are conducted using standard operating positions accepted by the FCC  
with the phone transmitting at its highest certified power level in all tested  
frequency bands. Although the SAR is determined at the highest certified power  
level, the actual SAR level of the phone while operating can be well below the  
maximum reported value. This is because the phone is designed to operate at  
multiple power levels so as to use only the power required to reach the network. In  
general, the closer you are to a wireless base station antenna, the lower the power  
output of the phone.  
Before a new model phone is available for sale to the public, it must be tested and  
certified to the FCC that it does not exceed the SAR limit established by the FCC.  
Tests for each model phone are performed in positions and locations (e.g. at the ear  
and worn on the body) as required by the FCC. For body-worn operation, this phone  
Health and Safety Information  
131  
 
has been tested and meets FCC SAR guidelines when used with an accessory that  
contains no metal and that positions the mobile device a minimum of 1.5 cm from  
the body.  
Use of other accessories may not ensure compliance with FCC RF exposure  
guidelines. The FCC has granted an Equipment Authorization for this mobile phone  
with all reported SAR levels evaluated as in compliance with the FCC RF exposure  
guidelines.  
The maximum SAR values for this model phone as reported to the FCC is/are:  
Head: 1.00 W/Kg.  
Body-worn: 1.04 W/Kg.  
SAR information on this and other model phones can be accessed online on the  
FCC's website through http://transition.fcc.gov/oet/rfsafety/sar.html. To find  
information that pertains to a particular model phone, this site uses the phone  
FCC ID number which is usually printed somewhere on the case of the phone.  
Sometimes it may be necessary to remove the battery pack to find the number.  
Once you have the FCC ID number for a particular phone, follow the instructions on  
the website and it should provide values for typical or maximum SAR for a particular  
phone. Additional SAR information can also be obtained at http://www.fcc.gov/  
encyclopedia/specific-absorption-rate-sar-cellular-telephones  
.
FCC Part 15 Information to User  
Pursuant to part 15.21 of the FCC Rules, you are cautioned that changes or  
modifications not expressly approved by Samsung could void your authority to  
operate the device.  
This device complies with part 15 of the FCC Rules. Operation is subject to the  
following two conditions: (1) This device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that  
may cause undesired operation.  
Note: This equipment has been tested and found to comply with the limits for a  
132  
 
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are  
designed to provide reasonable protection against harmful interference in a  
residential installation. This equipment generates, uses and can radiate radio  
frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception, which  
can be determined by turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following measures:  
Reorient or relocate the receiving antenna.  
Increase the separation between the equipment and receiver.  
Connect the equipment into an outlet on a circuit different from that to which the receiver  
is connected.  
Consult the dealer or an experienced radio/TV technician for help.  
Health and Safety Information  
133  
Smart Practices While Driving  
On the Road - Off the Phone  
The primary responsibility of every driver is the safe operation of his or her vehicle.  
Responsible drivers understand that no secondary task should be performed while  
driving whether it be eating, drinking, talking to passengers, or talking on a mobile  
phone - unless the driver has assessed the driving conditions and is confident that  
the secondary task will not interfere with their primary responsibility. Do not engage  
in any activity while driving a moving vehicle which may cause you to take your eyes  
off the road or become so absorbed in the activity that your ability to concentrate on  
the act of driving becomes impaired. Samsung is committed to promoting  
responsible driving and giving drivers the tools they need to understand and  
address distractions.  
Check the laws and regulations on the use of mobile devices and their accessories in  
the areas where you drive. Always obey them. The use of these devices may be  
prohibited or restricted in certain areas. For example, only hands-free use may be  
permitted in certain areas.  
Before answering calls, consider your circumstances. Let the call go to voicemail  
when driving conditions require. Remember, driving comes first, not the call!  
If you consider a call necessary and appropriate, follow these tips:  
Use a hands-free device;  
Secure your phone within easy reach;  
Place calls when you are not moving;  
Plan calls when your car will be stationary;  
Do not engage in stressful or emotional conversations;  
Let the person with whom you are speaking know that you are driving and will suspend the  
call if necessary;  
Do not take notes or look up phone numbers while driving;  
134  
 
Notice regarding legal restrictions on mounting this device in an automobile:  
Laws in some states may prohibit mounting this device on or near the windshield of  
an automobile. In other states, the law may permit mounting this device only in  
specific locations in the automobile. Be sure to consult the state and local laws or  
ordinances where you drive before mounting this device in an automobile. Failure to  
comply with these restrictions could result in fines, penalties, or other damages.  
Never mount this device in a manner that will obstruct the driver's clear view of the  
street and traffic.  
Never use wireless data services such as text messaging, Web browsing, or e-mail  
while operating a vehicle.  
Never watch videos, such as a movie or clip, or play video games while operating  
a vehicle.  
For more information, go to http://www.ctia.org  
.
Battery Use and Safety  
Important!: Handle and store batteries properly to avoid injury or damage. Most battery issues arise  
from improper handling of batteries and, particularly, from the continued use of  
damaged batteries.  
Do not disassemble, crush, puncture, shred, or otherwise attempt to change the form  
of your battery. Do not put a high degree of pressure on the battery. This can cause  
leakage or an internal short-circuit, resulting in overheating.  
Do not let the phone or battery come in contact with liquids. Liquids can get into the  
phone's circuits, leading to corrosion. Even when the phone appears to be dry and appears  
to operate normally, the circuitry could slowly corrode and pose a safety hazard. If the  
phone and/or battery get wet, have them checked by your service provider or contact  
Samsung, even if they appear to be working properly.  
Health and Safety Information  
135  
 
Do not place your battery in or near a heat source. Excessive heating can damage the  
phone or the battery and could cause the phone or the battery to explode. Do not dry a wet  
or damp battery with an appliance or heat source such as a microwave oven, hair dryer,  
iron, or radiator. Avoid leaving your phone in your car in high temperatures.  
Do not dispose of the phone or the battery in a fire. The phone or the battery may  
explode when overheated.  
Do not handle a damaged or leaking battery. Do not let leaking battery fluid come in  
contact with your eyes, skin or clothing. For safe disposal options, contact your nearest  
Samsung-authorized service center.  
Avoid dropping the cell phone. Dropping the phone or the battery, especially on a hard  
surface, can potentially cause damage to the phone and battery. If you suspect damage to  
the phone or battery, take it to a service center for inspection.  
Never use any charger or battery that is damaged in any way.  
Do not allow the battery to touch metal objects. Accidental short-circuiting can occur  
when a metallic object (coin, key, jewelry, clip, or pen) causes a direct connection between  
the + and - terminals of the battery (metal strips on the battery), for example when you  
carry a spare battery in a pocket or bag. Short-circuiting the terminals may damage the  
battery or the object causing the short-circuiting.  
Important!: Use only Samsung-approved batteries, and recharge your battery only with Samsung-  
approved chargers which are specifically designed for your phone.  
Warning!: Use of a non-Samsung-approved battery or charger may present a risk of fire, explosion,  
leakage, or other hazard. Samsung's warranty does not cover damage to the phone  
caused by non-Samsung-approved batteries and/or chargers.  
136  
Do not use incompatible cell phone batteries and chargers. Some websites and  
second-hand dealers not associated with reputable manufacturers and carriers, might be  
selling incompatible or even counterfeit batteries and chargers. Consumers should  
purchase manufacturer or carrier-recommended products and accessories. If unsure about  
whether a replacement battery or charger is compatible, contact the manufacturer of the  
battery or charger.  
Misuse or use of incompatible phones, batteries, and charging devices could result in  
damage to the equipment and a possible risk of fire, explosion, or leakage, leading to  
serious injuries, damages to your phone, or other serious hazard  
.
Samsung Mobile Products and Recycling  
Samsung cares for the environment and encourages its customers to recycle  
Samsung mobile devices and genuine Samsung accessories.  
Proper disposal of your mobile device and its battery is not only important for safety,  
it benefits the environment. Batteries must be recycled or disposed of properly.  
Recycling programs for your mobile device, batteries, and accessories may not be  
available in your area.  
We've made it easy for you to recycle your old Samsung mobile device by working  
with respected take-back companies in every state in the country.  
Drop It Off  
You can drop off your Samsung-branded mobile device and batteries for recycling  
at one of our numerous Samsung Recycling Direct (SM) locations. A list of these  
.
Samsung-branded devices and batteries will be accepted at these locations for  
no fee.  
Health and Safety Information  
137  
 
Consumers may also recycle their used mobile device or batteries at many retail  
or carrier-provided locations where mobile devices and batteries are sold.  
Additional information regarding specific locations may be found at:  
.
Mail It In  
The Samsung Mobile Take-Back Program will provide Samsung customers with a  
free recycling mailing label. Just go to  
phone_page and follow the instructions to print out a free pre-paid postage label  
and then send your old mobile device or battery to the address listed, via U.S.  
Mail, for recycling.  
Dispose of unwanted electronics through an approved recycler.  
To find the nearest recycling location, go to our website:  
Or call, (877) 278-0799.  
Follow local regulations regarding disposal of mobile devices and batteries  
Dispose of your mobile device and batteries in accordance with local regulations.  
In some areas, the disposal of these items in household or business trash may be  
prohibited. Help us protect the environment - recycle!  
Warning!: Never dispose of batteries in a fire because they may explode.  
138  
UL Certified Travel Charger  
The Travel Charger for this phone has met applicable UL safety requirements.  
Please adhere to the following safety instructions per UL guidelines:  
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD TO SERIOUS  
PERSONAL INJURY AND POSSIBLE PROPERTY DAMAGE.  
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS.  
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY  
FOLLOW THESE INSTRUCTIONS.  
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE AN  
ATTACHMENT PLUG ADAPTOR OF THE PROPER CONFIGURATION FOR  
THE POWER OUTLET.  
THIS POWER UNIT IS INTENDED TO BE CORRECTLY ORIENTED IN A  
VERTICAL OR HORIZONTAL OR FLOOR MOUNT POSITION.  
Display / Touch-Screen  
Please note the following information when using your mobile device:  
WARNING REGARDING DISPLAY  
The display on your mobile device is made of glass or acrylic and could break  
if your mobile device is dropped or if it receives significant impact. Do not use  
if screen is broken or cracked as this could cause injury to you.  
WARRANTY DISCLAIMER: PROPER USE OF A TOUCH-SCREEN MOBILE DEVICE  
If your mobile device has a touch-screen display, please note that a touch-  
screen responds best to a light touch from the pad of your finger or a non-  
metallic stylus. Using excessive force or a metallic object when pressing on  
the touch-screen may damage the tempered glass surface and void the  
warranty.  
Health and Safety Information  
139  
   
GPS & AGPS  
Certain Samsung mobile devices can use a Global Positioning System (GPS) signal  
for location-based applications. A GPS uses satellites controlled by the U.S.  
Government that are subject to changes implemented in accordance with the  
Department of Defense policy and the 2008 Federal Radio navigation Plan (FRP).  
Changes may affect the performance of location-based technology on your mobile  
device.  
Certain Samsung mobile devices can also use an Assisted Global Positioning  
System (AGPS), which obtains information from the cellular network to improve GPS  
performance. AGPS uses your wireless service provider's network and therefore  
airtime, data charges, and/or additional charges may apply in accordance with your  
service plan. Contact your wireless service provider for details.  
Your Location  
Location-based information includes information that can be used to determine the  
approximate location of a mobile device. Mobile devices which are connected to a  
wireless network transmit location-based information. Additionally, if you use  
applications that require location-based information (e.g. driving directions), such  
applications transmit location-based information. The location-based information  
may be shared with third-parties, including your wireless service provider,  
applications providers, Samsung, and other third-parties providing services.  
Use of AGPS in Emergency Calls  
When you make an emergency call, the cellular network may activate AGPS  
technology in your mobile device to tell the emergency responders your  
approximate location.  
AGPS has limitations and might not work in your area. Therefore:  
Always tell the emergency responder your location to the best of your ability; and  
Remain on the mobile device for as long as the emergency responder instructs you.  
140  
 
Navigation  
Maps, directions, and other navigation-data, including data relating to your current  
location, may contain inaccurate or incomplete data, and circumstances can and do  
change over time. In some areas, complete information may not be available.  
Therefore, you should always visually confirm that the navigational instructions are  
consistent with what you see before following them. All users should pay attention to  
road conditions, closures, traffic, and all other factors that may impact safe driving or  
walking. Always obey posted road signs  
.
Emergency Calls  
This mobile device, like any wireless mobile device, operates using radio signals,  
wireless and landline networks, as well as user-programmed functions, which  
cannot guarantee connection in all conditions, areas, or circumstances. Therefore,  
you should never rely solely on any wireless mobile device for essential  
communications (medical emergencies, for example). Before traveling in remote or  
underdeveloped areas, plan an alternate method of contacting emergency services  
personnel. Remember, to make or receive any calls, the mobile device must be  
switched on and in a service area with adequate signal strength.  
Emergency calls may not be possible on all wireless mobile device networks or  
when certain network services and/or mobile device features are in use. Check with  
local service providers.  
To make an emergency call:  
1. If the mobile device is not on, switch it on.  
2. Key in the emergency number for your present location (for example, 911 or  
other official emergency number). Emergency numbers vary by location.  
3. Press the “Send” key ( ).  
Health and Safety Information  
141  
 
If certain features are in use (call blocking, for example), you may first need to  
deactivate those features before you can make an emergency call. Consult your  
User Manual and your local cellular service provider. When making an emergency  
call, remember to give all the necessary information as accurately as possible.  
Remember that your mobile device may be the only means of communication at the  
scene of an accident; do not cut off the call until given permission to do so.  
Care and Maintenance  
Your mobile device is a product of superior design and craftsmanship and should be  
treated with care. The suggestions below will help you fulfill any warranty  
obligations and allow you to enjoy this product for many years:  
Keep your Samsung Mobile Device away from:  
Liquids of any kind  
Keep the mobile device dry. Precipitation, humidity, and liquids contain minerals  
that will corrode electronic circuits. If the mobile device does get wet, do not  
accelerate drying with the use of an oven, microwave, or dryer, because this may  
damage the mobile device and could cause a fire or explosion. Do not use the  
mobile device with a wet hand. Doing so may cause an electric shock to you or  
damage to the mobile device.  
Extreme heat or cold  
Avoid temperatures below 0°C / 32°F or above 45°C / 113°F.  
Microwaves  
Do not try to dry your mobile device in a microwave oven. Doing so may cause a  
fire or explosion.  
Dust and dirt  
Do not expose your mobile device to dust, dirt, or sand.  
142  
 
Cleaning solutions  
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the  
mobile device. Wipe it with a soft cloth slightly dampened in a mild soap-and-  
water solution.  
Shock or vibration  
Do not drop, knock, or shake the mobile device. Rough handling can break  
internal circuit boards.  
Paint  
Do not paint the mobile device. Paint can clog the device’s moving parts or  
ventilation openings and prevent proper operation.  
Responsible Listening  
Caution!: Avoid potential hearing loss  
.
Damage to hearing occurs when a person is exposed to loud sounds over time. The  
risk of hearing loss increases as sound is played louder and for longer durations.  
Prolonged exposure to loud sounds (including music) is the most common cause of  
preventable hearing loss. Some scientific research suggests that using portable  
audio devices, such as portable music players and cell phones, at high volume  
settings for long durations may lead to permanent noise-induced hearing loss. This  
includes the use of headphones (including headsets, earbuds, and Bluetooth® or  
other wireless devices). Exposure to very loud sound has also been associated in  
some studies with tinnitus (a ringing in the ear), hypersensitivity to sound, and  
distorted hearing. Individual susceptibility to noise-induced hearing loss and  
potential hearing problem varies. Additionally, the amount of sound produced by a  
portable audio device varies depending on the nature of the sound, the device  
settings, and the headphones that are used. As a result, there is no single volume  
setting that is appropriate for everyone or for every combination of sound, settings,  
and equipment.  
Health and Safety Information  
143  
 
You should follow some common sense recommendations when using any portable  
audio device:  
Always turn the volume down before plugging the earphones into an audio source.  
Set the volume in a quiet environment and select the lowest volume at which you can hear  
adequately.  
Be aware that you can adapt to higher volume settings over time, not realizing that the  
higher volume may be harmful to your hearing.  
When using headphones, turn the volume down if you cannot hear the people speaking  
near you or if the person sitting next to you can hear what you are listening to.  
Do not turn the volume up to block out noisy surroundings. If you choose to listen to your  
portable device in a noisy environment, use noise-cancelling headphones to block out  
background environmental noise. By blocking background environment noise, noise  
cancelling headphones should allow you to hear the music at lower volumes than when  
using earbuds.  
Limit the amount of time you listen. As the volume increases, less time is required before  
you hearing could be affected.  
Avoid using headphones after exposure to extremely loud noises, such as rock concerts,  
that might cause temporary hearing loss. Temporary hearing loss might cause unsafe  
volumes to sound normal.  
Do not listen at any volume that causes you discomfort. If you experience ringing in your  
ears, hear muffled speech, or experience any temporary hearing difficulty after listening to  
your portable audio device, discontinue use and consult your doctor.  
144  
You can obtain additional information on this subject from the following sources:  
American Academy of Audiology  
11730 Plaza American Drive, Suite 300  
Reston, VA 20190  
Voice: (800) 222-2336  
National Institute on Deafness and Other Communication Disorders  
National Institutes of Health  
31 Center Drive, MSC 2320  
Bethesda, MD 20892-2320  
Internet: http://www.nidcd.nih.gov/  
Health and Safety Information  
145  
National Institute for Occupational Safety and Health (NIOSH)  
395 E Street, S.W.  
Suite 9200  
Patriots Plaza Building  
Washington, DC 20201  
Voice: 1-800-35-NIOSH (1-800-356-4674)  
1-800-CDC-INFO (1-800-232-4636)  
Outside the U.S. 513-533-8328  
Internet: http://www.cdc.gov/niosh/topics/noise/default.html  
1-888-232-6348 TTY  
Operating Environment  
Remember to follow any special regulations in force in any area, and always switch  
your mobile device off whenever it is forbidden to use it, or when it may cause  
interference or danger. When connecting the mobile device or any accessory to  
another device, read its user's guide for detailed safety instructions. Do not connect  
incompatible products.  
Using Your Mobile Device Near Other Electronic Devices  
Most modern electronic equipment is shielded from Radio Frequency (RF) signals.  
However, certain electronic equipment may not be shielded against the RF signals  
from your wireless mobile device. Consult the manufacturer to discuss alternatives.  
146  
 
Implantable Medical Devices  
A minimum separation of six (6) inches should be maintained between a handheld  
wireless mobile device and an implantable medical device, such as a pacemaker or  
implantable cardioverter defibrillator, to avoid potential interference with the device.  
Persons who have such devices:  
Should ALWAYS keep the mobile device more than six (6) inches from their implantable  
medical device when the mobile device is turned ON;  
Should not carry the mobile device in a breast pocket;  
Should use the ear opposite the implantable medical device to minimize the potential for  
interference;  
Should turn the mobile device OFF immediately if there is any reason to suspect that  
interference is taking place;  
Should read and follow the directions from the manufacturer of your implantable  
medical device. If you have any questions about using your wireless mobile device  
with an implantable medical device, consult your health care provider.  
For more information see: http://www.fcc.gov/oet/rfsafety/rf-faqs.html#  
.
Other Medical Devices  
If you use any other personal medical devices, consult the manufacturer of your  
device to determine if it is adequately shielded from external RF energy. Your  
physician may be able to assist you in obtaining this information. Switch your  
mobile device off in health care facilities when any regulations posted in these  
areas instruct you to do so. Hospitals or health care facilities may be using  
equipment that could be sensitive to external RF energy.  
Health and Safety Information  
147  
Vehicles  
RF signals may affect improperly installed or inadequately shielded electronic  
systems in motor vehicles. Check with the manufacturer or its representative  
regarding your vehicle before using your mobile device in a motor vehicle. You  
should also consult the manufacturer of any equipment that has been added to  
your vehicle.  
Posted Facilities  
Switch your mobile device off in any facility where posted notices require you  
to do so.  
Potentially Explosive Environments  
Switch your mobile device off when in any area with a potentially explosive  
atmosphere and obey all signs and instructions. Sparks in such areas could cause  
an explosion or fire resulting in bodily injury or even death. Users are advised to  
switch the mobile device off while at a refueling point (service station). Users are  
reminded of the need to observe restrictions on the use of radio equipment in fuel  
depots (fuel storage and distribution areas), chemical plants, or where blasting  
operations are in progress. Areas with a potentially explosive atmosphere are often,  
but not always, clearly marked. They include below deck on boats, chemical  
transfer or storage facilities, vehicles using liquefied petroleum gas (such as  
propane or butane), areas where the air contains chemicals or particles, such as  
grain, dust, or metal powders, and any other area where you would normally be  
advised to turn off your vehicle engine.  
When your Device is Wet  
Do not turn on your device if it is wet. If your device is already on, turn it off and  
remove the battery immediately (if the device will not turn off or you cannot remove  
the battery, leave it as-is). Then, dry the device with a towel and take it to a  
service center.  
148  
Restricting Children's Access to Your  
Mobile Device  
Your mobile device is not a toy. Do not allow children to play with it because they  
could hurt themselves and others, damage the mobile device, or make calls that  
increase your mobile device bill.  
Keep the mobile device and all its parts and accessories out of the reach of  
small children.  
FCC Notice and Cautions  
FCC Notice  
The mobile device may cause TV or radio interference if used in close proximity  
to receiving equipment. The FCC can require you to stop using the mobile device  
if such interference cannot be eliminated. Vehicles using liquefied petroleum  
gas (such as propane or butane) must comply with the National Fire Protection  
Standard (NFPA-58). For a copy of this standard, contact the National Fire  
Protection Association.  
Cautions  
Any changes or modifications to your mobile device not expressly approved in this  
document could void your warranty for this equipment and void your authority to  
operate this equipment. Only use approved batteries, antennas, and chargers. The  
use of any unauthorized accessories may be dangerous and void the mobile device  
warranty if said accessories cause damage or a defect to the mobile device.  
Although your mobile device is quite sturdy, it is a complex piece of equipment and  
can be broken. Avoid dropping, hitting, bending, or sitting on it.  
Health and Safety Information  
149  
   
Other Important Safety Information  
Only qualified personnel should service the mobile device or install the mobile device in a  
vehicle. Faulty installation or service may be dangerous and may invalidate any warranty  
applicable to the device.  
Ensure that any mobile devices or related equipment installed in your vehicle are securely  
mounted.  
Check regularly that all wireless mobile device equipment in your vehicle is mounted and  
operating properly.  
When using a headset in dry environments, static electricity can build up in the headset  
and cause a small quick static electrical shock. To minimize the risk of electrostatic  
discharge from the headset avoid using the headset in extremely dry environments or  
touch a grounded unpainted metal object to discharge static electricity before inserting  
the headset.  
Do not store or carry flammable liquids, gases, or explosive materials in the same  
compartment as the mobile device, its parts, or accessories.  
For vehicles equipped with an air bag, remember that an air bag inflates with great force.  
Do not place objects, including installed or portable wireless equipment near or in the area  
over the air bag or in the air bag deployment area. If wireless equipment is improperly  
installed and the air bag inflates, serious injury could result.  
Switch your mobile device off before boarding an aircraft. The use of wireless mobile  
devices in aircraft is illegal and may be dangerous to the aircraft's operation. Check with  
appropriate authorities before using any function of a mobile device while on an aircraft.  
Failure to observe these instructions may lead to the suspension or denial of cell phone  
services to the offender, or legal action, or both.  
While using your device, leave some lights on in the room and do not hold the screen too  
close to your eyes.  
Seizures or blackouts can occur when you are exposed to flashing lights while watching  
videos or playing games for extended periods. If you feel any discomfort, stop using the  
device immediately.  
150  
 
Reduce risk of repetitive motion injuries. When you repetitively perform actions, such as  
pressing keys, drawing characters on a touch screen with your fingers, or playing games,  
you may experience occasional discomfort in your hands, neck, shoulders, or other parts of  
your body. When using your device for extended periods, hold the device with a relaxed  
grip, press the keys lightly, and take frequent breaks. If you continue to have discomfort  
during or after such use, stop use and see a physician.  
If your device has a camera flash or light, do not use the flash or light close to the eyes of  
people or pets. [122011]  
Health and Safety Information  
151  

Yamaha CD REWRITABLE DRIVE CRW8824S User Manual
VIPowER VPM 6228H User Manual
Sony KDX 565MXRF User Manual
Sony DVP S500D User Manual
Sony CD Player RDR VX560 User Manual
Seagate U4 ST34311A User Manual
Samsung GT C3010S User Manual
Radio Shack 63 995 User Manual
Philips coffee maker flavor select HD7612 User Manual
Nokia Cell Phone 6260 User Manual